Skip to Content
Last modified by Alexander Mott on 2024/01/05 18:55
From version 32.1
edited by Alexander Mott
on 2022/09/19 18:46
Change comment: Renamed back-links.
To version 33.1
edited by Scott Kohlmann
on 2023/04/21 14:20
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.scott\.kohlmann@chiefintegrations\.com
Content
... ... @@ -16,7 +16,7 @@
16 16  1. Disconnect the switch leg to the fixture
17 17  1. Connect a multimeter to the switch leg output of the module
18 18  1. Measure the V AC output at various brightness levels
19 -1*. If the system has been partially or fully commissioned, it may be possible to use the showrunner™ UI to adjust the brightness
19 +1*. If the system has been partially or fully commissioned, it may be possible to use the ShowRunnerCLC™ UI to adjust the brightness
20 20  1*. Alternatively, some modules have physical buttons that can be used to adjust their brightness:
21 21  1**. Press the button to toggle the output on or off. A small LED light on the module will indicate current output on/off status.
22 22  1**. Once the output is on, press and hold the button to cycle dim the output (first press and hold will lower the output, subsequent press and holds will toggle between raising and lowering the output)