Upload and Configure Floorplans on showrunnerHUB™
Version 3.1 by Scott Kohlmann on 2021/10/26 22:44
Upload Map
- Login to showrunnerHUB™
- Click on the setup gear in the upper right corner
- Click on the Maps tab
- Click Add Map
- Fill in form
- Bound X -Image Resolution or start with 1000
- Bound Y – Image resolution or start with 1000
- Initial Zoom – Start with 1
- Min Zoom – Start with -2
- Max Zoom – Start with 10
- Upload Image using Map File Upload Button
- If file image is over 1mb, click “Save new map.” It will appear as though the map uploads, but it won’t due to Crestron limitation.
- Manually transfer the file to NVRAM -> sr-graphics
- Refresh the page
- If file image is over 1mb, click “Save new map.” It will appear as though the map uploads, but it won’t due to Crestron limitation.
- Associate Map
- Select root node
- Click Hamburger menu and Associate Map
- Choose map from list that was uploaded earlier
- Refresh and map will appear
Configure Floorplans
- Add Areas
- Click on Add Area Tool
- Draw points around area you are creating
- Once area is completed, chose area to associate to the object in drop down
- Area is created
- Change Color of Areas
- Click on any area
- Select from available colors or use hex color
- Click save
- Click Gear to Exit Editor