Changes for page Cresnet Wiring Overview

Last modified by Alexander Mott on 2024/01/05 23:42

From version 20.4

edited by Alexander Mott
on 2024/01/05 20:37

Change comment: (Autosaved)

To version 20.5

edited by Alexander Mott
on 2024/01/05 20:42

Change comment: (Autosaved)

Summary

Page properties

Content

@@ -4,14 +4,13 @@
  (((
  Communications between Crestron Cresnet devices occurs on the Cresnet bus. Cresnet is Crestron's proprietary 4-wire communications network that provides both 24V DC power and low-voltage, bidirectional communication that adheres to to RS-485 standards.
--Each job with Cresnet devices will have at least one Cresnet bus network. Every Cresnet bus network has a single //host// or //primary// device and one or more //client// or //secondary// devices (older materials may use the terms //master// and //slave//).
++Each job with Cresnet devices will have at least one Cresnet bus network. Every Cresnet bus network has a single //host// or //primary// device and one or more //client// or //secondary// devices (older materials may refer to hosts as //masters// and clients as //slaves//).
  Zūm Link wiring is covered in more detail [[here>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Troubleshooting.Zūm Wired Wiring Overview.WebHome]].
--
  = Cabling =
--Cresnet cabling provides the physical infrastructure for communication between Crestron Cresnet devices. Cresnet
++Cresnet cabling provides the physical infrastructure for communication between Crestron Cresnet devices and consists of a 4-wire, 2-pair cable available directly from Crestron in both plenum and non-plenum
  = Terminations =