Wiki source code of Hardware Requirements and Supported Hardware
Version 11.1 by Mark Kohlmann on 2021/05/24 23:01
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
| |
1.1 | 1 | SHOWRUNNER™ runs on Crestron 3-series and 4-series control systems. |
| 2 | |||
| 3 | |||
| 4 | === Minimum Requirements === | ||
| 5 | |||
| 6 | * Dedicated 3-series (DIN-AP3/CP3/CP3N/AV3/PRO3/RMC3) or 4-series control system. Running other programs on the processor is not recommended. | ||
| |
4.1 | 7 | * Due to hardware/firmware differences the MC3 is not recommended and has not been tested. |
| |
1.1 | 8 | |
| 9 | === Supported Hardware === | ||
| 10 | |||
| 11 | SHOWRUNNER™ supports a large collection of Crestron hardware and lighting related products. | ||
| 12 | |||
| 13 | * Cresnet Bridges: CAEN-BLOCK-CENCN-2-POE/DIN-CENCN-2(-POE)/CSA-PWS10S-HUB-ENET | ||
| 14 | * Lighting Controllers: | ||
| 15 | ** Crestron CLX-Series: CLX-1DELV4, CLX-1DIM4, CLX-1DIMU4, CLX-1DIMU4-HP, CLX-1DIM8, CLX-2DIM8, CLX-2DIMU8, CLX-2DIM2, CLX-2DIMFLV8, CLX-4HSW4, CLX-1FAN4 (As a load) | ||
| 16 | ** Crestron DIN-Series: DIN-DALI-2, DIN-AO8, DIN-1DIM4, DIN-1DIMU4, DIN-4DIMLV4, DIN-8SW8, DIN-8SW8-I, DIN-2LEDPWM8 | ||
| 17 | ** Crestron GL-EXP-Series: GL-EXP-DIMU-CN, GL-EXP-DIMFDB-CN, GL-EXP-DIMFLV-CN, GL-EXP-SWCN | ||
| 18 | ** Crestron GLPP-Series: GLPP-DIMFLVCN-PM, GLPP-1DIMFLV(2|3)CN-PM, GLPP-SWCN, GLPP-1SW(2|3)CN | ||
| 19 | ** Crestron GLX-Series: GLX-DIM6, GLX-DIMFLV8, GLX-HSW8 | ||
| 20 | ** Crestron GLXP-Series: GLXP-DIMFLV8, GLXP-HSW12, GLXP-HSW8, GLXP-SW10, GLXP-SW16, GLXX-2DIM8, GLXX-CTRL | ||
| 21 | ** Crestron CLS-C6 (Scene Recall/Load Control) | ||
| 22 | ** Crestron CLW-Series: CLW-DELVEX-E, CLW-DELVEX-P, CLW-DIMEX-E, CLW-DIMEX-P, CLW-DIMFLVEX-P, CLW-DIMSWEX-E, CLW-DIMSWEX-P, CLW-LDIMEX1/2, CLW-LSWEX1/2 | ||
| 23 | ** Crestron GLPAC-Series (via EISC): 4 or 8 channel, supports GLPAC Occupancy and Photocell inputs, and locally attached Cresnet expansion modules | ||
| 24 | ** Crestron GL-IPAC (via EISC): 8 channel, supports local Occupancy and Photocell inputs, and locally attached Cresnet expansion modules | ||
| 25 | ** Crestron EISC: Loads directly attached to an EISC with RCB support (3-series or classic) | ||
| 26 | ** Crestron ZUMMESH Wireless: Entire Zum Wireless product line with direct load control, occupancy, photocell via ZUMMESH-NETBRIDGE | ||
| 27 | ** Crestron ZUMMESH-AVBRIDGE (via Serial Port): Direct Load Control, Keypad, Occupancy, Photocell | ||
| |
9.1 | 28 | ** Crestron Zum Wired NET/LINK controllers and keypads |
| |
