Skip to Content
Version 29.1 by Craig Lewis on 2023/12/22 16:07
Show last authors
1 === Upload Map - Youtube Tutorial - [[Add and Associate Map>>https://youtu.be/5qBHFfbSMp0]] ===
2
3
4 1. Login to ShowRunnerHUB™
5 1. Click on the setup gear in the upper right corner
6 1. Click on the Maps tab
7 1. Click Add Map
8 1. Fill in form(((
9
10
11 [[image:Screen Shot 2021-12-10 at 1.52.42 PM.png||height="362" width="150"]]
12
13
14 1. Bound X -Image Resolution or start with 1000
15 1. Bound Y – Image resolution or start with 1000
16 1. Initial Zoom – Start with 1
17 1. Min Zoom – Start with -2
18 1. Max Zoom – Start with 10
19 )))
20 1. Upload Image using Map File Upload Button
21 11. If you are running ShowRunnerCLC™ 3.10 and below follow these steps:
22 11*. If file image is over 1mb, click “Save new map.”  It will appear as though the map uploads, but it won’t due to Crestron limitation. 
23 11*1. Manually transfer the file to NVRAM -> sr-graphics
24 11*1. Refresh the page
25 1. Associate Map 
26 11. Select root node
27 11. Click Hamburger menu Create New Node
28 11. Select New Node
29 11. Click Hamburger menu on New Node and Associate Map
30 11. Choose map from list that was uploaded earlier
31 11. Refresh and map will appear
32
33 === Draw and Configure - Youtube Tutorial - [[Draw and Configure>>https://youtu.be/VreqGeElitU]] ===
34
35
36 1. Add Areas
37 11. Click on Settings gear icon
38 11. Click on Add Area Tool
39 11. Draw points around area you are creating
40 11. Once area is completed, chose area to associate to the object in drop down
41 11. Area is created
42 1. Change Color of Areas
43 11. Click on any area
44 11. Select from available colors or use hex color
45 11. Click save
46 1. Click Gear to Exit Editor