Wiring Guide for Electrical Contractors
Version 30.2 by Alexander Mott on 2021/12/22 23:15
Wiring Overview
Cresnet Systems
- *System Overview
- *Panel Devices
- Processors
- DIN-AP3 and DIN-AP4
- CP3N and CP4N
- Distribution Hubs
- DIN-HUB
- DIN-CENCN-2
- Low-Voltage Load Controllers
- DIN-DALI-2
- DIN-DMX-1UNIVERSE / DIN-DMX-2UNIVERSE (Pharos LPC DMX Controller)
- DIN-SACN-DMX (ENTTEC eDMX Controller)
- Power Supply
- DIN-PWS60
- Ethernet Switch
- CEN-SW-POE-5
- CEN-SWPOE-16
- Processors
- Load controllers
- Distributed
- GLPP-DIMFLVCN-PM / GLPP-1DIMFLV2CN-PM / GLPP-1DIMFLV3CN-PM
- GL-EXP-DIMU-CN / GL-EXP-DIMFLV-CN
- GLPAC-DIMFLV-8 and GLPAC-DIMFLV-4
- Panel
- GLXP
- CLX-2DIMFLV8(-277)
- CLX-2DIMU8(-277)
- Distributed
- Interface Devices
- Keypads
- C2N-CBD-P / C2N-CBD-E
- HZKP
- Sensors
- GLS-ODT-C-CN
- GLS-OIRLCL-C-CN
- GLS-SIM
- Keypads
Zūm Wired Systems
- System Overview
- Zūm Net
- *Load Controllers (ZUMNET-JBOX)
- Sensor Input Detail
- ZUMNET-JBOX-16A-LV
- ZUMNET-JBOX-DALI
- *Load Controllers (ZUMNET-JBOX)
- Zūm Link
- Zūm Link to Cresnet Wiring
- Load Controllers (ZUMLINK-JBOX)
- Sensor Input Detail
- ZUMLINK-JBOX-16A-LV
- ZUMLINK-JBOX-20A-SW / ZUMLINK-JBOX-20A-PLUG
- Interface Devices
- ZUMLINK-KP-R and ZUMLINK-KP-BTN