Skip to Content

Changes for page Features

Last modified by Scott Kohlmann on 2023/04/21 15:15
From version 3.1
edited by Mark Kohlmann
on 2020/04/09 18:43
Change comment: There is no comment for this version
To version 4.2
edited by Mark Kohlmann
on 2022/10/14 18:39
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.MarkKohlmann
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Content
... ... @@ -1,10 +1,11 @@
1 -SHOWRUNNER™ has a large number of features focused on the needs of the commercial lighting market.
1 +SHOWRUNNER™ has a large number of features focused on the needs of the commercial lighting and hospitality markets and is adaptable to the residential market.
2 2  
3 -=== Features ===
3 +==== Area Features ====
4 4  
5 -* Lighting Controls grouped into Areas
6 -* Scene recall and master raise/lower by area
7 -* User configurable scene name, fade time, and load include by area
5 +* Lighting Loads
6 +* Scene recall
7 +* Master raise/lower
8 +* User configurable scene name, fade time, and load include by scene
8 8  * Individual load control within an area
9 9  * Select area from touchpanel, areas can be restricted by panel
10 10  * RGB controls for applicable fixtures, saved per scene
... ... @@ -13,78 +13,207 @@
13 13  ** CCT Control per area for applicable fixtures
14 14  ** Global schedule for CCT, astronomical and/or fixed schedules
15 15  ** Manual CCT override per area
17 +** Crestron GLS-LCCT (SolarSync™) sensor integration for daylight tracking
18 +* Demand Response with ability to exclude area from Demand Response event
19 +* Configurable load grouping allows aggregation of loads to a single slider per group, can include linked areas
20 +* HVAC Control
21 +* Shades
22 +* Occupancy Features
23 +** Occupancy Modes
24 +*** Occupancy
25 +*** Vacancy
26 +*** Disabled
27 +*** Use Hardware Logic (if supported by edge controller)
28 +** Extend occupancy timeout by user specified seconds, can be scheduled
29 +** Configurable occupied and vacant scenes, scheduled
30 +** Configurable grace occupancy support without needing support in hardware
31 +* After Hours support for automatic shutoff after configurable timeout w/ alerting
32 +* Parent Area feature allows one area to trickle down scene recall and raise/lower (if enabled)
33 +* Last Scene Recall timestamp and triggering action recorded
34 +
35 +==== Load Features ====
36 +
37 +* Dynamically assigned/unassigned at runtime to areas
38 +* Supported load types
39 +** Single Channel
40 +** Dynamic White/CCT
41 +*** Warm/Cool
42 +*** Intensity/CCT
43 +*** DALI Type 8
44 +*** Pharos Dynamic White
45 +** RGB/W/A
46 +*** Color Picker
47 +*** W/A channels can be controlled individually or mixed (Pharos)
48 +* Supported load behaviors
49 +** Dimmable
50 +** Switched
51 +** Plug Load
52 +* Dimming Curves
53 +** Unaffected
54 +** Linear
55 +** Linear No Zero Pass (support for EM lights that are not allowed to turn off i.e. Chicago 10%)
56 +** Logarithmic
57 +** Non Dim
58 +** S Curve
59 +** Soft Linear
60 +** Square
61 +** Always On
62 +** Inverse Log
63 +** Custom based on input output ranges
64 +* Min/Mix Trim, performed in hardware if supported
65 +* Override Level, performed in hardware if supported
66 +* Unoccupied Level
67 +* Demand Response Level
68 +* Enable/Disable/Override states
69 +* Option to ignore long fade times if the loads is off
70 +* Option recall last level
71 +* Individual daylight harvesting settings, enabled/disabled by scene
72 +** Open/closed loop
73 +** Min/Max levels
74 +** Sensitivity
75 +** Fade time
76 +* Loads may track other loads
77 +* Remap channels for unusual fixture channel mappings
78 +* Raise/lower, performed with software fade engine if not supported by hardware
79 +* Dynamic White/Circadian Rhythm CCT
16 16  ** Custom CCT curves per load or default algorithm
17 17  ** Min/Max CCT per load
18 18  ** Support for Warm/Cool or Intensity/CCT fixture types
19 19  ** Configurable automatic fixture shut off if outside CCT range
20 -** Crestron GLS-LCCT sensor integration for daylight tracking
21 -* Sophisticated Scheduling Engine
22 -** Configurable Actions by Area
23 -*** Scene
24 -**** Override Scene Fade Time
25 -*** Change Keypad State (Enable/Disable/Disable Off)
26 -*** Change Occupancy Mode (Occupancy/Vacancy/Disable/Last)
27 -*** Switch between Normal and After Hours (for Timeout)
28 -*** Change CCT Mode (Auto/Manual)
29 -*** Assign Manual CCT
30 -*** Extend Occupancy Timeout
31 -*** Change Scenes Recalled by Occupied/Vacant/On/Off
32 -*** Shade Command (Open/Close)
33 -*** Plug Load Mode (Off/On/Auto)
34 -** Copy Actions from Area to Area
35 -** AM, PM, and Astronomical (Sunrise/Sunset) Time References
36 -** Event Verification by Date in real-time with month calendar view and event description
