Skip to Content
Last modified by Mark Kohlmann on 2024/04/05 19:48
From version 5.1
edited by Mark Kohlmann
on 2021/07/22 23:42
Change comment: Uploaded new attachment "1626997350133-604.png", version {1}
To version 6.1
edited by Mark Kohlmann
on 2021/07/22 23:48
Change comment: Uploaded new attachment "1626997728072-241.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,1 +1,62 @@
1 1  ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  AV keypads have not been verified for support yet, this only applies to regular lighting keypads.  Overriding buttons is done on per button basis.
2 +
3 +Requirements:
4 +
5 +* JBOX w/ NETBRIDGE
6 +* ZUMMESH Firmware v1.07.016 or newer
7 +* NETBRIDGE defined in ShowRunner as a load controller
8 +* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads)
9 +* ShowRunner™ 3.004 or newer
10 +
11 +Keypads have 6 buttons, each can be exported individually:
12 +[[image:ZUMMESH-KP Buttons.png]]
13 +
14 +Keypad definition in ShowRunner config:
15 +
16 +##//**DeviceConnectionId**//## is the KeypadId used to uniquely identify the ZUMMESH-KP.  This must be between 1 and 255.
17 +##//**DeviceHostId**// ##is the IP-ID of the RF Gateway that owns the NETBRIDGE
18 +##//**DeviceHostBranch**// ##is the RF-ID of the NETBRIDGE on the gateway
19 +##//**Model**// ##may be the actual keypad model excluding the color and finish.  Example ZUMMESH-KP10GBATT-GRY-S is "ZUMMESH-KP10GBATT".  "ZUMMESH-KP" or "ZUMMESH-KPBATT" may also be used.
20 +
21 +## "7": {
22 + "AreaId": 2,
23 + "LinkedAreaIds": null,
24 + "Id": 7,
25 + "Name": "Zummesh KP",
26 +**~ "//DeviceConnectionId//": "1",**
27 +**~ "//DeviceHostId//": "B0",**
28 +**~ "//DeviceHostBranch//": 5,**
29 + "SerialNumber": "",
30 + "DisableOff": false,
31 + "DisallowDisable": false,
32 + "FlipRaiseLower": false,
33 + "MasterRaiseButtonIndex": 0,
34 + "MasterLowerButtonIndex": 0,
35 + "HoldTime": 0.5,
36 + "DoubleTapTime": 0.5,
37 + "//**Model**//": "ZUMMESH-KPBATT",
38 + "Enabled": true,
39 + "KeypadType": "A",
40 + "ControllerIds": [],
41 + "DirectLoadIds": null,
42 + "Actions": null,
43 + }##
44 +
45 +==== Automatic Setup: ====
46 +
47 +* Console to ShowRunner
48 +* Obtain the keypad address by querying the devices on the NETBRIDGE:
49 +##sr zummesh show devices [Gateway IP-ID in hex] [NETBRIDGE RF-ID in hex]##
50 +Example: ##sr zummesh show devices B0 1A##
51 +[[image:1626996842264-632.png]]
52 +* Setup the keypad buttons that will report to ShowRunner™:
53 +##sr zummesh keypad custom buttons [Gateway IP-ID] [NETBRIDGE RF-ID] [Keypad Address] [Keypad Id] [List of Buttons to Override Local Logic, comma/dash separated list]##
54 +Example: sr zummesh keypad custom buttons B0 1A 52E5 1 1-6
55 +[[image:1626997279912-938.png]]
56 +
57 +==== Manual Setup: ====
58 +
59 +* Connect to RF Gateway console
60 +* RFRCON [NETBRIDGE RF-ID] DISPLAYDEVICES
61 +[[image:1626997350133-604.png]]
62 +*
1626997728072-241.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +5.7 KB
Content