Floorplans - Upload and Configure on showrunnerHUB™

Upload Map - Youtube Tutorial - Add and Associate Map

1. Login to ShowRunnerHUB™
2. Click on the setup gear in the upper right corner
3. Click on the Maps tab
4. Click Add Map
5. Fill in form

    

   

   1. Bound X -Image Resolution or start with 1000
   2. Bound Y – Image resolution or start with 1000
   3. Initial Zoom – Start with 1
   4. Min Zoom – Start with -2
   5. Max Zoom – Start with 10
6. Upload Image using Map File Upload Button
   1. If you are running ShowRunnerCLC™ 3.10 and below follow these steps:
      • If file image is over 1mb, click “Save new map.”  It will appear as though the map uploads, but it won’t due to Crestron limitation. 
        1. Manually transfer the file to NVRAM -> sr-graphics
        2. Refresh the page
7. Associate Map 
   1. Select root node
   2. Click Hamburger menu Create New Node
   3. Click Hamburger menu on New Node and Associate Map
   4. Choose map from list that was uploaded earlier
   5. Refresh and map will appear

Draw and Configure - Youtube Tutorial - Draw and Configure

1. Add Areas
   1. Click on Settings gear icon
   2. Click on Add Area Tool
   3. Draw points around area you are creating
   4. Once area is completed, chose area to associate to the object in drop down
   5. Area is created
2. Change Color of Areas
   1. Click on any area
   2. Select from available colors or use hex color
   3. Click save
3. Click Gear to Exit Editor