Changes for page Features

Last modified by Scott Kohlmann on 2023/04/21 15:15

From 4.1 to 3.1 From 5.1 to 4.2

From version 4.2

edited by Mark Kohlmann
on 2022/10/14 18:39

Change comment: There is no comment for this version

To version 4.1

edited by Mark Kohlmann
on 2020/09/02 21:04

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -1,11 +1,10 @@
--SHOWRUNNER™ has a large number of features focused on the needs of the commercial lighting and hospitality markets and is adaptable to the residential market.
++SHOWRUNNER™ has a large number of features focused on the needs of the commercial lighting market.
--==== Area Features ====
++=== Features ===
--* Lighting Loads
--* Scene recall
--* Master raise/lower
--* User configurable scene name, fade time, and load include by scene
++* Lighting Controls grouped into Areas
++* Scene recall and master raise/lower by area
++* User configurable scene name, fade time, and load include by area
  * Individual load control within an area
  * Select area from touchpanel, areas can be restricted by panel
  * RGB controls for applicable fixtures, saved per scene
@@ -14,207 +14,78 @@
  ** CCT Control per area for applicable fixtures
  ** Global schedule for CCT, astronomical and/or fixed schedules
  ** Manual CCT override per area
--** Crestron GLS-LCCT (SolarSync™) sensor integration for daylight tracking
--* Demand Response with ability to exclude area from Demand Response event
--* Configurable load grouping allows aggregation of loads to a single slider per group, can include linked areas
--* HVAC Control
--* Shades
--* Occupancy Features
--** Occupancy Modes
--*** Occupancy
--*** Vacancy
--*** Disabled
--*** Use Hardware Logic (if supported by edge controller)
--** Extend occupancy timeout by user specified seconds, can be scheduled
--** Configurable occupied and vacant scenes, scheduled
--** Configurable grace occupancy support without needing support in hardware
--* After Hours support for automatic shutoff after configurable timeout w/ alerting
--* Parent Area feature allows one area to trickle down scene recall and raise/lower (if enabled)
--* Last Scene Recall timestamp and triggering action recorded
--
--==== Load Features ====
--
--* Dynamically assigned/unassigned at runtime to areas
--* Supported load types
--** Single Channel
--** Dynamic White/CCT
--*** Warm/Cool
--*** Intensity/CCT
--*** DALI Type 8
--*** Pharos Dynamic White
--** RGB/W/A
--*** Color Picker
--*** W/A channels can be controlled individually or mixed (Pharos)
--* Supported load behaviors
--** Dimmable
--** Switched
--** Plug Load
--* Dimming Curves
--** Unaffected
--** Linear
--** Linear No Zero Pass (support for EM lights that are not allowed to turn off i.e. Chicago 10%)
--** Logarithmic
--** Non Dim
--** S Curve
--** Soft Linear
--** Square
--** Always On
--** Inverse Log
--** Custom based on input output ranges
--* Min/Mix Trim, performed in hardware if supported
--* Override Level, performed in hardware if supported
--* Unoccupied Level
--* Demand Response Level
--* Enable/Disable/Override states
--* Option to ignore long fade times if the loads is off
--* Option recall last level
--* Individual daylight harvesting settings, enabled/disabled by scene
--** Open/closed loop
--** Min/Max levels
--** Sensitivity
--** Fade time
--* Loads may track other loads
--* Remap channels for unusual fixture channel mappings
--* Raise/lower, performed with software fade engine if not supported by hardware
--* Dynamic White/Circadian Rhythm CCT
  ** Custom CCT curves per load or default algorithm
  ** Min/Max CCT per load
  ** Support for Warm/Cool or Intensity/CCT fixture types
  ** Configurable automatic fixture shut off if outside CCT range
--** Crestron GLS-LCCT (SolarSync™) sensor integration for daylight tracking
--* Load flashing for identification
--* Verified timestamp option
--* DALI (DIN-DALI-2/ZUMNET-JBOX-DALI Legacy mode)
--** Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
--
--(% class="wikigeneratedid" %)
--==== Scheduling Features ====
--
--* Algorithm based scheduling engine ensures predictable operation year after year with no need to specifically specify each day
--* Area and/or Tag based schedules
--* Individual global events or grouped events
--* showrunner™ HUB UI Features
--** Day/Week/Month/Time Grid views display all events calculated by the scheduler engine
--** Tree based event/event groups
--** View Built-In Calendars and Groups
--** Create/Edit/Delete Custom Calendars and Groups
