Skip to Content
Last modified by Alexander Mott on 2024/01/05 18:55
From version 20.1
edited by Alexander Mott
on 2022/09/19 16:12
Change comment: There is no comment for this version
To version 24.2
edited by Alexander Mott
on 2022/09/19 18:40
Change comment: Update document after refactoring.

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ Setup Guide.WebHome
1 +SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Troubleshooting.WebHome
Content
... ... @@ -1,7 +5,3 @@
1 -{{box cssClass="floatinginfobox" title="**CONTENTS**"}}
2 -{{toc/}}
3 -{{/box}}
4 -
5 5  (% class="row" %)
6 6  (((
7 7  (% class="col-xs-12 col-sm-8" %)
... ... @@ -105,7 +105,7 @@
105 105  
106 106  On the front of the Zūm JBOX-16A-LV (outside the junction box) are two or three LEDs next to a black button. The LED labeled "TEST" will be green if the output is hot. The black button can be used to toggle the output on or off, and holding the button will cycle dim the 0-10V output.
107 107  
108 -See //[[Figure 1>>WebHome||anchor="HFigure1"]]// for details.
104 +See //[[Figure 1>>SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Wiring and Hardware.0-10V Dimming Troubleshooting.WebHome||anchor="HFigure1"]]// for details.
109 109  
110 110  == CLX-2DIMFLV8 and CLX-2DIMFLV8-277 ==
111 111  
... ... @@ -115,7 +115,7 @@
115 115  
116 116  On the front of 0-10V CLX modules are eight buttons corresponding to each of the eight outputs. Next to each button is a red LED indicating the current load status. The LED will be lit if the output is on. To the right of the LED is the 0-10V output for each channel, which can be easily unplugged for troubleshooting. The buttons can be used to toggle each channel independently, and holding the button will cycle dim the 0-10V output for that channel.
117 117  
118 -See //[[Figure 2>>WebHome||anchor="HFigure2"]]// for details.
114 +See //[[Figure 2>>SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Wiring and Hardware.0-10V Dimming Troubleshooting.WebHome||anchor="HFigure2"]]// for details.
119 119  
120 120  == GL-EXP-DIMFLV-CN ==
121 121  
... ... @@ -147,7 +147,7 @@
147 147  
148 148  The 0-10V outputs are located on the top right of the module. A small screwdriver is required to disconnect the dimming to the fixtures.
149 149  
150 -See //[[Figure 3>>WebHome||anchor="HFigure3"]]// for details.
146 +See //[[Figure 3>>SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Wiring and Hardware.0-10V Dimming Troubleshooting.WebHome||anchor="HFigure3"]]// for details.
151 151  
152 152  == GLXP-DIMFLV8 (Discontinued) ==
153 153  
... ... @@ -159,7 +159,7 @@
159 159  
160 160  The 0-10V outputs are split into the eight negative outputs and the eight positive outputs on the lower left of the module. A small screwdriver is required to disconnect the dimming to the fixtures.
161 161  
162 -See //[[Figure 4>>WebHome||anchor="HFigure4"]]// for details.
158 +See //[[Figure 4>>SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Wiring and Hardware.0-10V Dimming Troubleshooting.WebHome||anchor="HFigure4"]]// for details.
163 163  
164 164  = Real World 0-10V Data =
165 165  
... ... @@ -177,9 +177,12 @@
177 177  
178 178  )))
179 179  
180 -
181 181  (% class="col-xs-12 col-sm-4" %)
182 182  (((
178 +{{box title="**CONTENTS**"}}
179 +{{toc/}}
180 +{{/box}}
181 +
183 183  (% class="wikigeneratedid" id="HFigure1" %)
184 184  (((
185 185  [[[[image:zumlink.png]]>>attach:zumlink.png]]