Wiki source code of Floorplans - Upload and Configure on showrunnerHUB™

Version 22.1 by Scott Kohlmann on 2021/12/10 22:03

version	line-number	content
15.1	1	=== Upload Map - Youtube Tutorial - [[Add and Associate Map>>https://www.youtube.com/watch?v=9gANDtgbuo4]] ===
2.1	2
15.1	3
2.1	4	1. Login to showrunnerHUB™
	5	1. Click on the setup gear in the upper right corner
	6	1. Click on the Maps tab
	7	1. Click Add Map
6.1	8	1. Fill in form(((
15.1	9
6.1	10
22.1	11	[[image:Screen Shot 2021-12-10 at 1.52.42 PM.png\|\|height="362" width="150"]]
15.1	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
16.1	24
	25
	26
18.1	27
15.1	28
17.1	29
6.1	30	1. Bound X -Image Resolution or start with 1000
	31	1. Bound Y – Image resolution or start with 1000
	32	1. Initial Zoom – Start with 1
	33	1. Min Zoom – Start with -2
	34	1. Max Zoom – Start with 10
	35	)))
2.1	36	1. Upload Image using Map File Upload Button
4.1	37	11. If you are running showrunner™ 3.10 and below follow these steps:
	38	11*. If file image is over 1mb, click “Save new map.” It will appear as though the map uploads, but it won’t due to Crestron limitation.
	39	11*1. Manually transfer the file to NVRAM -> sr-graphics
	40	11*1. Refresh the page
2.1	41	1. Associate Map
	42	11. Select root node
	43	11. Click Hamburger menu and Associate Map
3.1	44	11. Choose map from list that was uploaded earlier
2.1	45	11. Refresh and map will appear
	46
15.1	47	=== Draw and Configure - Youtube Tutorial - [[Draw and Configure>>https://www.youtube.com/watch?v=C-er0FgGoWU]] ===
	48
	49
2.1	50	1. Add Areas
10.1	51	11. Click on Settings gear icon
2.1	52	11. Click on Add Area Tool
	53	11. Draw points around area you are creating
	54	11. Once area is completed, chose area to associate to the object in drop down
	55	11. Area is created
	56	1. Change Color of Areas
	57	11. Click on any area
	58	11. Select from available colors or use hex color
	59	11. Click save
	60	1. Click Gear to Exit Editor