Skip to Content
Version 26.1 by Scott Kohlmann on 2021/12/27 17:10
Show last authors
1 === Upload Map - Youtube Tutorial - [[Add and Associate Map>>https://youtu.be/5qBHFfbSMp0]] ===
2
3
4 1. Login to showrunnerHUB™
5 1. Click on the setup gear in the upper right corner
6 1. Click on the Maps tab
7 1. Click Add Map
8 1. Fill in form(((
9
10
11 [[image:Screen Shot 2021-12-10 at 1.52.42 PM.png||height="362" width="150"]]
12
13
14 1. Bound X -Image Resolution or start with 1000
15 1. Bound Y – Image resolution or start with 1000
16 1. Initial Zoom – Start with 1
17 1. Min Zoom – Start with -2
18 1. Max Zoom – Start with 10
19 )))
20 1. Upload Image using Map File Upload Button
21 11. If you are running showrunner™ 3.10 and below follow these steps:
22 11*. If file image is over 1mb, click “Save new map.”  It will appear as though the map uploads, but it won’t due to Crestron limitation. 
23 11*1. Manually transfer the file to NVRAM -> sr-graphics
24 11*1. Refresh the page
25 1. Associate Map 
26 11. Select root node
27 11. Click Hamburger menu and Associate Map
28 11. Choose map from list that was uploaded earlier
29 11. Refresh and map will appear
30
31 === Draw and Configure - Youtube Tutorial - [[Draw and Configure>>https://youtu.be/VreqGeElitU]] ===
32
33
34 1. Add Areas
35 11. Click on Settings gear icon
36 11. Click on Add Area Tool
37 11. Draw points around area you are creating
38 11. Once area is completed, chose area to associate to the object in drop down
39 11. Area is created
40 1. Change Color of Areas
41 11. Click on any area
42 11. Select from available colors or use hex color
43 11. Click save
44 1. Click Gear to Exit Editor