Skip to Content
Last modified by Mark Kohlmann on 2024/04/05 19:48
From version 6.2
edited by Mark Kohlmann
on 2021/07/22 23:51
Change comment: There is no comment for this version
To version 8.1
edited by Mark Kohlmann
on 2021/07/23 03:30
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,9 @@
1 1  (% class="box warningmessage" %)
2 2  (((
3 -Buttons 5 and 6 do not appear to be working, we are consulting with Crestron
3 +Buttons 5 and 6 presently cannot be exposed to ShowRunner and will only work locally.  ZUMMESH-KPAV type keypads are not supported with this approach and require an AVBRIDGE.
4 4  )))
5 5  
6 -ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  AV keypads have not been verified for support yet, this only applies to regular lighting keypads.  Overriding buttons is done on per button basis.
6 +ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  Overriding buttons is done on a per button basis.
7 7  
8 8  Requirements:
9 9  
... ... @@ -10,10 +10,10 @@
10 10  * JBOX w/ NETBRIDGE
11 11  * ZUMMESH Firmware v1.07.016 or newer
12 12  * NETBRIDGE defined in ShowRunner as a load controller
13 -* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads)
13 +* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads pending verification of support)
14 14  * ShowRunner™ 3.004 or newer
15 15  
16 -Keypads have 6 buttons, each can be exported individually:
16 +Keypads have 6 buttons, 1 through 4 can be exported individually, 5 and 6 are supported by ShowRunner but not Crestron:
17 17  [[image:ZUMMESH-KP Buttons.png]]
18 18  
19 19  Keypad definition in ShowRunner config: