Changes for page Features

Last modified by Scott Kohlmann on 2023/04/21 15:15

From version 4.2
edited by Mark Kohlmann
on 2022/10/14 18:39
Change comment: There is no comment for this version
To version 1.1
edited by Mark Kohlmann
on 2020/04/05 04:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Features
1 +SHOWRUNNER™ Features
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ User Guide & Wiki.WebHome
1 +Main.WebHome
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
1 +XWiki.MarkKohlmann
Content
... ... @@ -1,220 +1,89 @@
1 -SHOWRUNNER™ has a large number of features focused on the needs of the commercial lighting and hospitality markets and is adaptable to the residential market.
1 +SHOWRUNNER™ has a large number of features focused on the needs of the commercial lighting market.
2 2  
3 -==== Area Features ====
3 +=== Features ===
4 4  
5 -* Lighting Loads
6 -* Scene recall
7 -* Master raise/lower
8 -* User configurable scene name, fade time, and load include by scene
5 +* Lighting Controls grouped into Areas
6 +* Scene recall and master raise/lower by area
7 +* User configurable scene name, fade time, and load include by area
9 9  * Individual load control within an area
10 10  * Select area from touchpanel, areas can be restricted by panel
11 11  * RGB controls for applicable fixtures, saved per scene
12 -* Configurable Load Grouping for load consolidation including linked/group area loads
13 13  * Dynamic White/Circadian Rhythm CCT Control
14 14  ** CCT Control per area for applicable fixtures
15 15  ** Global schedule for CCT, astronomical and/or fixed schedules
16 16  ** Manual CCT override per area
17 -** Crestron GLS-LCCT (SolarSync™) sensor integration for daylight tracking
18 -* Demand Response with ability to exclude area from Demand Response event
19 -* Configurable load grouping allows aggregation of loads to a single slider per group, can include linked areas
20 -* HVAC Control
21 -* Shades
22 -* Occupancy Features
23 -** Occupancy Modes
24 -*** Occupancy
25 -*** Vacancy
26 -*** Disabled
27 -*** Use Hardware Logic (if supported by edge controller)
28 -** Extend occupancy timeout by user specified seconds, can be scheduled
29 -** Configurable occupied and vacant scenes, scheduled
30 -** Configurable grace occupancy support without needing support in hardware
31 -* After Hours support for automatic shutoff after configurable timeout w/ alerting
32 -* Parent Area feature allows one area to trickle down scene recall and raise/lower (if enabled)
33 -* Last Scene Recall timestamp and triggering action recorded
34 -
35 -==== Load Features ====
36 -
37 -* Dynamically assigned/unassigned at runtime to areas
38 -* Supported load types
39 -** Single Channel
40 -** Dynamic White/CCT
41 -*** Warm/Cool
42 -*** Intensity/CCT
43 -*** DALI Type 8
44 -*** Pharos Dynamic White
45 -** RGB/W/A
46 -*** Color Picker
47 -*** W/A channels can be controlled individually or mixed (Pharos)
48 -* Supported load behaviors
49 -** Dimmable
50 -** Switched
51 -** Plug Load
52 -* Dimming Curves
53 -** Unaffected
54 -** Linear
55 -** Linear No Zero Pass (support for EM lights that are not allowed to turn off i.e. Chicago 10%)
56 -** Logarithmic
57 -** Non Dim
58 -** S Curve
59 -** Soft Linear
60 -** Square
61 -** Always On
62 -** Inverse Log
63 -** Custom based on input output ranges
64 -* Min/Mix Trim, performed in hardware if supported
65 -* Override Level, performed in hardware if supported
66 -* Unoccupied Level
67 -* Demand Response Level
68 -* Enable/Disable/Override states
69 -* Option to ignore long fade times if the loads is off
70 -* Option recall last level
71 -* Individual daylight harvesting settings, enabled/disabled by scene
72 -** Open/closed loop
73 -** Min/Max levels
74 -** Sensitivity
75 -** Fade time
76 -* Loads may track other loads
77 -* Remap channels for unusual fixture channel mappings
78 -* Raise/lower, performed with software fade engine if not supported by hardware
79 -* Dynamic White/Circadian Rhythm CCT
80 80  ** Custom CCT curves per load or default algorithm
81 81  ** Min/Max CCT per load
82 82  ** Support for Warm/Cool or Intensity/CCT fixture types
83 83  ** Configurable automatic fixture shut off if outside CCT range
84 -** Crestron GLS-LCCT (SolarSync™) sensor integration for daylight tracking
85 -* Load flashing for identification
86 -* Verified timestamp option
87 -* DALI (DIN-DALI-2/ZUMNET-JBOX-DALI Legacy mode)
88 -** Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
89 -
90 -(% class="wikigeneratedid" %)
91 -==== Scheduling Features ====
92 -
93 -* Algorithm based scheduling engine ensures predictable operation year after year with no need to specifically specify each day
94 -* Area and/or Tag based schedules
95 -* Individual global events or grouped events
96 -* showrunner™ HUB UI Features
97 -** Day/Week/Month/Time Grid views display all events calculated by the scheduler engine