--* Execute last event on startup (configurable) to bring system in to correct state
--* Configurable Actions
--** Scene w/ option to override fade time
--** Change Keypad State (Enable/Disable/Disable Off)
--** Change Occupancy Mode (Occupancy/Vacancy/Disable/Last/Use Hardware)
--** Switch between Normal and After Hours (for Timeout)
--** Change CCT Mode (Auto/Manual)
--** Assign Manual CCT
--** Extend Occupancy Timeout setting
--** Change Scenes Recalled by Occupied/Vacant/On/Off
--** Shade Command (Open/Close)
--** Plug Load Mode (Off/On/Auto)
--* Copy Actions from Area to Area
--* AM, PM, and Relative to Astronomical (Sunrise/Sunset) Time References
--* Event Verification by Date in real-time with month calendar view and event description
--* Require a scene to be active before recalling the scheduled scene (optional)
--* Advanced Scheduling Feature (Licensed)
--** Event Include and/or Exclude by Calendar(s) and/or Calendar Group(s)
--** Calendar Groups consist of one or more Calendars
--** Calendars can be based on a Date Range or Date Pattern
--** Calendar Properties:
--*** Date Range:
--**** Start and End Dates
--**** Specific Dates selected using Date Picker
--**** Recur Annually Option
--*** Date Pattern:
--**** Year - Restrict to specific year or none
--**** Month - Restrict to specific Month(s) or none
--**** Week - Restrict to specific Week of the month or none
--**** Week Day - Restrict to specific day of the week or none
--**** Day - Restrict to a specific day of the month or none
--**** Optional: Offset - Offset date based on restrictions
--**** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
--*** Enable/Disable
--** Pre-loaded with US Federal and common non-Federal US Holidays
--
--=== Supported Hardware Features ===
--
--* Common Settings to all devices
--** Contractor Label
--** Name
--** GlobalId
--** UniqueId (GUID)
++** Crestron GLS-LCCT sensor integration for daylight tracking
++* Sophisticated Scheduling Engine
++** Configurable Actions by Area
++*** Scene
++**** Override Scene Fade Time
++*** Change Keypad State (Enable/Disable/Disable Off)
++*** Change Occupancy Mode (Occupancy/Vacancy/Disable/Last)
++*** Switch between Normal and After Hours (for Timeout)
++*** Change CCT Mode (Auto/Manual)
++*** Assign Manual CCT
++*** Extend Occupancy Timeout
++*** Change Scenes Recalled by Occupied/Vacant/On/Off
++*** Shade Command (Open/Close)
++*** Plug Load Mode (Off/On/Auto)
++** Copy Actions from Area to Area
++** AM, PM, and Astronomical (Sunrise/Sunset) Time References
++** Event Verification by Date in real-time with month calendar view and event description
++** Advanced Scheduling Feature (Licensed)
++*** Event Include and/or Exclude by Calendar(s) and/or Calendar Group(s)
++*** Calendar Groups consist of one or more Calendars
++*** Calendars can be based on a Date Range or Date Pattern
++*** Calendar Properties:
++**** Date Range:
++***** Start and End Dates or Specific Dates selected using Date Picker
++***** Does this Recur Annually
++**** Date Pattern:
++***** Year - Restrict to specific year or none
++***** Month - Restrict to specific Month(s) or none
++***** Week - Restrict to specific Week of the month or none
++***** Week Day - Restrict to specific day of the week or none
++***** Day - Restrict to a specific day of the month or none
++***** Optional: Offset - Offset date based on restrictions
++***** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
++**** Enable/Disable
++*** Pre-loaded with US Federal and common non-Federal US Holidays
  * Keypads
--** Support for common fixed configurations, user assignable at runtime
--** Custom keypads with configurable actions per button at runtime
--*** Graphic based programming using showrunner™ HUB UI
--*** Master raise/lower button support allows assignment of currently selected load/shade/area/etc
--*** Custom button layouts w/ labels to assist with generating engravings
--** Flexible Templating Engine
--*** Create common keypad templates
--*** Apply keypad templates to individual keypads
--**** Remap hardware when template is applied
--**** Optionally exclude specific hardware and/or buttons
++** Support for common fixed configurations, user assignable
++** Custom keypads with configurable actions per button
  ** User configurable area to control
--** Enable/Disable/Disable Off states
--** Prevent disable option
--** Flip raise/lower on common keypad types
--** Configurable hold time support, done in software if not supported by hardware
