Changes for page Features

Last modified by Scott Kohlmann on 2023/04/21 15:15

From version 2.2
edited by Mark Kohlmann
on 2020/04/06 22:15
Change comment: Update document after refactoring.
To version 7.1
edited by Mark Kohlmann
on 2022/10/17 19:19
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ Features
1 +Features
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.MarkKohlmann
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Content
... ... @@ -1,10 +1,29 @@
1 -SHOWRUNNER™ has a large number of features focused on the needs of the commercial lighting market.
1 +showrunneris a commercial lighting control and lighting management system.  showrunner™ contains a large number of features focused on the needs of the commercial lighting and hospitality markets and is adaptable to the residential market.  Hardware support is extensive and growing all the time.  This document is not a complete feature list and Chief Integrations reserves the right to make modifications at any time.
2 2  
3 -=== Features ===
3 +{{box cssClass="floatinginfobox"}}
4 +(% class="wikigeneratedid wikigeneratedheader" id="HTableofContents" %)
5 +**CONTENTS**
4 4  
5 -* Lighting Controls grouped into Areas
6 -* Scene recall and master raise/lower by area
7 -* User configurable scene name, fade time, and load include by area
7 +{{toc start="4"/}}
8 +{{/box}}
9 +
10 +==== Key Capabilities ====
11 +
12 +* Configuration driven with runtime configuration support enables rapid commissioning of commercial lighting systems
13 +* Extensive feature set allows Crestron systems to comply with the majority of DIV 26s and customer requirements
14 +* Large native hardware support with the option to extend support to new hardware quickly and easily
15 +* Touchpanel and web based UIs cover users needs
16 +* Runs entirely on a Crestron processor or VC-4 eliminating the need to manage expensive servers
17 +* Floorplans with pinch, zoom, and insight!
18 +* Powerful scheduling capabilities enable set and forget scheduling of lighting and easy management to handle changes
19 +
20 +==== Area Features ====
21 +
22 +* Lighting Loads
23 +* Scene recall
24 +* Master raise/lower
25 +* User configurable scene name, fade time, and load include by scene
26 +* Individual scenes may be locked to prevent changing their settings
8 8  * Individual load control within an area
9 9  * Select area from touchpanel, areas can be restricted by panel
10 10  * RGB controls for applicable fixtures, saved per scene
... ... @@ -13,80 +13,451 @@
13 13  ** CCT Control per area for applicable fixtures
14 14  ** Global schedule for CCT, astronomical and/or fixed schedules
15 15  ** Manual CCT override per area
35 +* Demand Response with ability to exclude area from Demand Response event
36 +* Configurable load grouping allows aggregation of loads to a single slider per group, can include linked areas
37 +* HVAC Control
38 +* Shades
39 +* Occupancy Features
40 +** Occupancy Modes
41 +*** Occupancy
42 +*** Vacancy
43 +*** Disabled
44 +*** Use Hardware Logic (if supported by edge controller)
45 +** Extend occupancy timeout by user specified seconds, can be scheduled
46 +** Configurable occupied and vacant scenes, scheduled
47 +** Configurable grace occupancy support without needing support in hardware
48 +* After Hours support for automatic shutoff after configurable timeout w/ alerting
49 +* Parent Area feature allows one area to trickle down scene recall and raise/lower (if enabled)
50 +* Last Scene Recall timestamp and triggering action recorded
51 +* Organized in a node tree with multiple depths
52 +
53 +==== Load Features ====
54 +
55 +* Dynamically assigned/unassigned at runtime to areas
