Skip to Content

Changes for page Cresnet Wiring Overview

Last modified by Alexander Mott on 2024/01/05 23:42
From version 20.11
edited by Alexander Mott
on 2024/01/05 21:12
Change comment: (Autosaved)
To version 20.12
edited by Alexander Mott
on 2024/01/05 21:17
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -6,17 +6,14 @@
6 6  
7 7  Each job with Cresnet devices will have at least one Cresnet bus network. Every Cresnet bus network has a single //host// or //primary// device and one or more //client// or //secondary// devices (older materials may refer to hosts as //masters// and clients as //slaves//). Every Cresnet device on a Cresnet bus must be assigned a unique, one-byte hexadecimal Cresnet address. The range of available addresses is determined by the bus host:
8 8  
9 -| | | | |
10 -| | | | |
11 -| | | | |
12 -| | | | |
13 -| | | | |
9 +|=Host|=Available Addresses|=Start|=End|=Notes
10 +|3-Series or 4-Series processor | |03|FE|
11 +|DIN-CENCN-2(-POE)| |03| |
12 +|ZUMNET-JBOX-*| |03| |Zūm Link wiring is covered in more detail [[here>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Troubleshooting.Zūm Wired Wiring Overview.WebHome]].
13 +| | |03| |
14 14  
15 15  Power considerations also play a role in determining the number of Cresnet devices which can be supported on a Cresnet bus, however we will not cover them here due to the wide array of variables which impact power calculations and determining whether there is sufficient power for a given device.
16 16  
17 -
18 -Zūm Link wiring is covered in more detail [[here>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Troubleshooting.Zūm Wired Wiring Overview.WebHome]].
19 -
20 20  = Cabling =
21 21  
22 22  Cresnet cabling provides the physical infrastructure for communication between Crestron Cresnet devices and consists of a 4-wire, 2-pair cable available directly from Crestron with either plenum and non-plenum rated jackets.