Skip to Content
Last modified by Alexander Mott on 2024/01/05 18:55
From version 20.1
edited by Alexander Mott
on 2022/09/19 16:12
Change comment: There is no comment for this version
To version 32.1
edited by Alexander Mott
on 2024/01/05 18:55
Change comment: Renamed back-links.

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ Setup Guide.WebHome
1 +SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Troubleshooting.WebHome
Content
... ... @@ -1,7 +5,3 @@
1 -{{box cssClass="floatinginfobox" title="**CONTENTS**"}}
2 -{{toc/}}
3 -{{/box}}
4 -
5 5  (% class="row" %)
6 6  (((
7 7  (% class="col-xs-12 col-sm-8" %)
... ... @@ -16,7 +16,7 @@
16 16  1. Disconnect the 0-10V wiring to the fixtures
17 17  1. Connect a multimeter to the 0-10V dimming output of the module
18 18  1. Measure the 0-10V output at various brightness levels
19 -1*. If the system has been partially or fully commissioned, it may be possible to use the showrunner™ UI to adjust the brightness
15 +1*. If the system has been partially or fully commissioned, it may be possible to use the ShowRunnerCLC™ UI to adjust the brightness
20 20  1*. Alternatively, some modules have physical buttons that can be used to adjust their brightness:
21 21  1**. Press the button to toggle the output on or off. A small LED light on the module will indicate current output on/off status.
22 22  1**. Once the output is on, press and hold the button to cycle dim the output (first press and hold will lower the output, subsequent press and holds will toggle between raising and lowering the output)
... ... @@ -47,7 +47,7 @@
47 47  1. Identify the module and output that should be controlling the fixtures
48 48  1. Disconnect the 0-10V wiring to the fixtures
49 49  1. Toggle the module output on and off to verify it is switching the correct zone
50 -1*. If the system has been partially or fully commissioned, it may be possible to use the showrunner™ UI to toggle the module output
46 +1*. If the system has been partially or fully commissioned, it may be possible to use the ShowRunnerCLC™ UI to toggle the module output
51 51  1*. Alternatively, some modules have physical buttons that can be used to toggle the output:
52 52  1**. Press the button to toggle the output on or off. A small LED light on the module will indicate current output on/off status.
53 53  1**. Once the output is on, press and hold the button to cycle dim the output (first press and hold will lower the output, subsequent press and holds will toggle between raising and lowering the output)
... ... @@ -177,9 +177,12 @@
177 177  
178 178  )))
179 179  
180 -
181 181  (% class="col-xs-12 col-sm-4" %)
182 182  (((
178 +{{box title="**CONTENTS**"}}
179 +{{toc/}}
180 +{{/box}}
181 +
183 183  (% class="wikigeneratedid" id="HFigure1" %)
184 184  (((
185 185  [[[[image:zumlink.png]]>>attach:zumlink.png]]