56 +* Supported load types
57 +** Single Channel
58 +** Dynamic White/CCT
59 +*** Warm/Cool
60 +*** Intensity/CCT
61 +*** DALI Type 8
62 +*** Pharos Dynamic White
63 +** RGB/W/A
64 +*** Color Picker
65 +*** W/A channels can be controlled individually or mixed (Pharos)
66 +* Supported load behaviors
67 +** Dimmable
68 +** Switched
69 +** Plug Load
70 +* Dimming Curves
71 +** Unaffected
72 +** Linear
73 +** Linear No Zero Pass (support for EM lights that are not allowed to turn off i.e. Chicago 10%)
74 +** Logarithmic
75 +** Non Dim
76 +** S Curve
77 +** Soft Linear
78 +** Square
79 +** Always On
80 +** Inverse Log
81 +** Custom based on input output ranges
82 +* Min/Mix Trim, performed in hardware if supported
83 +* Override Level, performed in hardware if supported
84 +* Unoccupied Level
85 +* Demand Response Level
86 +* Enable/Disable/Override states
87 +* Option to ignore long fade times if the loads is off
88 +* Option recall last on level
89 +* Individual daylight harvesting settings, enabled/disabled by scene
90 +** Open/closed loop
91 +** Min/Max levels
92 +** Sensitivity
93 +** Fade time
94 +* Loads may track other loads
95 +* Remap channels for unusual fixture channel mappings
96 +* Raise/lower, performed with software fade engine if not supported by hardware
97 +* Dynamic White/Circadian Rhythm CCT
16 16  ** Custom CCT curves per load or default algorithm
17 17  ** Min/Max CCT per load
18 18  ** Support for Warm/Cool or Intensity/CCT fixture types
19 19  ** Configurable automatic fixture shut off if outside CCT range
20 -** Crestron GLS-LCCT sensor integration for daylight tracking
21 -* Sophisticated Scheduling Engine
22 -** Configurable Actions by Area
23 -*** Scene
24 -**** Override Scene Fade Time
25 -*** Change Keypad State (Enable/Disable/Disable Off)
26 -*** Change Occupancy Mode (Occupancy/Vacancy/Disable/Last)
27 -*** Switch between Normal and After Hours (for Timeout)
28 -*** Change CCT Mode (Auto/Manual)
29 -*** Assign Manual CCT
30 -*** Extend Occupancy Timeout
31 -*** Change Scenes Recalled by Occupied/Vacant/On/Off
32 -*** Shade Command (Open/Close)
33 -*** Plug Load Mode (Off/On/Auto)
34 -** Copy Actions from Area to Area
35 -** AM, PM, and Astronomical (Sunrise/Sunset) Time References
36 -** Event Verification by Date in real-time with month calendar view and event description
37 -** Advanced Scheduling Feature (Licensed)
38 -*** Event Include and/or Exclude by Calendar(s) and/or Calendar Group(s)
39 -*** Calendar Groups consist of one or more Calendars
40 -*** Calendars can be based on a Date Range or Date Pattern
41 -*** Calendar Properties:
42 -**** Date Range:
43 -***** Start and End Dates or Specific Dates selected using Date Picker
44 -***** Does this Recur Annually
45 -**** Date Pattern:
46 -***** Year - Restrict to specific year or none
47 -***** Month - Restrict to specific Month(s) or none
48 -***** Week - Restrict to specific Week of the month or none
49 -***** Week Day - Restrict to specific day of the week or none
50 -***** Day - Restrict to a specific day of the month or none
51 -***** Optional: Offset - Offset date based on restrictions
52 -***** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
53 -**** Enable/Disable
54 -*** Pre-loaded with US Federal and common non-Federal US Holidays
102 +** Crestron GLS-LCCT (SolarSync™) sensor integration for daylight tracking
103 +* Load flashing for identification
104 +* Verified timestamp option
105 +* DALI (DIN-DALI-2/ZUMNET-JBOX-DALI Legacy mode)
106 +** Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
107 +
108 +==== Scheduling Features ====
109 +
110 +* Algorithm based scheduling engine ensures predictable operation year after year with no need to specifically specify each day