1.1 | 29 | ** DMX: sACN, Art-Net (RDM Addressing Supported), Pharos LPC Series (Fixture/Group Control and Timeline Playback) |
| 30 | * Keypads | ||
| 31 | ** C2N-CBD Series | ||
| |
6.1 | 32 | ** C2N-CBF Series |
| |
1.1 | 33 | ** C2N-LCDB3 |
| |
6.1 | 34 | ** C2NI-CB |
| 35 | ** CNX-Bx Series | ||
| |
1.1 | 36 | ** CLW-Series |
| |
11.1 | 37 | ** GLPPA-KP (KP1/KP2/KP3/KP4 not supported for programming due to hardware limitation) |
| |
6.1 | 38 | ** HTT-B10EX |
| 39 | ** HTT-B2EX | ||
| |
1.1 | 40 | ** HZ-KPCN |
| 41 | ** INET-CBDEX | ||
| |
9.1 | 42 | ** ZUMLINK-KP |
| |
1.1 | 43 | ** Zum AV Keypad via AVBRIDGE |
| 44 | * Occupancy Sensors | ||
| 45 | ** Cresnet Sensors: GLS-ODT-C-CN, GLS-OIR-C-CN, GLS-OIRLCL-C-CN | ||
| 46 | ** Wireless Sensors: GLS-OIR-CSM-EX-BATT | ||
| 47 | ** Zum Wireless: NETBRIDGE or AVBRIDGE (via Serial Port) | ||
| 48 | ** Non-System: Contact Closure via GLS-SIM, C2N-CBD-P, GLPP, GLPAC/GL-IPAC, DIN-IO8, or EISC | ||
| 49 | *** Crestron NS sensors | ||
| 50 | *** Steinel | ||
| 51 | *** Third-Party Sensors | ||
| 52 | * Photocells | ||
| 53 | ** Daylight Harvesting: GLS-LOL, GLS-LCL, GLS-LCCT (not recommended for harvesting), GLS-LDL-EX-BATT, 3rd Party 0-10V Open or Closed Loop connected via GLS-SIM, C2N-CBD-P, GLS-ODT-C-CN, GLPP, GLPAC, DIN-IO8, or Processor | ||
| 54 | ** Exterior: GLS-LEXT via GLS-SIM, C2N-CBD-P, DIN-IO8, or Processor. GLS-LCCT (SolarSync) | ||
| 55 | ** SolarSync/CCT: GLS-LCCT | ||
| 56 | * Partition Sensors | ||
| 57 | ** GLS-PART-CN (Supports Sensitivity Adjustment) | ||
| 58 | ** 3rd Party via Versiport (GLS-SIM/DIN-IO8/GLPAC) | ||
| 59 | * Override Input: Keyswitches/FACP/Power Loss Sensor/Alarm/Emergency Input/Demand Response | ||
| 60 | ** Keyswitch: Maintained or Momentary via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor | ||
| 61 | ** External Input: Maintained (Invertable) via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor | ||
| |
7.1 | 62 | * Shades |
| 63 | ** Crestron: C2N-SDC, CSC series, CSM/CSMI Series (QMT), Relay/Versiport, EISC | ||
| |
8.1 | 64 | ** Lutron: Sivoia QS, Quantum (Telnet/RS-232) |
| 65 | ** Mecho: MechoNET (RS-232) | ||
| 66 | ** Somfy: SDN (UAI+ RS-232/Telnet), RTS (URTSII RS-232/RS-485) | ||
| |
1.1 | 67 | * User Interfaces |
| |
9.1 | 68 | ** TSW-560/570 (Local control only, no setup) |
| 69 | ** TSW-560P/570P (Local control only, no setup) | ||
| 70 | ** TSW-750/752/760/770 | ||
| 71 | ** TSW-1050/1052/1060/1070 | ||
| |
1.1 | 72 | ** Crestron App - iPhone (Local control only, no setup) |
| 73 | ** Crestron App - iPad Landscape | ||
| 74 | ** XPanel Executable (Smart Graphics) |