Skip to Content
Last modified by Austin Weygandt on 2025/04/18 15:47
From version 4.1
edited by Mark Kohlmann
on 2021/07/22 23:41
Change comment: Uploaded new attachment "1626997279912-938.png", version {1}
To version 10.1
edited by Mark Kohlmann
on 2021/08/20 22:19
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,1 +1,87 @@
1 -ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  AV keypads have not been verified for support yet, this only applies to regular lighting keypads.  Overriding buttons is done on per button basis.
1 +(% class="box warningmessage" %)
2 +(((
3 +Buttons 5 and 6 presently cannot be exposed to ShowRunner and will only work locally.  ZUMMESH-KPAV type keypads are not supported with this approach and require an AVBRIDGE.
4 +)))
5 +
6 +ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  Overriding buttons is done on a per button basis.
7 +
8 +Requirements:
9 +
10 +* JBOX w/ NETBRIDGE
11 +* ZUMMESH Firmware v1.07.016 or newer
12 +** NETBRIDGE firmware v1.013.0021
13 +** ZUM-KPBATT firmware v0010000113
14 +* NETBRIDGE defined in ShowRunner as a load controller
15 +* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads are not supported due to lack of firmware support)
16 +* ShowRunner™ 3.004 or newer
17 +
18 +Keypads have 6 buttons, 1 through 4 can be exported individually, 5 and 6 are supported by ShowRunner but not Crestron:
19 +[[image:ZUMMESH-KP Buttons.png]]
20 +
21 +Keypad definition in ShowRunner config:
22 +
23 +##//**DeviceConnectionId**//## is the KeypadId used to uniquely identify the ZUMMESH-KP.  This must be between 1 and 255.
24 +##//**DeviceHostId**// ##is the IP-ID of the RF Gateway that owns the NETBRIDGE
25 +##//**DeviceHostBranch**// ##is the RF-ID of the NETBRIDGE on the gateway
26 +##//**Model**// ##may be the actual keypad model excluding the color and finish.  Example ZUMMESH-KP10GBATT-GRY-S is "ZUMMESH-KP10GBATT".  "ZUMMESH-KP" or "ZUMMESH-KPBATT" may also be used.
27 +
28 +## "7": {
29 + "AreaId": 2,
30 + "LinkedAreaIds": null,
31 + "Id": 7,
32 + "Name": "Zummesh KP",
33 +**~ "//DeviceConnectionId//": "1",**
34 +**~ "//DeviceHostId//": "B0",**
35 +**~ "//DeviceHostBranch//": 5,**
36 + "SerialNumber": "",
37 + "DisableOff": false,
38 + "DisallowDisable": false,
39 + "FlipRaiseLower": false,
40 + "MasterRaiseButtonIndex": 0,
41 + "MasterLowerButtonIndex": 0,
42 + "HoldTime": 0.5,
43 + "DoubleTapTime": 0.5,
44 + "//**Model**//": "ZUMMESH-KPBATT",
45 + "Enabled": true,
46 + "KeypadType": "A",
47 + "ControllerIds": [],
48 + "DirectLoadIds": null,
49 + "Actions": null,
50 + }##
51 +
52 +==== Automatic Setup: ====
53 +
54 +This method will automatically enable all buttons to report to ShowRunner™
55 +
56 +* Console to ShowRunner
57 +* Obtain the keypad address by querying the devices on the NETBRIDGE:
58 +##sr zummesh show devices [Gateway IP-ID in hex] [NETBRIDGE RF-ID in hex]##
59 +Example: ##sr zummesh show devices B0 1A##
60 +[[image:1626996842264-632.png]]
61 +* Setup the keypad buttons that will report to ShowRunner™:
62 +##sr zummesh keypad custom buttons [Gateway IP-ID] [NETBRIDGE RF-ID] [Keypad Address] [Keypad Id] [List of Buttons to Override Local Logic, comma/dash separated list]##
63 +Example: ##sr zummesh keypad custom buttons B0 1A 52E5 1 1-6##
64 +[[image:1626997279912-938.png]]
65 +
66 +==== Manual Setup: ====
67 +
68 +Use this setup method if you wish to assign specific ShowRunner™ button IDs to ZUMMESH-KPs or selective send buttons to ShowRunner™
69 +
70 +* Connect to RF Gateway console
71 +* ##RFRCON [NETBRIDGE RF-ID] DISPLAYDEVICES## to obtain the Addr of the Keypad
72 +[[image:1626997350133-604.png]]
73 +* Calculate Button IDs:
74 +Keypad IDs are 1 to 255
75 +Button Numbers are 1 to 6
76 +Tap Action is 0
77 +Hold Action is 1
78 +Release Action is 2
79 +ExportId = (Keypad ID << 8) + (Button Number << 4) + ButtonAction
80 +Example for keypad id of 2 button 2 w/ hold action
81 +##(2 << 8) + (2 << 4) + 1 = 545 or 221h##
82 +Example for keypad id of 128 button 5 w/ tap action
83 +##(128 << 8) + (5 << 4) + 0 = 32848 or 8050h##
84 +* Send command per button to enable reporting:
85 +##rfrcon [NETBRIDGE-RFID] setbuttfunc [KEYPAD ADDRESS] [ButtonNumber] 22 [Tap-ExportID in hex] [Hold-ExportID in hex] [Release-ExportID in hex]
86 +rfrcon 03 setbuttfunc 52E5 2 22 220 221 222##
87 +[[image:1626997728072-241.png]]
1626997350133-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +67.1 KB
Content
1626997728072-241.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +5.7 KB
Content