Skip to Content
Last modified by Mark Kohlmann on 2024/04/05 19:48
From version 5.1
edited by Mark Kohlmann
on 2021/07/22 23:42
Change comment: Uploaded new attachment "1626997350133-604.png", version {1}
To version 6.2
edited by Mark Kohlmann
on 2021/07/22 23:51
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,1 +1,85 @@
1 +(% class="box warningmessage" %)
2 +(((
3 +Buttons 5 and 6 do not appear to be working, we are consulting with Crestron
4 +)))
5 +
1 1  ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  AV keypads have not been verified for support yet, this only applies to regular lighting keypads.  Overriding buttons is done on per button basis.
7 +
8 +Requirements:
9 +
10 +* JBOX w/ NETBRIDGE
11 +* ZUMMESH Firmware v1.07.016 or newer
12 +* NETBRIDGE defined in ShowRunner as a load controller
13 +* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads)
14 +* ShowRunner™ 3.004 or newer
15 +
16 +Keypads have 6 buttons, each can be exported individually:
17 +[[image:ZUMMESH-KP Buttons.png]]
18 +
19 +Keypad definition in ShowRunner config:
20 +
21 +##//**DeviceConnectionId**//## is the KeypadId used to uniquely identify the ZUMMESH-KP.  This must be between 1 and 255.
22 +##//**DeviceHostId**// ##is the IP-ID of the RF Gateway that owns the NETBRIDGE
23 +##//**DeviceHostBranch**// ##is the RF-ID of the NETBRIDGE on the gateway
24 +##//**Model**// ##may be the actual keypad model excluding the color and finish.  Example ZUMMESH-KP10GBATT-GRY-S is "ZUMMESH-KP10GBATT".  "ZUMMESH-KP" or "ZUMMESH-KPBATT" may also be used.
25 +
26 +## "7": {
27 + "AreaId": 2,
28 + "LinkedAreaIds": null,
29 + "Id": 7,
30 + "Name": "Zummesh KP",
31 +**~ "//DeviceConnectionId//": "1",**
32 +**~ "//DeviceHostId//": "B0",**
33 +**~ "//DeviceHostBranch//": 5,**
34 + "SerialNumber": "",
35 + "DisableOff": false,
36 + "DisallowDisable": false,
37 + "FlipRaiseLower": false,
38 + "MasterRaiseButtonIndex": 0,
39 + "MasterLowerButtonIndex": 0,
40 + "HoldTime": 0.5,
41 + "DoubleTapTime": 0.5,
42 + "//**Model**//": "ZUMMESH-KPBATT",
43 + "Enabled": true,
44 + "KeypadType": "A",
45 + "ControllerIds": [],
46 + "DirectLoadIds": null,
47 + "Actions": null,
48 + }##
49 +
50 +==== Automatic Setup: ====
51 +
52 +This method will automatically enable all buttons to report to ShowRunner™
53 +
54 +* Console to ShowRunner
55 +* Obtain the keypad address by querying the devices on the NETBRIDGE:
56 +##sr zummesh show devices [Gateway IP-ID in hex] [NETBRIDGE RF-ID in hex]##
57 +Example: ##sr zummesh show devices B0 1A##
58 +[[image:1626996842264-632.png]]
59 +* Setup the keypad buttons that will report to ShowRunner™:
60 +##sr zummesh keypad custom buttons [Gateway IP-ID] [NETBRIDGE RF-ID] [Keypad Address] [Keypad Id] [List of Buttons to Override Local Logic, comma/dash separated list]##
61 +Example: ##sr zummesh keypad custom buttons B0 1A 52E5 1 1-6##
62 +[[image:1626997279912-938.png]]
63 +
64 +==== Manual Setup: ====
65 +
66 +Use this setup method if you wish to assign specific ShowRunner™ button IDs to ZUMMESH-KPs or selective send buttons to ShowRunner™
67 +
68 +* Connect to RF Gateway console
69 +* ##RFRCON [NETBRIDGE RF-ID] DISPLAYDEVICES## to obtain the Addr of the Keypad
70 +[[image:1626997350133-604.png]]
71 +* Calculate Button IDs:
72 +Keypad IDs are 1 to 255
73 +Button Numbers are 1 to 6
74 +Tap Action is 0
75 +Hold Action is 1
76 +Release Action is 2
77 +ExportId = (Keypad ID << 8) + (Button Number << 4) + ButtonAction
78 +Example for keypad id of 2 button 2 w/ hold action
79 +##(2 << 8) + (2 << 4) + 1 = 545 or 221h##
80 +Example for keypad id of 128 button 5 w/ tap action
81 +##(128 << 8) + (5 << 4) + 0 = 32848 or 8050h##
82 +* Send command per button to enable reporting:
83 +##rfrcon [NETBRIDGE-RFID] setbuttfunc [KEYPAD ADDRESS] [ButtonNumber] 22 [Tap-ExportID in hex] [Hold-ExportID in hex] [Release-ExportID in hex]
84 +rfrcon 03 setbuttfunc 52E5 2 22 220 221 222##
85 +[[image:1626997728072-241.png]]
1626997728072-241.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +5.7 KB
Content