111 +* Area and/or Tag based schedules
112 +* Individual global events or grouped events
113 +* showrunner™ HUB UI Features
114 +** Day/Week/Month/Time Grid views display all events calculated by the scheduler engine
115 +** Tree based event/event groups
116 +** View Built-In Calendars and Groups
117 +** Create/Edit/Delete Custom Calendars and Groups
118 +* Execute last event on startup (configurable) to bring system in to correct state
119 +* Configurable Actions
120 +** Scene w/ option to override fade time
121 +** Change Keypad State (Enable/Disable/Disable Off)
122 +** Change Occupancy Mode (Occupancy/Vacancy/Disable/Last/Use Hardware)
123 +** Switch between Normal and After Hours (for Timeout)
124 +** Change CCT Mode (Auto/Manual)
125 +** Assign Manual CCT
126 +** Extend Occupancy Timeout setting
127 +** Change Scenes Recalled by Occupied/Vacant/On/Off
128 +** Shade Command (Open/Close)
129 +** Plug Load Mode (Off/On/Auto)
130 +* Copy Actions from Area to Area
131 +* AM, PM, and Relative to Astronomical (Sunrise/Sunset) Time References
132 +* Event Verification by Date in real-time with month calendar view and event description
133 +* Require a scene to be active before recalling the scheduled scene (optional)
134 +* Advanced Scheduling Feature (Licensed)
135 +** Event Include and/or Exclude by Calendar(s) and/or Calendar Group(s)
136 +** Calendar Groups consist of one or more Calendars
137 +** Calendars can be based on a Date Range or Date Pattern
138 +** Calendar Properties:
139 +*** Date Range:
140 +**** Start and End Dates
141 +**** Specific Dates selected using Date Picker
142 +**** Recur Annually Option
143 +*** Date Pattern:
144 +**** Year - Restrict to specific year or none
145 +**** Month - Restrict to specific Month(s) or none
146 +**** Week - Restrict to specific Week of the month or none
147 +**** Week Day - Restrict to specific day of the week or none
148 +**** Day - Restrict to a specific day of the month or none
149 +**** Optional: Offset - Offset date based on restrictions
150 +**** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
151 +*** Enable/Disable
152 +** Pre-loaded with US Federal and common non-Federal US Holidays
153 +** Support for additional algorithms available upon request
154 +
155 +==== Circadian Rhythm/Dynamic White ====
156 +
157 +* Global system CCT Level
158 +* Override CCT per area by scene or manually
159 +* Crestron GLS-LCCT (SolarSync™) sensor integration for daylight tracking
160 +* Time period based
161 +** Time References for start and end of period
162 +*** AM/PM
163 +*** Relative to
164 +**** Sunrise
165 +**** Sunset
166 +**** Solar Noon
167 +** Each time period can have the following setting for CCT
168 +*** Static
169 +*** Linear change over time
170 +*** Sensor with configured CCT when sensor is out of range
171 +* Supported with 0-10V, DMX, and DALI. Additional support via APIs
172 +
173 +==== Supported Hardware Features ====
174 +
175 +Virtually the entire Crestron lighting product line is supported along with several 3rd party products
176 +
177 +* Common Settings to all devices
178 +** Contractor Label
179 +** Name
180 +** GlobalId
181 +** UniqueId (GUID)
182 +* HVAC
183 +** Temperature control by area
184 +** Support for some Crestron Thermostats, more can be added as needed
185 +** Support for some 3rd party systems, more can be added as needed
55 55  * Keypads
56 -** Support for common fixed configurations, user assignable
57 -** Custom keypads with configurable actions per button
187 +** Support for common fixed configurations, user assignable at runtime. Includes all standard Crestron SpecsBuilder types.
