Skip to Content
Version 4.1 by Scott Kohlmann on 2021/10/28 19:49
Show last authors
1 Upload Map
2
3 1. Login to showrunnerHUB™
4 1. Click on the setup gear in the upper right corner
5 1. Click on the Maps tab
6 1. Click Add Map
7 1. Fill in form
8 11. Bound X -Image Resolution or start with 1000
9 11. Bound Y – Image resolution or start with 1000
10 11. Initial Zoom – Start with 1
11 11. Min Zoom – Start with -2
12 11. Max Zoom – Start with 10
13 1. Upload Image using Map File Upload Button
14 11. If you are running showrunner™ 3.10 and below follow these steps:
15 11*. If file image is over 1mb, click “Save new map.”  It will appear as though the map uploads, but it won’t due to Crestron limitation. 
16 11*1. Manually transfer the file to NVRAM -> sr-graphics
17 11*1. Refresh the page
18 1. Associate Map 
19 11. Select root node
20 11. Click Hamburger menu and Associate Map
21 11. Choose map from list that was uploaded earlier
22 11. Refresh and map will appear
23
24 Configure Floorplans
25
26 1. Add Areas
27 11. Click on Add Area Tool
28 11. Draw points around area you are creating
29 11. Once area is completed, chose area to associate to the object in drop down
30 11. Area is created
31 1. Change Color of Areas
32 11. Click on any area
33 11. Select from available colors or use hex color
34 11. Click save
35 1. Click Gear to Exit Editor