37 -** Advanced Scheduling Feature (Licensed)
38 -*** Event Include and/or Exclude by Calendar(s) and/or Calendar Group(s)
39 -*** Calendar Groups consist of one or more Calendars
40 -*** Calendars can be based on a Date Range or Date Pattern
41 -*** Calendar Properties:
42 -**** Date Range:
43 -***** Start and End Dates or Specific Dates selected using Date Picker
44 -***** Does this Recur Annually
45 -**** Date Pattern:
46 -***** Year - Restrict to specific year or none
47 -***** Month - Restrict to specific Month(s) or none
48 -***** Week - Restrict to specific Week of the month or none
49 -***** Week Day - Restrict to specific day of the week or none
50 -***** Day - Restrict to a specific day of the month or none
51 -***** Optional: Offset - Offset date based on restrictions
52 -***** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
53 -**** Enable/Disable
54 -*** Pre-loaded with US Federal and common non-Federal US Holidays
84 +** Crestron GLS-LCCT (SolarSync™) sensor integration for daylight tracking
85 +* Load flashing for identification
86 +* Verified timestamp option
87 +* DALI (DIN-DALI-2/ZUMNET-JBOX-DALI Legacy mode)
88 +** Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
89 +
90 +(% class="wikigeneratedid" %)
91 +==== Scheduling Features ====
92 +
93 +* Algorithm based scheduling engine ensures predictable operation year after year with no need to specifically specify each day
94 +* Area and/or Tag based schedules
95 +* Individual global events or grouped events
96 +* showrunner™ HUB UI Features
97 +** Day/Week/Month/Time Grid views display all events calculated by the scheduler engine
98 +** Tree based event/event groups
99 +** View Built-In Calendars and Groups
100 +** Create/Edit/Delete Custom Calendars and Groups
101 +* Execute last event on startup (configurable) to bring system in to correct state
102 +* Configurable Actions
103 +** Scene w/ option to override fade time
104 +** Change Keypad State (Enable/Disable/Disable Off)
105 +** Change Occupancy Mode (Occupancy/Vacancy/Disable/Last/Use Hardware)
106 +** Switch between Normal and After Hours (for Timeout)
107 +** Change CCT Mode (Auto/Manual)
108 +** Assign Manual CCT
109 +** Extend Occupancy Timeout setting
110 +** Change Scenes Recalled by Occupied/Vacant/On/Off
111 +** Shade Command (Open/Close)
112 +** Plug Load Mode (Off/On/Auto)
113 +* Copy Actions from Area to Area
114 +* AM, PM, and Relative to Astronomical (Sunrise/Sunset) Time References
115 +* Event Verification by Date in real-time with month calendar view and event description
116 +* Require a scene to be active before recalling the scheduled scene (optional)
117 +* Advanced Scheduling Feature (Licensed)
118 +** Event Include and/or Exclude by Calendar(s) and/or Calendar Group(s)
119 +** Calendar Groups consist of one or more Calendars
120 +** Calendars can be based on a Date Range or Date Pattern
121 +** Calendar Properties:
122 +*** Date Range:
123 +**** Start and End Dates
124 +**** Specific Dates selected using Date Picker
125 +**** Recur Annually Option
126 +*** Date Pattern:
127 +**** Year - Restrict to specific year or none
128 +**** Month - Restrict to specific Month(s) or none
129 +**** Week - Restrict to specific Week of the month or none
130 +**** Week Day - Restrict to specific day of the week or none
131 +**** Day - Restrict to a specific day of the month or none
132 +**** Optional: Offset - Offset date based on restrictions
133 +**** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
134 +*** Enable/Disable
135 +** Pre-loaded with US Federal and common non-Federal US Holidays
136 +
137 +=== Supported Hardware Features ===
138 +
139 +* Common Settings to all devices
140 +** Contractor Label
141 +** Name
142 +** GlobalId
143 +** UniqueId (GUID)
55 55  * Keypads
56 -** Support for common fixed configurations, user assignable
57 -** Custom keypads with configurable actions per button
145 +** Support for common fixed configurations, user assignable at runtime
146 +** Custom keypads with configurable actions per button at runtime
147 +*** Graphic based programming using showrunner™ HUB UI
148 +*** Master raise/lower button support allows assignment of currently selected load/shade/area/etc
149 +*** Custom button layouts w/ labels to assist with generating engravings
150 +** Flexible Templating Engine
151 +*** Create common keypad templates
152 +*** Apply keypad templates to individual keypads
153 +**** Remap hardware when template is applied
154 +**** Optionally exclude specific hardware and/or buttons
58 58  ** User configurable area to control
156 +** Enable/Disable/Disable Off states
157 +** Prevent disable option
158 +** Flip raise/lower on common keypad types
159 +** Configurable hold time support, done in software if not supported by hardware
