Skip to Content

Changes for page Cresnet Wiring Overview

Last modified by Alexander Mott on 2024/01/05 23:42
From version 20.10
edited by Alexander Mott
on 2024/01/05 21:07
Change comment: (Autosaved)
To version 20.14
edited by Alexander Mott
on 2024/01/05 21:27
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -6,17 +6,20 @@
6 6  
7 7  Each job with Cresnet devices will have at least one Cresnet bus network. Every Cresnet bus network has a single //host// or //primary// device and one or more //client// or //secondary// devices (older materials may refer to hosts as //masters// and clients as //slaves//). Every Cresnet device on a Cresnet bus must be assigned a unique, one-byte hexadecimal Cresnet address. The range of available addresses is determined by the bus host:
8 8  
9 -| | | | |
10 -| | | | |
11 -| | | | |
12 -| | | | |
13 -| | | | |
9 +|=(% style="width: 186px;" %)Host|=(% style="width: 62px;" %)Available Addresses|=Start|=End|=Notes
10 +|(% style="width:186px" %)3-Series or 4-Series processor |(% style="width:62px" %)252^^1^^|03|FE|^^1^^Chief Integrations has experienced significant communications slowdowns on systems with more than 100 devices, and recommends using DIN-CENCN-2(-POE) or additional processors to break up larger networks
11 +|(% style="width:186px" %)DIN-CENCN-2(-POE)|(% style="width:62px" %)(((
12 +25 per Net (50 total)
13 +)))|03|1B|
14 +|(% style="width:186px" %)ZUMNET-JBOX-*|(% style="width:62px" %)32^^1^^|03|22|(((
15 +Zūm Link and Cresnet can be intermingled; more details are available [[here>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Troubleshooting.Zūm Wired Wiring Overview.WebHome]]
14 14  
17 +^^1^^ZUMNET-JBOX local controller counts as a device; only 31 additional Zūm Link or Cresnet devices may be connected
18 +)))
19 +|(% style="width:186px" %)GLPAC-DIMFLV*|(% style="width:62px" %) |03| |
20 +
15 15  Power considerations also play a role in determining the number of Cresnet devices which can be supported on a Cresnet bus, however we will not cover them here due to the wide array of variables which impact power calculations and determining whether there is sufficient power for a given device.
16 16  
17 -
18 -Zūm Link wiring is covered in more detail [[here>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Troubleshooting.Zūm Wired Wiring Overview.WebHome]].
19 -
20 20  = Cabling =
21 21  
22 22  Cresnet cabling provides the physical infrastructure for communication between Crestron Cresnet devices and consists of a 4-wire, 2-pair cable available directly from Crestron with either plenum and non-plenum rated jackets.