Wiki source code of Hardware Requirements and Supported Hardware

Version 22.1 by Mark Kohlmann on 2022/02/15 20:38

version	line-number	content
1.1	1	SHOWRUNNER™ runs on Crestron 3-series and 4-series control systems.
	2
	3
	4	=== Minimum Requirements ===
	5
16.1	6	* Dedicated 3-series (DIN-AP3/CP3/CP3N/AV3/PRO3/RMC3) or 4-series control system. Running other programs on the processor is not recommended. VC-4 is also supported.
4.1	7	* Due to hardware/firmware differences the MC3 is not recommended and has not been tested.
1.1	8
	9	=== Supported Hardware ===
	10
	11	SHOWRUNNER™ supports a large collection of Crestron hardware and lighting related products.
	12
16.1	13	* Cresnet Bridges: CAEN-BLOCK-CENCN-2-POE/DIN-CENCN-2(-POE)/CSA-PWS10S-HUB-ENET/ZUMNET-JBOX
1.1	14	* Lighting Controllers:
15.1	15	** Crestron CLS-C6 (Scene Recall/Load Control)
	16	** Crestron CLF/CLFI
	17	** Crestron CLW-Series: CLW-DELVEX-E, CLW-DELVEX-P, CLW-DIMEX-E, CLW-DIMEX-P, CLW-DIMFLVEX-P, CLW-DIMSWEX-E, CLW-DIMSWEX-P, CLW-LDIMEX1/2, CLW-LSWEX1/2
1.1	18	** Crestron CLX-Series: CLX-1DELV4, CLX-1DIM4, CLX-1DIMU4, CLX-1DIMU4-HP, CLX-1DIM8, CLX-2DIM8, CLX-2DIMU8, CLX-2DIM2, CLX-2DIMFLV8, CLX-4HSW4, CLX-1FAN4 (As a load)
	19	** Crestron DIN-Series: DIN-DALI-2, DIN-AO8, DIN-1DIM4, DIN-1DIMU4, DIN-4DIMLV4, DIN-8SW8, DIN-8SW8-I, DIN-2LEDPWM8
15.1	20	** Crestron GL-CAEN (See Crestron CLX)
1.1	21	** Crestron GL-EXP-Series: GL-EXP-DIMU-CN, GL-EXP-DIMFDB-CN, GL-EXP-DIMFLV-CN, GL-EXP-SWCN
	22	** Crestron GLPP-Series: GLPP-DIMFLVCN-PM, GLPP-1DIMFLV(2\|3)CN-PM, GLPP-SWCN, GLPP-1SW(2\|3)CN
	23	** Crestron GLX-Series: GLX-DIM6, GLX-DIMFLV8, GLX-HSW8
	24	** Crestron GLXP-Series: GLXP-DIMFLV8, GLXP-HSW12, GLXP-HSW8, GLXP-SW10, GLXP-SW16, GLXX-2DIM8, GLXX-CTRL
	25	** Crestron GLPAC-Series (via EISC): 4 or 8 channel, supports GLPAC Occupancy and Photocell inputs, and locally attached Cresnet expansion modules
	26	** Crestron GL-IPAC (via EISC): 8 channel, supports local Occupancy and Photocell inputs, and locally attached Cresnet expansion modules
16.1	27	** Crestron HZ-*EX Series
1.1	28	** Crestron EISC: Loads directly attached to an EISC with RCB support (3-series or classic)
15.1	29	** Crestron Relay: Any low voltage Crestron relay
1.1	30	** Crestron ZUMMESH Wireless: Entire Zum Wireless product line with direct load control, occupancy, photocell via ZUMMESH-NETBRIDGE
	31	** Crestron ZUMMESH-AVBRIDGE (via Serial Port): Direct Load Control, Keypad, Occupancy, Photocell
9.1	32	** Crestron Zum Wired NET/LINK controllers and keypads
1.1	33	** DMX: sACN, Art-Net (RDM Addressing Supported), Pharos LPC Series (Fixture/Group Control and Timeline Playback)
15.1	34	** 3rd Party
	35	*** BACnet: Remote BACnet load
	36	*** Lutron: Integration Protocol Loads and Areas via RS-232 or IP
	37	*** Philips iPlayer3: Master Intensity and Show Playback
