Skip to Content
Last modified by Austin Weygandt on 2025/04/18 15:47
From version 7.1
edited by Mark Kohlmann
on 2021/07/22 23:51
Change comment: There is no comment for this version
To version 5.1
edited by Mark Kohlmann
on 2021/07/22 23:42
Change comment: Uploaded new attachment "1626997350133-604.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,85 +6,1 @@
1 -(% class="box warningmessage" %)
2 -(((
3 -Buttons 5 and 6 do not appear to be working, we are consulting with Crestron
4 -)))
5 -
6 6  ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  AV keypads have not been verified for support yet, this only applies to regular lighting keypads.  Overriding buttons is done on per button basis.
7 -
8 -Requirements:
9 -
10 -* JBOX w/ NETBRIDGE
11 -* ZUMMESH Firmware v1.07.016 or newer
12 -* NETBRIDGE defined in ShowRunner as a load controller
13 -* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads pending verification of support)
14 -* ShowRunner™ 3.004 or newer
15 -
16 -Keypads have 6 buttons, each can be exported individually:
17 -[[image:ZUMMESH-KP Buttons.png]]
18 -
19 -Keypad definition in ShowRunner config:
20 -
21 -##//**DeviceConnectionId**//## is the KeypadId used to uniquely identify the ZUMMESH-KP.  This must be between 1 and 255.
22 -##//**DeviceHostId**// ##is the IP-ID of the RF Gateway that owns the NETBRIDGE
23 -##//**DeviceHostBranch**// ##is the RF-ID of the NETBRIDGE on the gateway
24 -##//**Model**// ##may be the actual keypad model excluding the color and finish.  Example ZUMMESH-KP10GBATT-GRY-S is "ZUMMESH-KP10GBATT".  "ZUMMESH-KP" or "ZUMMESH-KPBATT" may also be used.
25 -
26 -## "7": {
27 - "AreaId": 2,
28 - "LinkedAreaIds": null,
29 - "Id": 7,
30 - "Name": "Zummesh KP",
31 -**~ "//DeviceConnectionId//": "1",**
32 -**~ "//DeviceHostId//": "B0",**
33 -**~ "//DeviceHostBranch//": 5,**
34 - "SerialNumber": "",
35 - "DisableOff": false,
36 - "DisallowDisable": false,
37 - "FlipRaiseLower": false,
38 - "MasterRaiseButtonIndex": 0,
39 - "MasterLowerButtonIndex": 0,
40 - "HoldTime": 0.5,
41 - "DoubleTapTime": 0.5,
42 - "//**Model**//": "ZUMMESH-KPBATT",
43 - "Enabled": true,
44 - "KeypadType": "A",
45 - "ControllerIds": [],
46 - "DirectLoadIds": null,
47 - "Actions": null,
48 - }##
49 -
50 -==== Automatic Setup: ====
51 -
52 -This method will automatically enable all buttons to report to ShowRunner™
53 -
54 -* Console to ShowRunner
55 -* Obtain the keypad address by querying the devices on the NETBRIDGE:
56 -##sr zummesh show devices [Gateway IP-ID in hex] [NETBRIDGE RF-ID in hex]##
57 -Example: ##sr zummesh show devices B0 1A##
58 -[[image:1626996842264-632.png]]
59 -* Setup the keypad buttons that will report to ShowRunner™:
60 -##sr zummesh keypad custom buttons [Gateway IP-ID] [NETBRIDGE RF-ID] [Keypad Address] [Keypad Id] [List of Buttons to Override Local Logic, comma/dash separated list]##
61 -Example: ##sr zummesh keypad custom buttons B0 1A 52E5 1 1-6##
62 -[[image:1626997279912-938.png]]
63 -
64 -==== Manual Setup: ====
65 -
66 -Use this setup method if you wish to assign specific ShowRunner™ button IDs to ZUMMESH-KPs or selective send buttons to ShowRunner™
67 -
68 -* Connect to RF Gateway console
69 -* ##RFRCON [NETBRIDGE RF-ID] DISPLAYDEVICES## to obtain the Addr of the Keypad
70 -[[image:1626997350133-604.png]]
71 -* Calculate Button IDs:
72 -Keypad IDs are 1 to 255
73 -Button Numbers are 1 to 6
74 -Tap Action is 0
75 -Hold Action is 1
76 -Release Action is 2
77 -ExportId = (Keypad ID << 8) + (Button Number << 4) + ButtonAction
78 -Example for keypad id of 2 button 2 w/ hold action
79 -##(2 << 8) + (2 << 4) + 1 = 545 or 221h##
80 -Example for keypad id of 128 button 5 w/ tap action
81 -##(128 << 8) + (5 << 4) + 0 = 32848 or 8050h##
82 -* Send command per button to enable reporting:
83 -##rfrcon [NETBRIDGE-RFID] setbuttfunc [KEYPAD ADDRESS] [ButtonNumber] 22 [Tap-ExportID in hex] [Hold-ExportID in hex] [Release-ExportID in hex]
84 -rfrcon 03 setbuttfunc 52E5 2 22 220 221 222##
85 -[[image:1626997728072-241.png]]
1626997728072-241.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -5.7 KB
Content