188 +** Custom keypads with configurable actions per button at runtime
189 +*** Graphic based programming using showrunner™ HUB UI
190 +*** Master raise/lower button support allows assignment of currently selected load/shade/area/etc
191 +*** Custom button layouts w/ labels to assist with generating engravings
192 +** Flexible Templating Engine
193 +*** Create common keypad templates
194 +*** Apply keypad templates to individual keypads
195 +**** Remap hardware when template is applied
196 +**** Optionally exclude specific hardware and/or buttons
58 58  ** User configurable area to control
198 +** Enable/Disable/Disable Off states
199 +** Prevent disable option
200 +** Flip raise/lower on common keypad types
201 +** Configurable hold time support, done in software if not supported by hardware
202 +** Configurable double tap time support if supported by hardware
203 +** Simulate keypads from showrunner™ HUB UI or console
204 +** Direct load mapping for some common keypads
205 +* Keyswitch/Contact Closure Inputs
206 +** Supports all versiport and digital inputs
207 +** Maintained and Momentary supported
208 +** Feedback output supported
209 +** Functions
210 +*** Override
211 +*** Scene Recall for Active and Inactive States
212 +*** Demand Response
213 +*** Actions for Active and Inactive States
214 +** Commonly used for FACP, override, demand response, and panic inputs
59 59  * Occupancy Sensors:
60 -** Occupancy configuration for CN type occupancy sensors
216 +** Occupancy configuration for CN and ZUMLINK occupancy sensors
61 61  ** ​3rd Party and Non-System occupancy sensor support
62 -** Occupancy/Vacancy/Disabled modes, user configurable
218 +** Occupancy/Vacancy/Disabled/Use Hardware Logic modes, user configurable
63 63  ** Configure scenes recalled by area for occupancy and vacancy states
64 -** Individual max unoccupied level by load for IECC 2018 C405.2.1.3 compliance
220 +** Individual max unoccupied level by load for IECC 2018 C405.2.1.3 compliance (open office 600sqft)
65 65  ** User configurable assignment of sensor to area(s) and load(s)
66 66  ** Occupancy sensors may feed data to multiple areas and loads
223 +** Last occupied and vacant times recorded
224 +* Output Signal
225 +** Logic object capable of triggering additional logic
226 +** Can trigger physical outputs via versiports/IOs
227 +** Supports conditional logic
228 +** Independent actions for active/inactive states
229 +** Configurable delays for active/inactive execution
67 67  * Partition sensors
68 68  ** Support for divisible areas
69 69  ** GLS-PART-CN with adjustable sensitivity
70 -** 3rd party sensor support via versiport input
71 -** User configurable Auto, Combined, and Divided modes to override occ sensor, activated by UI or keypad
72 -* Maintained and Momentary Keyswitch/FACP/Override Input for scene recall or override activation
233 +** 3rd party sensor support via hardware inputs
234 +** User configurable Auto (use sensor) with manual override for Combined and Divided
235 +** Filtering to ignore noisy partition sensors
236 +** Change count and last change recorded help troubleshoot
237 +* Photocell
238 +** Supports Open Loop, Closed Loop, Exterior, and LCCT (as SolarSync™ and exterior)
239 +** Configurable coefficient
240 +** Configurable thresholds
241 +** Assignable to individual loads for daylight harvesting
242 +* Serial Interface
243 +** RS-232/422/484 depending on hardware
244 +** Configurable Baud Rate and Com settings
245 +** Simple ASCII API for controlling/monitoring
246 +** Areas/Loads/Occupancy/Partition/Shades supported
247 +* Shades
248 +** Support for Crestron shades/drapes
249 +** Support for many 3rd party shade and drape systems
250 +* Zum Wired
251 +** Edge logic operation in Zum App mode
252 +*** Override occupancy logic and use showrunner™ logic
253 +** Central logic in CNET mode
254 +** Cresnet devices attached to ZUMNET-JBOXs in either Edge or Central modes
255 +* Zum Wireless
256 +** Override keypad buttons (except buttons 5-6)
257 +** Edge logic operation
258 +** Override occupancy behavior with showrunner™ logic
259 +** Direct load control
260 +** Scene save
261 +* Support for configuring hardware symbol properties on Crestron hardware
262 +
263 +==== Energy Efficiency ====
264 +
73 73  * Demand Response/Load Shedding
74 74  ** Automatic via sensor input
75 -** Manually via keypad
76 -* Configurable maximum demand response level by load
77 -* Dynamic addition/deletion/assignment/configuration of loads
78 -* Dynamic addition/deletion of areas
79 -* User editable labeling of areas, loads, keypads, occupancy sensors, and schedules
80 -* Daylight Harvesting sensor to load assignment and settings adjustment
81 -* Global User and Technician Passcodes, user configurable.
