Skip to Content
Version 22.1 by Scott Kohlmann on 2021/12/10 22:03
Show last authors
1 === Upload Map - Youtube Tutorial - [[Add and Associate Map>>https://www.youtube.com/watch?v=9gANDtgbuo4]] ===
2
3
4 1. Login to showrunnerHUB™
5 1. Click on the setup gear in the upper right corner
6 1. Click on the Maps tab
7 1. Click Add Map
8 1. Fill in form(((
9
10
11 [[image:Screen Shot 2021-12-10 at 1.52.42 PM.png||height="362" width="150"]]
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27 ​​​
28
29
30 1. Bound X -Image Resolution or start with 1000
31 1. Bound Y – Image resolution or start with 1000
32 1. Initial Zoom – Start with 1
33 1. Min Zoom – Start with -2
34 1. Max Zoom – Start with 10
35 )))
36 1. Upload Image using Map File Upload Button
37 11. If you are running showrunner™ 3.10 and below follow these steps:
38 11*. If file image is over 1mb, click “Save new map.”  It will appear as though the map uploads, but it won’t due to Crestron limitation. 
39 11*1. Manually transfer the file to NVRAM -> sr-graphics
40 11*1. Refresh the page
41 1. Associate Map 
42 11. Select root node
43 11. Click Hamburger menu and Associate Map
44 11. Choose map from list that was uploaded earlier
45 11. Refresh and map will appear
46
47 === Draw and Configure - Youtube Tutorial - [[Draw and Configure>>https://www.youtube.com/watch?v=C-er0FgGoWU]] ===
48
49
50 1. Add Areas
51 11. Click on Settings gear icon
52 11. Click on Add Area Tool
53 11. Draw points around area you are creating
54 11. Once area is completed, chose area to associate to the object in drop down
55 11. Area is created
56 1. Change Color of Areas
57 11. Click on any area
58 11. Select from available colors or use hex color
59 11. Click save
60 1. Click Gear to Exit Editor