--** Configurable double tap time support if supported by hardware
--** Simulate keypads from showrunner™ HUB UI or console
--** Direct load mapping for some common keypads
--* Keyswitch and Contact Closure Inputs
--** Supports all versiport and digital inputs
--** Maintained and Momentary supported
--** Feedback output supported
--** Functions
--*** Override
--*** Scene Recall for Active and Inactive States
--*** Demand Response
--*** Actions for Active and Inactive States
  * Occupancy Sensors:
--** Occupancy configuration for CN and ZUMLINK occupancy sensors
++** Occupancy configuration for CN type occupancy sensors
  ** 3rd Party and Non-System occupancy sensor support
--** Occupancy/Vacancy/Disabled/Use Hardware Logic modes, user configurable
++** Occupancy/Vacancy/Disabled modes, user configurable
  ** Configure scenes recalled by area for occupancy and vacancy states
  ** Individual max unoccupied level by load for IECC 2018 C405.2.1.3 compliance
  ** User configurable assignment of sensor to area(s) and load(s)
  ** Occupancy sensors may feed data to multiple areas and loads
--** Last occupied and vacant times recorded
  * Partition sensors
  ** Support for divisible areas
  ** GLS-PART-CN with adjustable sensitivity
--** 3rd party sensor support via hardware inputs
--** User configurable Auto, Combined, and Divided
--** Filtering to ignore noisy partition sensors
--** Change count and last change recorded
--
--==== Energy Efficiency ====
--
++** 3rd party sensor support via versiport input
++** User configurable Auto, Combined, and Divided modes to override occ sensor, activated by UI or keypad
++* Maintained and Momentary Keyswitch/FACP/Override Input for scene recall or override activation
  * Demand Response/Load Shedding
  ** Automatic via sensor input
  ** Manually via keypad
--* Calculated or Measured Power (Watts)
--* Energy Efficiency visualization on floorplan
--
--==== Security ====
--
--* Touchscreens: Global User and Technician Passcodes, user configurable.
--* showrunner™ HUB
--** Role Based permissions by Group
--** Granular Create, Edit, View, Delete, and Execute permissions by Role
--** Users and API Users assignable to groups
--** Restrict Group by area and tag
--** HTTPS enforced
--** Auto session timeout
--** Login via username/password or PIN code
--** Support for Processor or internal user database
--** Best practices for password handling
--* API Users using AWSv4 scheme for authentication per request for maximum security
--
--==== System Settings ====
--
++* Configurable maximum demand response level by load
++* Dynamic addition/deletion/assignment/configuration of loads
++* Dynamic addition/deletion of areas
++* User editable labeling of areas, loads, keypads, occupancy sensors, and schedules
++* Daylight Harvesting sensor to load assignment and settings adjustment
++* Global User and Technician Passcodes, user configurable.
  * User configurable time zone, location, and current time
++* Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
  * Addressing and Verification of Cresnet devices by serial number
  * Cresnet Device Serial Number capture
  * Configurable Global Actions with touchpanel trigger
++* User configurable Crestron EISC Integration with ability to change IP Address and IP-ID of remote Crestron system as well as Areas shared on the fly.  RSD file is automatically generated and link is provided for downloading of RSD file.
  * Remote hardware support from neighbor ShowRunner System:
  ** Allows a master ShowRunner system to integrate slave processors
  ** AV Serial Interface
@@ -232,14 +232,9 @@
  * AV Integration protocol via serial port
  * BACNET Support for integration of Areas, Loads (Licensed Feature)
  * Crestron Fusion (Licensed Feature)
--* E-DMX Receiver
--** SACN or Art-Net
--** Enable/Disable control for loads
--** Map DMX to showrunner loads
--* EISC Export for AV Integration, dynamic creation from the UI (3-series, classic, EISC Client, EISC Server, VC-4 Client)
--* HTTP REST API w/ Authorization
--* Lightweight API provides real-time control/feedback of hardware using CoAP
--* Zum Floor Hub Support for integration, Export showrunner™ areas to the Floor Hub (Licensed Feature)
++* E-DMX Receive - Receive DMX (SACN or Art-Net) and translate to ShowRunner Loads
++* EISC Export for AV Integration, dynamic creation from the UI (3-series or classic)
++* Zum Floor Hub Support for integration, Export SHOWRUNNER™ areas to the Floor Hub (Licensed Feature)
  === Reporting ===