267 +** Manually via user input
268 +* Calculated or Measured Power (Watts)
269 +* Energy Efficiency visualization on floorplan
270 +
271 +==== Security ====
272 +
273 +* Touchscreens: Global User and Technician Passcodes, user configurable.
274 +* showrunner™ HUB
275 +** Role Based permissions by Group
276 +** Granular Create, Edit, View, Delete, and Execute permissions by Role
277 +** Users and API Users assignable to groups
278 +** Restrict Group by area and tag
279 +** HTTPS enforced
280 +** Auto session timeout
281 +** Login via username/password or PIN code
282 +** Support for Processor and internal user database with configurable priority or specify one exclusively
283 +** Best practices for password handling
284 +* API using AWSv4 scheme for authentication per request for maximum security
285 +* Encrypted storage of all credentials and keys
286 +
287 +==== General Features ====
288 +
82 82  * User configurable time zone, location, and current time
83 -* Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
84 84  * Addressing and Verification of Cresnet devices by serial number
85 85  * Cresnet Device Serial Number capture
86 -* Configurable Global Actions with touchpanel trigger
87 -* User configurable Crestron EISC Integration with ability to change IP Address and IP-ID of remote Crestron system as well as Areas shared on the fly.  RSD file is automatically generated and link is provided for downloading of RSD file.
292 +* Extensive console command interface (CLI)
293 +* Simulate sensor and keypad inputs to test without hardware
294 +* DHCP server on single LAN processors allows setup of isolated networks without additional DHCP server. 
295 +Note: DHCP server is not designed to be used in production and will automatically be disabled on a reboot, use for setup only.
296 +
297 +==== Diagnostics ====
298 +
299 +* Provides diagnostic data when supported by hardware
300 +* Diagnostics available from load controllers all the way up to Cresnet bridges
301 +* Status indications quickly assist with identifying severity of the problem: Normal, Warning, Critical, Status Only
302 +
303 +==== Discovery ====
304 +
305 +* Discover and automatically define Zum Wired hardware
306 +* Discover and automatically define Zum Wireless hardware
307 +* Discover Cresnet devices connected to the system, automatic addressing for configured hardware by serial number
308 +* Discover and claim select Crestron Ethernet devices connected to the local network, automatic IP Table setup when claiming
309 +
310 +==== Event Log ====
311 +
312 +* Central logging mechanism
313 +* Messages time stamped
314 +* CSV format
315 +* Multiple logging levels: Critical, Error, Warning, Information, Debug, Trace
316 +* Filter by logging level
317 +* Filter by source object
318 +* Filter by GlobalId
319 +* Trace option allows tracking the triggering event through execution
320 +* Thread option allows tracking of the thread executing
321 +* Logging to console
322 +* Logging to file
323 +* Logging to remote syslog (via processor)
324 +* Heartbeat option with configurable interval
325 +* Debugging writes to the event log
326 +* Global Enable flag
327 +
328 +==== Extensibility ====
329 +
330 +* Actions
331 +** Logic objects exist on showrunner™ objects
332 +** Functionality can be triggered via APIs
333 +** Used for defining the behaviors of global actions, custom keypads, and numerous other logic operations within showrunner™
334 +* Extensions
335 +** Extension model allows customization and additional functionality to be added to the showrunner™ ecosystem
336 +** [[Supported functions>>doc:SHOWRUNNER™ Integrations Guide.Integration Options.Extensions.WebHome]]
337 +* Global Actions
338 +** Allow manual or input triggered operations against the system
339 +** Can be custom programmed at runtime
340 +
341 +==== User Interfaces ====
342 +
343 +* showrunner™ HUB
344 +** Web based, touch and mouse friendly design
345 +** Runs directly on the processor or VC-4 instance
346 +** HTTPS required
347 +** Can be run in kiosk mode on a touchscreen PC for the full touchscreen experience
348 +** Node Tree
349 +*** Organize areas in logical locations based on physical topology
350 +*** Searchable, only shows matching areas
351 +** Floorplans
352 +*** Assigned to a node, multiple floor plans are supported
353 +*** Pinch zoom/touch pan
354 +*** User provided floorplan
355 +*** Draw directly on floorplan for areas and objects
356 +**** Areas
357 +**** Loads
358 +**** Partitions
359 +**** Occupancy Sensors
360 +**** Keypads
361 +**** Photocells
362 +*** Crestron product line icons area available to match the installed sensor
363 +*** Interactive control screens depending on clicked object
364 +*** Multiple different views help visualize data
365 +**** Area View - Shows areas with user selected colors
366 +**** Tags View - Shows areas based on their assigned tag
367 +**** Occupancy View - Shows areas based on their current occupancy status and how recently that status changed
368 +**** Intensity View - Shows areas shaded based on the current overall light intensity
369 +**** Energy View - Shows areas shaded based on the areas current energy efficiency from efficient to inefficient
370 +*** Automatic navigation to area when selected from the node tree
371 +*** Fullscreen view
372 +** Schedule
373 +*** See [[Scheduling Features>>doc:||anchor="Scheduling Features"]] for more info
374 +** Reports
375 +*** Interactive data
376 +**** Area Loads
377 +**** Area Scenes
378 +**** Areas
379 +**** Cresnet (Query)
380 +**** Device Status
381 +**** Events
382 +**** Keypads
383 +** Setup
384 +*** Device Diagnostic - Show Diagnostic data from supported devices
385 +*** Hardware Management - Tree view of Ethernet, Cresnet, and RF topologies
386 +*** File Management - Manage config, license, currently active config, and backup/restore operations
387 +*** Global Actions - Add/Delete/Configure
388 +*** Integrations - Manage integrations with other showrunner™ systems
389 +*** Keypad Configuration - Configure keypads
390 +*** Maps - Add floorplan images
391 +*** Network - DHCP Server (for processors without routers only)
392 +*** System Settings - Manage various system settings
393 +*** Tags - Manage tags and association of tags with areas
394 +*** User Management - Manage users/groups/API users
395 +* Crestron TS/TSWs and Crestron App (iPad/iPhone/Android)
396 +** Area Control Screen
397 +*** Select Area (Can be disabled or restricted)
398 +*** Divide/Combine status, if divisible
399 +*** Occupancy/vacancy status, if has an occupancy sensor
400 +*** Individual load controls
401 +*** Dynamic white color temperature control, if supported
402 +*** RGB color picker, if load supported
403 +*** Scenes, up to 20, save with press and hold
404 +*** Master Raise/Lower
405 +*** Global Actions, if defined, can be hidden
406 +*** HVAC controls, if supported
407 +*** Shade controls, if supported
408 +*** Passcode protected, if enabled
409 +** Setup Screen
410 +*** Passcode protected, if enabled
411 +*** Area Configuration
412 +**** Area List
413 +**** Area Name, editable
414 +**** Load Configuration - Configure load control type and labeling, test fixture operation
415 +**** Occupancy Setup - Configure area occupancy behavior and occupancy settings
416 +**** Daylight Harvesting - Configure daylight harvesting settings per load/scene
417 +**** Scene Setup - Configure and add/delete scenes
418 +**** Properties - Configure area behavior settings
419 +**** Add/Delete areas
420 +*** Area Layout - Configure partition sensors and area assignments to partition sensors
421 +*** Crestron Integration - Configure EISCs
422 +*** Device Addressing - Address and verify Cresnet devices
