Skip to Content
Last modified by Alexander Mott on 2025/05/23 21:55
Show last authors
1 * (((
2 === Upload Map - Youtube Tutorial - [[Add and Associate Map>>https://youtu.be/5qBHFfbSMp0]] ===
3 )))
4
5
6 1. Login to ShowRunnerHUB™
7 1. Click on the setup gear in the upper right corner
8 1. Click on the Maps tab
9 1. Click Add Map
10 1*. Files must be in SVG (preferred) or PNG format
11 1*. If zooming in on a PDF floorplan does not cause the floor plan to become blurry, then it should be able to be converted to SVG using a vector graphics editor (Inkscape is a free software, but may not work with every PDF)
12 1*. If zooming in on a PDF floorplan results in the image blurring, then the PDF has been rasterized and will need to be converted to a .png in order to be used
13 1. Fill in form(((
14
15
16 [[image:Screen Shot 2021-12-10 at 1.52.42 PM.png||height="362" width="150"]]
17
18
19 1. Bound X -Image Resolution or start with 1000
20 1. Bound Y – Image resolution or start with 1000
21 1. Initial Zoom – Start with 1
22 1. Min Zoom – Start with -2
23 1. Max Zoom – Start with 10
24 )))
25 1. Upload Image using Map File Upload Button
26 11. If you are running ShowRunnerCLC™ 3.10 and below follow these steps:
27 11*. If file image is over 1mb, click “Save new map.”  It will appear as though the map uploads, but it won’t due to Crestron limitation. 
28 11*1. Manually transfer the file to NVRAM -> sr-graphics
29 11*1. Refresh the page
30 1. Associate Map 
31 11. Navigate back to main ShowRunnerHUB page
32 111. Click either ShowRunnerHUB logo in upper left corner or select Area View
33 11. Select root node
34 11. Click Hamburger menu select Add Node
35 11. Select Newly created Node
36 11. Click Hamburger menu on New Node and Associate Map
37 11. Choose map from list that was uploaded earlier
38 11. Refresh and map will appear
39
40 === Draw and Configure - Youtube Tutorial - [[Draw and Configure>>https://youtu.be/VreqGeElitU]] ===
41
42
43 1. Add Areas
44 11. Click on Settings gear icon
45 11. Click on Add Area Tool
46 11. Draw points around area you are creating
47 11. Once area is completed, chose area to associate to the object in drop down
48 11. Area is created
49 1. Change Color of Areas
50 11. Click on any area
51 11. Select from available colors or use hex color
52 11. Click save
53 1. Click Gear to Exit Editor