Skip to Content
Version 8.1 by Scott Kohlmann on 2021/11/11 22:26
Show last authors
1 Upload Map - Youtube Tutorial - [[https:~~/~~/www.youtube.com/watch?v=fpfHGXPhD6I>>https://www.youtube.com/watch?v=fpfHGXPhD6I]]
2
3 1. Login to showrunnerHUB™
4 1. Click on the setup gear in the upper right corner
5 1. Click on the Maps tab
6 1. Click Add Map
7 1. Fill in form(((
8 (% style="text-align:center" %)
9 [[image:Floorplan Upload Screen.png||height="474" width="194"]]
10
11 1. Bound X -Image Resolution or start with 1000
12 1. Bound Y – Image resolution or start with 1000
13 1. Initial Zoom – Start with 1
14 1. Min Zoom – Start with -2
15 1. Max Zoom – Start with 10
16 )))
17 1. Upload Image using Map File Upload Button
18 11. If you are running showrunner™ 3.10 and below follow these steps:
19 11*. If file image is over 1mb, click “Save new map.”  It will appear as though the map uploads, but it won’t due to Crestron limitation. 
20 11*1. Manually transfer the file to NVRAM -> sr-graphics
21 11*1. Refresh the page
22 1. Associate Map 
23 11. Select root node
24 11. Click Hamburger menu and Associate Map
25 11. Choose map from list that was uploaded earlier
26 11. Refresh and map will appear
27
28 Configure Floorplans
29
30 1. Add Areas
31 11. Click on Add Area Tool
32 11. Draw points around area you are creating
33 11. Once area is completed, chose area to associate to the object in drop down
34 11. Area is created
35 1. Change Color of Areas
36 11. Click on any area
37 11. Select from available colors or use hex color
38 11. Click save
39 1. Click Gear to Exit Editor