Changes for page Cresnet Wiring Overview

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -4,20 +4,12 @@
4	4	(((
5	5	Communications between Crestron Cresnet devices occurs on the Cresnet bus. Cresnet is Crestron's proprietary 4-wire communications network that provides both 24V DC power and low-voltage, bidirectional communication that adheres to to RS-485 standards.
6	6
7		-Each job with Cresnet devices will have at least one Cresnet bus network. Every Cresnet bus network has a single //host// or //primary// device and one or more //client// or //secondary// devices (older materials may refer to hosts as //masters// and clients as //slaves//). There are two limiting factors as to the number of Cresnet devices that can be supported on a single Cresnet bus: the number of available Cresnet addresses and the amount of available power.
	7	+Each job with Cresnet devices will have at least one Cresnet bus network. Every Cresnet bus network has only one //host//r //master// device and one or more //client// or //slave// devices
8	8
9		-Zūm Link wiring is covered in more detail [[here>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Troubleshooting.Zūm Wired Wiring Overview.WebHome]].
10		-
11	11	= Cabling =
12	12
13		-Cresnet cabling provides the physical infrastructure for communication between Crestron Cresnet devices and consists of a 4-wire, 2-pair cable available directly from Crestron with either plenum and non-plenum rated jackets.
	11	+Cresnet cabling provides the physical infrastructure for communication between Crestron Cresnet devices. Cresnet
14	14
15		-|=Pair|=Color|=Purpose|=Pinout
16		-|(% colspan="1" rowspan="2" %)18 AWG pair|Red|24 V DC Power|24
17		-|Black|Common|G
18		-|(% colspan="1" rowspan="2" %)22 AWG shielded twisted pair|White|Data +|Y
19		-|Blue|Data -|Z
20		-
21	21	= Terminations =
22	22
23	23	Lorem ipsum dolor sit amet,