	38	*** WTEC SmartDirector/SmartEngine: Locations as loads or area and Fixtures as loads
1.1	39	* Keypads
	40	** C2N-CBD Series
6.1	41	** C2N-CBF Series
1.1	42	** C2N-LCDB3
6.1	43	** C2NI-CB
	44	** CNX-Bx Series
1.1	45	** CLW-Series
15.1	46	** CLWI-Series
13.1	47	** GLPPA-KP (KP1/KP2/KP3/KP4 are NOT supported for programming due to hardware limitation)
6.1	48	** HTT-B10EX
	49	** HTT-B2EX
15.1	50	** HZ-KPCN/EX
	51	** HZ-*EX Load Controllers
1.1	52	** INET-CBDEX
9.1	53	** ZUMLINK-KP
1.1	54	** Zum AV Keypad via AVBRIDGE
	55	* Occupancy Sensors
	56	** Cresnet Sensors: GLS-ODT-C-CN, GLS-OIR-C-CN, GLS-OIRLCL-C-CN
15.1	57	** Steinel Sensors (via Contact Closure)
1.1	58	** Wireless Sensors: GLS-OIR-CSM-EX-BATT
	59	** Zum Wireless: NETBRIDGE or AVBRIDGE (via Serial Port)
	60	** Non-System: Contact Closure via GLS-SIM, C2N-CBD-P, GLPP, GLPAC/GL-IPAC, DIN-IO8, or EISC
	61	*** Crestron NS sensors
	62	*** Steinel
	63	*** Third-Party Sensors
	64	* Photocells
	65	** Daylight Harvesting: GLS-LOL, GLS-LCL, GLS-LCCT (not recommended for harvesting), GLS-LDL-EX-BATT, 3rd Party 0-10V Open or Closed Loop connected via GLS-SIM, C2N-CBD-P, GLS-ODT-C-CN, GLPP, GLPAC, DIN-IO8, or Processor
	66	** Exterior: GLS-LEXT via GLS-SIM, C2N-CBD-P, DIN-IO8, or Processor. GLS-LCCT (SolarSync)
	67	** SolarSync/CCT: GLS-LCCT
	68	* Partition Sensors
	69	** GLS-PART-CN (Supports Sensitivity Adjustment)
	70	** 3rd Party via Versiport (GLS-SIM/DIN-IO8/GLPAC)
	71	* Override Input: Keyswitches/FACP/Power Loss Sensor/Alarm/Emergency Input/Demand Response
	72	** Keyswitch: Maintained or Momentary via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor
	73	** External Input: Maintained (Invertable) via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor
7.1	74	* Shades
	75	** Crestron: C2N-SDC, CSC series, CSM/CSMI Series (QMT), Relay/Versiport, EISC
15.1	76	** DraperFlex: HTTP via Gateway
8.1	77	** Lutron: Sivoia QS, Quantum (Telnet/RS-232)
15.1	78	** Mecho: MechoNET (RS-232), SolarTrac4 (BACnet)
	79	** Somfy: SDN [UAI+ RS-232/Telnet \| POE Gateway \| RS-485], RTS (URTSII RS-232/RS-485)
1.1	80	* User Interfaces
	81	** Crestron App - iPhone (Local control only, no setup)
	82	** Crestron App - iPad Landscape
	83	** XPanel Executable (Smart Graphics)
15.1	84	** SHOWRUNNER™ Hub HTML5 UI (v3.0 and greater)
20.1	85	** TSW-750/752/760/770
	86	** TSW-1050/1052/1060/1070
	87	** TSW-560/570 (Local control only, no setup)*
	88	** TSW-560P/570P (Local control only, no setup)*
	89
	90
	91	*TSW 570 UI: No setup option, only splash and area select/control
	92
	93	[[image:MicrosoftTeams-image316c8d50d322901fc07d30c8922806254932f267ae5a223d5e797018dcf331fb.png\|\|height="422" width="750"]]
	94
	95
	96
	97	*TSW 570P: Vertical sliders with horizontal scrolling
	98
	99	[[image:MicrosoftTeams-image3e8f52a09e1ed115f0557f825fe3c151f77c2079e13fc1d711e582028891ca61.png\|\|height="750" width="421"]]
	100
	101