Skip to Content
Last modified by Austin Weygandt on 2025/04/18 15:47
From version 4.1
edited by Mark Kohlmann
on 2021/07/22 23:41
Change comment: Uploaded new attachment "1626997279912-938.png", version {1}
To version 14.1
edited by Austin Weygandt
on 2025/04/18 15:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ User Guide & Wiki.Troubleshooting.WebHome
1 +SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.WebHome
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
1 +XWiki.austin\.weygandt@chiefintegrations\.com
Content
... ... @@ -1,1 +1,101 @@
1 -ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  AV keypads have not been verified for support yet, this only applies to regular lighting keypads.  Overriding buttons is done on per button basis.
1 +(% class="box warningmessage" %)
2 +(((
3 +Buttons 5 and 6 presently cannot be exposed to ShowRunnerCLC™ and will only work locally.  ZUMMESH-KPAV type keypads are not supported with this approach and require an AVBRIDGE.
4 +)))
5 +
6 +{{error}}
7 + FIRMWARE REQUIREMENTS:
8 +
9 +* ZUMMESH Firmware v1.07.016 or newer
10 +** NETBRIDGE firmware v1.013.0021
11 +** ZUM-KPBATT firmware v1.000.0113
12 +** ZUM-JBOX-SIM firmware v1.000.067
13 +{{/error}}
14 +
15 +ShowRunnerCLC™ supports receiving button presses from ZUMMESH-KP* keypads.  Overriding buttons is done on a per button basis.
16 +
17 +Requirements:
18 +
19 +* JBOX w/ NETBRIDGE
20 +* ZUMMESH Firmware v1.07.016 or newer
21 +** NETBRIDGE firmware v1.013.0021
22 +** ZUM-KPBATT firmware v1.000.0113
23 +** ZUM-JBOX-SIM firmware v1.000.067
24 +* NETBRIDGE defined in ShowRunner as a load controller
25 +* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads are not supported due to lack of firmware support)
26 +* ShowRunner™ 3.004 or newer
27 +
28 +Keypads have 6 buttons, 1 through 4 can be exported individually, 5 and 6 are supported by ShowRunner but not Crestron:
29 +[[image:ZUMMESH-KP Buttons.png]]
30 +
31 +
32 +JBOX-SIM is supported. O is button 1, V is button 2, and D is button 3.
33 +
34 +
35 +Keypad definition in ShowRunner config:
36 +
37 +##//**DeviceConnectionId**//## is the KeypadId used to uniquely identify the ZUMMESH-KP.  This must be between 1 and 255.
38 +##//**DeviceHostId**// ##is the IP-ID of the RF Gateway that owns the NETBRIDGE
39 +##//**DeviceHostBranch**// ##is the RF-ID of the NETBRIDGE on the gateway
40 +##//**Model**// ##may be the actual keypad model excluding the color and finish.  Example ZUMMESH-KP10GBATT-GRY-S is "ZUMMESH-KP10GBATT".  "ZUMMESH-KP" or "ZUMMESH-KPBATT" may also be used.
41 +
42 +## "7": {
43 + "AreaId": 2,
44 + "LinkedAreaIds": null,
45 + "Id": 7,
46 + "Name": "Zummesh KP",
47 +**~ "//DeviceConnectionId//": "1",**
48 +**~ "//DeviceHostId//": "B0",**
49 +**~ "//DeviceHostBranch//": 5,**
50 + "SerialNumber": "",
51 + "DisableOff": false,
52 + "DisallowDisable": false,
53 + "FlipRaiseLower": false,
54 + "MasterRaiseButtonIndex": 0,
55 + "MasterLowerButtonIndex": 0,
56 + "HoldTime": 0.5,
57 + "DoubleTapTime": 0.5,
58 + "//**Model**//": "ZUMMESH-KPBATT",
59 + "Enabled": true,
60 + "KeypadType": "A",
61 + "ControllerIds": [],
62 + "DirectLoadIds": null,
63 + "Actions": null,
64 + }##
65 +
66 +==== Automatic Setup: ====
67 +
68 +This method will automatically enable all buttons to report to ShowRunnerCLC™
69 +
70 +* Console to ShowRunnerCLC™
71 +* Obtain the keypad address by querying the devices on the NETBRIDGE:
72 +##sr zummesh show devices [Gateway IP-ID in hex] [NETBRIDGE RF-ID in hex]##
73 +Example: ##sr zummesh show devices B0 1A##
74 +[[image:1626996842264-632.png]]
75 +* Setup the keypad buttons that will report to ShowRunnerCLC™:
76 +##sr zummesh keypad custom buttons [Gateway IP-ID] [NETBRIDGE RF-ID] [Keypad Address] [Keypad Id] [List of Buttons to Override Local Logic, comma/dash separated list]##
77 +Example: ##sr zummesh keypad custom buttons B0 1A 52E5 1 1-6##
78 +[[image:1626997279912-938.png]]
79 +
80 +==== Manual Setup: ====
81 +
82 +Use this setup method if you wish to assign specific ShowRunnerCLC™ button IDs to ZUMMESH-KPs or selective send buttons to ShowRunnerCLC™
83 +
84 +* Connect to RF Gateway console
85 +* ##RFRCON [NETBRIDGE RF-ID] DISPLAYDEVICES## to obtain the Addr of the Keypad
86 +[[image:1626997350133-604.png]]
87 +* Calculate Button IDs:
88 +Keypad IDs are 1 to 255
89 +Button Numbers are 1 to 6
90 +Tap Action is 0
91 +Hold Action is 1
92 +Release Action is 2
93 +ExportId = (Keypad ID << 8) + (Button Number << 4) + ButtonAction
94 +Example for keypad id of 2 button 2 w/ hold action
95 +##(2 << 8) + (2 << 4) + 1 = 545 or 221h##
96 +Example for keypad id of 128 button 5 w/ tap action
97 +##(128 << 8) + (5 << 4) + 0 = 32848 or 8050h##
98 +* Send command per button to enable reporting:
99 +##rfrcon [NETBRIDGE-RFID] setbuttfunc [KEYPAD ADDRESS] [ButtonNumber] 22 [Tap-ExportID in hex] [Hold-ExportID in hex] [Release-ExportID in hex]
100 +rfrcon 03 setbuttfunc 52E5 2 22 220 221 222##
101 +[[image:1626997728072-241.png]]
1626997350133-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +67.1 KB
Content
1626997728072-241.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +5.7 KB
Content