98 -** Tree based event/event groups
99 -** View Built-In Calendars and Groups
100 -** Create/Edit/Delete Custom Calendars and Groups
101 -* Execute last event on startup (configurable) to bring system in to correct state
102 -* Configurable Actions
103 -** Scene w/ option to override fade time
104 -** Change Keypad State (Enable/Disable/Disable Off)
105 -** Change Occupancy Mode (Occupancy/Vacancy/Disable/Last/Use Hardware)
106 -** Switch between Normal and After Hours (for Timeout)
107 -** Change CCT Mode (Auto/Manual)
108 -** Assign Manual CCT
109 -** Extend Occupancy Timeout setting
110 -** Change Scenes Recalled by Occupied/Vacant/On/Off
111 -** Shade Command (Open/Close)
112 -** Plug Load Mode (Off/On/Auto)
113 -* Copy Actions from Area to Area
114 -* AM, PM, and Relative to Astronomical (Sunrise/Sunset) Time References
115 -* Event Verification by Date in real-time with month calendar view and event description
116 -* Require a scene to be active before recalling the scheduled scene (optional)
117 -* Advanced Scheduling Feature (Licensed)
118 -** Event Include and/or Exclude by Calendar(s) and/or Calendar Group(s)
119 -** Calendar Groups consist of one or more Calendars
120 -** Calendars can be based on a Date Range or Date Pattern
121 -** Calendar Properties:
122 -*** Date Range:
123 -**** Start and End Dates
124 -**** Specific Dates selected using Date Picker
125 -**** Recur Annually Option
126 -*** Date Pattern:
127 -**** Year - Restrict to specific year or none
128 -**** Month - Restrict to specific Month(s) or none
129 -**** Week - Restrict to specific Week of the month or none
130 -**** Week Day - Restrict to specific day of the week or none
131 -**** Day - Restrict to a specific day of the month or none
132 -**** Optional: Offset - Offset date based on restrictions
133 -**** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
134 -*** Enable/Disable
135 -** Pre-loaded with US Federal and common non-Federal US Holidays
136 -
137 -=== Supported Hardware Features ===
138 -
139 -* Common Settings to all devices
140 -** Contractor Label
141 -** Name
142 -** GlobalId
143 -** UniqueId (GUID)
19 +** Crestron GLS-LCCT sensor integration for daylight tracking (pending)
20 +* Sophisticated Scheduling Engine
21 +** Configurable Actions by Area
22 +*** Scene
23 +**** Override Scene Fade Time
24 +*** Change Keypad State (Enable/Disable/Disable Off)
25 +*** Change Occupancy Mode (Occupancy/Vacancy/Disable/Last)
26 +*** Switch between Normal and After Hours (for Timeout)
27 +*** Change CCT Mode (Auto/Manual)
28 +*** Assign Manual CCT
29 +*** Extend Occupancy Timeout
30 +*** Change Scenes Recalled by Occupied/Vacant/On/Off
31 +*** Shade Command (Open/Close)
32 +*** Plug Load Mode (Off/On/Auto)
33 +** Copy Actions from Area to Area
34 +** AM, PM, and Astronomical (Sunrise/Sunset) Time References
35 +** Event Verification by Date in real-time with month calendar view and event description
36 +** Advanced Scheduling Feature (Licensed)
37 +*** Event Include and/or Exclude by Calendar(s) and/or Calendar Group(s)
38 +*** Calendar Groups consist of one or more Calendars
39 +*** Calendars can be based on a Date Range or Date Pattern
40 +*** Calendar Properties:
41 +**** Date Range:
42 +***** Start and End Dates or Specific Dates selected using Date Picker
43 +***** Does this Recur Annually
44 +**** Date Pattern:
45 +***** Year - Restrict to specific year or none
46 +***** Month - Restrict to specific Month(s) or none
47 +***** Week - Restrict to specific Week of the month or none
48 +***** Week Day - Restrict to specific day of the week or none
49 +***** Day - Restrict to a specific day of the month or none
50 +***** Optional: Offset - Offset date based on restrictions
51 +***** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
52 +**** Enable/Disable
53 +*** Pre-loaded with US Federal and common non-Federal US Holidays
144 144  * Keypads
145 -** Support for common fixed configurations, user assignable at runtime
146 -** Custom keypads with configurable actions per button at runtime
147 -*** Graphic based programming using showrunner™ HUB UI
148 -*** Master raise/lower button support allows assignment of currently selected load/shade/area/etc
149 -*** Custom button layouts w/ labels to assist with generating engravings
150 -** Flexible Templating Engine
151 -*** Create common keypad templates
152 -*** Apply keypad templates to individual keypads
153 -**** Remap hardware when template is applied
154 -**** Optionally exclude specific hardware and/or buttons
55 +** Support for common fixed configurations, user assignable
56 +** Custom keypads with configurable actions per button
155 155  ** User configurable area to control
156 -** Enable/Disable/Disable Off states
157 -** Prevent disable option
158 -** Flip raise/lower on common keypad types
