Skip to Content
Last modified by Mark Kohlmann on 2024/04/05 19:48
From version 6.1
edited by Mark Kohlmann
on 2021/07/22 23:48
Change comment: Uploaded new attachment "1626997728072-241.png", version {1}
To version 6.2
edited by Mark Kohlmann
on 2021/07/22 23:51
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,3 +1,8 @@
1 +(% class="box warningmessage" %)
2 +(((
3 +Buttons 5 and 6 do not appear to be working, we are consulting with Crestron
4 +)))
5 +
1 1  ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  AV keypads have not been verified for support yet, this only applies to regular lighting keypads.  Overriding buttons is done on per button basis.
2 2  
3 3  Requirements:
... ... @@ -44,6 +44,8 @@
44 44  
45 45  ==== Automatic Setup: ====
46 46  
52 +This method will automatically enable all buttons to report to ShowRunner™
53 +
47 47  * Console to ShowRunner
48 48  * Obtain the keypad address by querying the devices on the NETBRIDGE:
49 49  ##sr zummesh show devices [Gateway IP-ID in hex] [NETBRIDGE RF-ID in hex]##
... ... @@ -51,12 +51,28 @@
51 51  [[image:1626996842264-632.png]]
52 52  * Setup the keypad buttons that will report to ShowRunner™:
53 53  ##sr zummesh keypad custom buttons [Gateway IP-ID] [NETBRIDGE RF-ID] [Keypad Address] [Keypad Id] [List of Buttons to Override Local Logic, comma/dash separated list]##
54 -Example: sr zummesh keypad custom buttons B0 1A 52E5 1 1-6
61 +Example: ##sr zummesh keypad custom buttons B0 1A 52E5 1 1-6##
55 55  [[image:1626997279912-938.png]]
56 56  
57 57  ==== Manual Setup: ====
58 58  
66 +Use this setup method if you wish to assign specific ShowRunner™ button IDs to ZUMMESH-KPs or selective send buttons to ShowRunner™
67 +
59 59  * Connect to RF Gateway console
60 -* RFRCON [NETBRIDGE RF-ID] DISPLAYDEVICES
69 +* ##RFRCON [NETBRIDGE RF-ID] DISPLAYDEVICES## to obtain the Addr of the Keypad
61 61  [[image:1626997350133-604.png]]
62 -*
71 +* Calculate Button IDs:
72 +Keypad IDs are 1 to 255
73 +Button Numbers are 1 to 6
74 +Tap Action is 0
75 +Hold Action is 1
76 +Release Action is 2
77 +ExportId = (Keypad ID << 8) + (Button Number << 4) + ButtonAction
78 +Example for keypad id of 2 button 2 w/ hold action
79 +##(2 << 8) + (2 << 4) + 1 = 545 or 221h##
80 +Example for keypad id of 128 button 5 w/ tap action
81 +##(128 << 8) + (5 << 4) + 0 = 32848 or 8050h##
82 +* Send command per button to enable reporting:
83 +##rfrcon [NETBRIDGE-RFID] setbuttfunc [KEYPAD ADDRESS] [ButtonNumber] 22 [Tap-ExportID in hex] [Hold-ExportID in hex] [Release-ExportID in hex]
84 +rfrcon 03 setbuttfunc 52E5 2 22 220 221 222##
85 +[[image:1626997728072-241.png]]