423 +*** Keypad Configuration - Configure keypad type, area assignment, and enable status
424 +*** Load Hardware - Configure loads and load controllers
425 +*** Location and System Clock - View/Set system clock, site lat/lon, and timezone
426 +*** Occupancy Assignment - Assign occupancy sensors to loads/areas
427 +*** Scheduler / Events - Add/Edit/Delete events, configure calendars, configure actions (for non-group events)
428 +*** Security Settings - Enable/Disable/Change PIN codes
429 +*** Zum Integration - Configure export to Zum Floor Hub
430 +*** Help Screen - Support contact information, showrunner version list, and license status
431 +** Custom Logo option for splash screen
432 +** Optional floor plan area selection, zoom/pan are NOT supported, static image only
433 +** Optional partition control on floor plan screen
434 +
435 +=== Integrations ===
436 +
437 +* AV Integration protocol via serial port, simple ASCII protocol with feedback
438 +* BACnet Support for integration of Areas, Loads (Licensed Feature, both showrunner and Crestron)
439 +** Global
440 +*** Override
441 +*** Demand Response
442 +*** Device Offline Count
443 +*** Alarm
444 +*** System Normal/After Hours
445 +** Area Specific
446 +*** showrunner™ Mode
447 +**** Occupancy Status
448 +**** Occupancy Enable
449 +**** Scenes
450 +**** Loads
451 +**** Photocell Level
452 +**** Overall Intensity
453 +**** Power (watts)
454 +*** Zum Hub Emulation Mode
455 +**** Online
456 +**** On
457 +**** Scenes
458 +**** Occupied
459 +**** Occupancy Sensor Enable
460 +* Crestron Fusion EM (Licensed Feature)
461 +** Scenes, Recall and Save
462 +** Load Control
463 +** Occupancy Status
464 +** Photocell
465 +* e-DMX Receiver
466 +** SACN and/or Art-Net
467 +** Enable/Disable control for loads using e-DMX channel value
468 +** Map DMX to showrunner loads
469 +* EISC Export for AV Integration, dynamic creation from the UI (3-series, classic, EISC Client, EISC Server, VC-4 Client)
470 +** Configurable IP address and IP-ID, change at runtime
471 +** Configurable rooms to export, change at runtime
472 +** Changes generate new RSD file at runtime that may be provided to the AV programmer
473 +* HTTP REST API w/ Authorization
474 +* Lightweight API provides real-time control/feedback using CoAP
475 +* TCP Interface using simple ASCII commands, subscriptions supported
476 +* UDP Receiver using simple ASCII commands
477 +* Zum Floor Hub Support for integration, Export showrunner™ areas to the Floor Hub (Licensed Feature)
88 88  * Remote hardware support from neighbor ShowRunner System:
89 -** ​Allows a master ShowRunner system to integrate slave processors
479 +** ​Allows a central ShowRunner system to integrate edge processors
90 90  ** AV Serial Interface
91 91  ** Loads
92 92  ** Controllers
... ... @@ -95,18 +95,9 @@
95 95  ** Occupancy Sensor (including setup for Cresnet sensors)
96 96  ** Partition Sensors (including setup for Cresnet sensors)
97 97  ** Photocells
98 -* Web based reporting directly from the processor allows generation of as built documentation: Cresnet Discovery, Device Status, Event Schedule, Keypad Schedule, Load Schedule, and Panel Schedule
99 99  
100 -=== Integrations ===
489 +==== Reporting ====
101 101  
102 -* AV Integration protocol via serial port
103 -* BACNET Support for integration of Areas, Loads (Licensed Feature)
104 -* Crestron Fusion (Licensed Feature)
105 -* EISC Export for AV Integration, dynamic creation from the UI (3-series or classic)
106 -* Zum Floor Hub Support for integration, Export SHOWRUNNER™ areas to the Floor Hub (Licensed Feature)
107 -
108 -=== Reporting ===
109 -
110 110  ShowRunner provides a website via the processor's internal webserver with the following reports.  All data is live at the time of the generation of the report.
111 111  
112 112  * Area Load Schedule - Load schedule by Area