159 -** Configurable hold time support, done in software if not supported by hardware
160 -** Configurable double tap time support if supported by hardware
161 -** Simulate keypads from showrunner™ HUB UI or console
162 -** Direct load mapping for some common keypads
163 -* Keyswitch and Contact Closure Inputs
164 -** Supports all versiport and digital inputs
165 -** Maintained and Momentary supported
166 -** Feedback output supported
167 -** Functions
168 -*** Override
169 -*** Scene Recall for Active and Inactive States
170 -*** Demand Response
171 -*** Actions for Active and Inactive States
172 172  * Occupancy Sensors:
173 -** Occupancy configuration for CN and ZUMLINK occupancy sensors
59 +** Occupancy configuration for CN type occupancy sensors
174 174  ** ​3rd Party and Non-System occupancy sensor support
175 -** Occupancy/Vacancy/Disabled/Use Hardware Logic modes, user configurable
61 +** Occupancy/Vacancy/Disabled modes, user configurable
176 176  ** Configure scenes recalled by area for occupancy and vacancy states
177 177  ** Individual max unoccupied level by load for IECC 2018 C405.2.1.3 compliance
178 178  ** User configurable assignment of sensor to area(s) and load(s)
179 179  ** Occupancy sensors may feed data to multiple areas and loads
180 -** Last occupied and vacant times recorded
181 181  * Partition sensors
182 182  ** Support for divisible areas
183 183  ** GLS-PART-CN with adjustable sensitivity
184 -** 3rd party sensor support via hardware inputs
185 -** User configurable Auto, Combined, and Divided
186 -** Filtering to ignore noisy partition sensors
187 -** Change count and last change recorded
188 -
189 -==== Energy Efficiency ====
190 -
69 +** 3rd party sensor support via versiport input
70 +** User configurable Auto, Combined, and Divided modes to override occ sensor, activated by UI or keypad
71 +* Maintained and Momentary Keyswitch/FACP/Override Input for scene recall or override activation
191 191  * Demand Response/Load Shedding
192 192  ** Automatic via sensor input
193 193  ** Manually via keypad
194 -* Calculated or Measured Power (Watts)
195 -* Energy Efficiency visualization on floorplan
196 -
197 -==== Security ====
198 -
199 -* Touchscreens: Global User and Technician Passcodes, user configurable.
200 -* showrunner™ HUB
201 -** Role Based permissions by Group
202 -** Granular Create, Edit, View, Delete, and Execute permissions by Role
203 -** Users and API Users assignable to groups
204 -** Restrict Group by area and tag
205 -** HTTPS enforced
206 -** Auto session timeout
207 -** Login via username/password or PIN code
208 -** Support for Processor or internal user database
209 -** Best practices for password handling
210 -* API Users using AWSv4 scheme for authentication per request for maximum security
211 -
212 -==== System Settings ====
213 -
75 +* Configurable maximum demand response level by load
76 +* Dynamic addition/deletion/assignment/configuration of loads
77 +* Dynamic addition/deletion of areas
78 +* User editable labeling of areas, loads, keypads, occupancy sensors, and schedules
79 +* Daylight Harvesting sensor to load assignment and settings adjustment
80 +* Global User and Technician Passcodes, user configurable.
214 214  * User configurable time zone, location, and current time
82 +* Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
215 215  * Addressing and Verification of Cresnet devices by serial number
216 216  * Cresnet Device Serial Number capture
217 217  * Configurable Global Actions with touchpanel trigger
86 +* User configurable Crestron EISC Integration with ability to change IP Address and IP-ID of remote Crestron system as well as Areas shared on the fly.  RSD file is automatically generated and link is provided for downloading of RSD file.
218 218  * Remote hardware support from neighbor ShowRunner System:
219 219  ** ​Allows a master ShowRunner system to integrate slave processors
220 220  ** AV Serial Interface
... ... @@ -232,14 +232,8 @@
232 232  * AV Integration protocol via serial port
233 233  * BACNET Support for integration of Areas, Loads (Licensed Feature)
234 234  * Crestron Fusion (Licensed Feature)
235 -* E-DMX Receiver
236 -** SACN or Art-Net
237 -** Enable/Disable control for loads
238 -** Map DMX to showrunner loads
239 -* EISC Export for AV Integration, dynamic creation from the UI (3-series, classic, EISC Client, EISC Server, VC-4 Client)
240 -* HTTP REST API w/ Authorization
241 -* Lightweight API provides real-time control/feedback of hardware using CoAP
242 -* Zum Floor Hub Support for integration, Export showrunner™ areas to the Floor Hub (Licensed Feature)
104 +* EISC Export for AV Integration, dynamic creation from the UI (3-series or classic)
105 +* Zum Floor Hub Support for integration, Export SHOWRUNNER™ areas to the Floor Hub (Licensed Feature)
243 243  
244 244  === Reporting ===
245 245