160 +** Configurable double tap time support if supported by hardware
161 +** Simulate keypads from showrunner™ HUB UI or console
162 +** Direct load mapping for some common keypads
163 +* Keyswitch and Contact Closure Inputs
164 +** Supports all versiport and digital inputs
165 +** Maintained and Momentary supported
166 +** Feedback output supported
167 +** Functions
168 +*** Override
169 +*** Scene Recall for Active and Inactive States
170 +*** Demand Response
171 +*** Actions for Active and Inactive States
59 59  * Occupancy Sensors:
60 -** Occupancy configuration for CN type occupancy sensors
173 +** Occupancy configuration for CN and ZUMLINK occupancy sensors
61 61  ** ​3rd Party and Non-System occupancy sensor support
62 -** Occupancy/Vacancy/Disabled modes, user configurable
175 +** Occupancy/Vacancy/Disabled/Use Hardware Logic modes, user configurable
63 63  ** Configure scenes recalled by area for occupancy and vacancy states
64 64  ** Individual max unoccupied level by load for IECC 2018 C405.2.1.3 compliance
65 65  ** User configurable assignment of sensor to area(s) and load(s)
66 66  ** Occupancy sensors may feed data to multiple areas and loads
180 +** Last occupied and vacant times recorded
67 67  * Partition sensors
68 68  ** Support for divisible areas
69 69  ** GLS-PART-CN with adjustable sensitivity
70 -** 3rd party sensor support via versiport input
71 -** User configurable Auto, Combined, and Divided modes to override occ sensor, activated by UI or keypad
72 -* Maintained and Momentary Keyswitch/FACP/Override Input for scene recall or override activation
184 +** 3rd party sensor support via hardware inputs
185 +** User configurable Auto, Combined, and Divided
186 +** Filtering to ignore noisy partition sensors
187 +** Change count and last change recorded
188 +
189 +==== Energy Efficiency ====
190 +
73 73  * Demand Response/Load Shedding
74 74  ** Automatic via sensor input
75 75  ** Manually via keypad
76 -* Configurable maximum demand response level by load
77 -* Dynamic addition/deletion/assignment/configuration of loads
78 -* Dynamic addition/deletion of areas
79 -* User editable labeling of areas, loads, keypads, occupancy sensors, and schedules
80 -* Daylight Harvesting sensor to load assignment and settings adjustment
81 -* Global User and Technician Passcodes, user configurable.
194 +* Calculated or Measured Power (Watts)
195 +* Energy Efficiency visualization on floorplan
196 +
197 +==== Security ====
198 +
199 +* Touchscreens: Global User and Technician Passcodes, user configurable.
200 +* showrunner™ HUB
201 +** Role Based permissions by Group
202 +** Granular Create, Edit, View, Delete, and Execute permissions by Role
203 +** Users and API Users assignable to groups
204 +** Restrict Group by area and tag
205 +** HTTPS enforced
206 +** Auto session timeout
207 +** Login via username/password or PIN code
208 +** Support for Processor or internal user database
209 +** Best practices for password handling
210 +* API Users using AWSv4 scheme for authentication per request for maximum security
211 +
212 +==== System Settings ====
213 +
82 82  * User configurable time zone, location, and current time
83 -* Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
84 84  * Addressing and Verification of Cresnet devices by serial number
85 85  * Cresnet Device Serial Number capture
86 86  * Configurable Global Actions with touchpanel trigger
87 -* User configurable Crestron EISC Integration with ability to change IP Address and IP-ID of remote Crestron system as well as Areas shared on the fly.  RSD file is automatically generated and link is provided for downloading of RSD file.
88 88  * Remote hardware support from neighbor ShowRunner System:
89 89  ** ​Allows a master ShowRunner system to integrate slave processors
90 90  ** AV Serial Interface
... ... @@ -102,8 +102,14 @@
102 102  * AV Integration protocol via serial port
103 103  * BACNET Support for integration of Areas, Loads (Licensed Feature)
104 104  * Crestron Fusion (Licensed Feature)
105 -* EISC Export for AV Integration, dynamic creation from the UI (3-series or classic)
106 -* Zum Floor Hub Support for integration, Export SHOWRUNNER™ areas to the Floor Hub (Licensed Feature)
235 +* E-DMX Receiver
236 +** SACN or Art-Net
237 +** Enable/Disable control for loads
238 +** Map DMX to showrunner loads
239 +* EISC Export for AV Integration, dynamic creation from the UI (3-series, classic, EISC Client, EISC Server, VC-4 Client)
240 +* HTTP REST API w/ Authorization
241 +* Lightweight API provides real-time control/feedback of hardware using CoAP
242 +* Zum Floor Hub Support for integration, Export showrunner™ areas to the Floor Hub (Licensed Feature)
107 107  
108 108  === Reporting ===
109 109