Skip to Content
Last modified by Alexander Mott on 2023/06/08 15:16
From version 8.1
edited by Scott Kohlmann
on 2023/04/21 14:49
Change comment: There is no comment for this version
To version 9.1
edited by Alexander Mott
on 2023/06/08 15:16
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.scott\.kohlmann@chiefintegrations\.com
1 +XWiki.alexander\.mott@chiefintegrations\.com
Content
... ... @@ -46,13 +46,15 @@
46 46  1. Press the “+” icon in the lower right of the main menu.
47 47  1. Underneath the Address 1 (Typically Local LAN) heading, there are several settings that must be changed.
48 48  11. Friendly Name / Location: This is the name that will appear in the main menu once setup is complete. If you only have one processor at your location, then you can name this whatever you want. If you have multiple processors controlling different sections of your building, then it is recommended to name this in such a way that you will know which processor it is connected to.
49 -11. Use Local Project: Keep this setting off. ShowRunnerCLC™ is not a local project as it is loaded onto the processor.
49 +11. Use Local Project
50 +11*. For most jobs, keep this setting off as the .vtz file is loaded to and served by the processor.
51 +11*. For VC-4 installations, you must use a local project as the VC-4 only has support for a single web project.
50 50  11. Host name or IP Address: This is the IP Address of the processor that you want to connect to. This information is site-specific, and Chief Integrations will provide it to you.
51 51  11. HTTP Port: Leave this at 80
52 52  11. IP ID: This setting needs to be changed to 13 for most sites. Chief Integrations will let you know if it needs to be set to another value for your application.
53 53  11. CIP: Leave this at 41794
54 54  1. Leave the settings under Address 2 (Typically Internet/Mobile) as-is and do not enable.
55 -1. Enable SSL: If you have requested that a login be required to connect to the processor, you must enable this option and put in your login information.
57 +1. Enable SSL: If you have requested that a login be required to connect to the processor, you must enable this option and put in your login information. This is also required for VC-4 installations.
56 56  1. Watch / Widget: Leave this setting off.
57 57  1. Press the Save button in the upper right to return to the main menu.
58 58