Skip to Content
Last modified by Austin Weygandt on 2025/04/18 15:47
From version 2.1
edited by Mark Kohlmann
on 2021/07/22 23:32
Change comment: Uploaded new attachment "ZUMMESH-KP Buttons.png", version {1}
To version 12.1
edited by Mark Kohlmann
on 2024/04/05 19:46
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ User Guide & Wiki.Troubleshooting.WebHome
1 +SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.WebHome
Content
... ... @@ -1,1 +1,92 @@
1 -ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  AV keypads have not been verified for support yet, this only applies to regular lighting keypads.  Overriding buttons is done on per button basis.
1 +(% class="box warningmessage" %)
2 +(((
3 +Buttons 5 and 6 presently cannot be exposed to ShowRunnerCLC™ and will only work locally.  ZUMMESH-KPAV type keypads are not supported with this approach and require an AVBRIDGE.
4 +)))
5 +
6 +ShowRunnerCLC™ supports receiving button presses from ZUMMESH-KP* keypads.  Overriding buttons is done on a per button basis.
7 +
8 +Requirements:
9 +
10 +* JBOX w/ NETBRIDGE
11 +* ZUMMESH Firmware v1.07.016 or newer
12 +** NETBRIDGE firmware v1.013.0021
13 +** ZUM-KPBATT firmware v0010000113
14 +** ZUM-JBOX-SIM firmware v0010000067
15 +* NETBRIDGE defined in ShowRunner as a load controller
16 +* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads are not supported due to lack of firmware support)
17 +* ShowRunner™ 3.004 or newer
18 +
19 +Keypads have 6 buttons, 1 through 4 can be exported individually, 5 and 6 are supported by ShowRunner but not Crestron:
20 +[[image:ZUMMESH-KP Buttons.png]]
21 +
22 +
23 +JBOX-SIM is supported. O is button 1, V is button 2, and P is button 3.
24 +
25 +
26 +Keypad definition in ShowRunner config:
27 +
28 +##//**DeviceConnectionId**//## is the KeypadId used to uniquely identify the ZUMMESH-KP.  This must be between 1 and 255.
29 +##//**DeviceHostId**// ##is the IP-ID of the RF Gateway that owns the NETBRIDGE
30 +##//**DeviceHostBranch**// ##is the RF-ID of the NETBRIDGE on the gateway
31 +##//**Model**// ##may be the actual keypad model excluding the color and finish.  Example ZUMMESH-KP10GBATT-GRY-S is "ZUMMESH-KP10GBATT".  "ZUMMESH-KP" or "ZUMMESH-KPBATT" may also be used.
32 +
33 +## "7": {
34 + "AreaId": 2,
35 + "LinkedAreaIds": null,
36 + "Id": 7,
37 + "Name": "Zummesh KP",
38 +**~ "//DeviceConnectionId//": "1",**
39 +**~ "//DeviceHostId//": "B0",**
40 +**~ "//DeviceHostBranch//": 5,**
41 + "SerialNumber": "",
42 + "DisableOff": false,
43 + "DisallowDisable": false,
44 + "FlipRaiseLower": false,
45 + "MasterRaiseButtonIndex": 0,
46 + "MasterLowerButtonIndex": 0,
47 + "HoldTime": 0.5,
48 + "DoubleTapTime": 0.5,
49 + "//**Model**//": "ZUMMESH-KPBATT",
50 + "Enabled": true,
51 + "KeypadType": "A",
52 + "ControllerIds": [],
53 + "DirectLoadIds": null,
54 + "Actions": null,
55 + }##
56 +
57 +==== Automatic Setup: ====
58 +
59 +This method will automatically enable all buttons to report to ShowRunnerCLC™
60 +
61 +* Console to ShowRunnerCLC™
62 +* Obtain the keypad address by querying the devices on the NETBRIDGE:
63 +##sr zummesh show devices [Gateway IP-ID in hex] [NETBRIDGE RF-ID in hex]##
64 +Example: ##sr zummesh show devices B0 1A##
65 +[[image:1626996842264-632.png]]
66 +* Setup the keypad buttons that will report to ShowRunnerCLC™:
67 +##sr zummesh keypad custom buttons [Gateway IP-ID] [NETBRIDGE RF-ID] [Keypad Address] [Keypad Id] [List of Buttons to Override Local Logic, comma/dash separated list]##
68 +Example: ##sr zummesh keypad custom buttons B0 1A 52E5 1 1-6##
69 +[[image:1626997279912-938.png]]
70 +
71 +==== Manual Setup: ====
72 +
73 +Use this setup method if you wish to assign specific ShowRunnerCLC™ button IDs to ZUMMESH-KPs or selective send buttons to ShowRunnerCLC™
74 +
75 +* Connect to RF Gateway console
76 +* ##RFRCON [NETBRIDGE RF-ID] DISPLAYDEVICES## to obtain the Addr of the Keypad
77 +[[image:1626997350133-604.png]]
78 +* Calculate Button IDs:
79 +Keypad IDs are 1 to 255
80 +Button Numbers are 1 to 6
81 +Tap Action is 0
82 +Hold Action is 1
83 +Release Action is 2
84 +ExportId = (Keypad ID << 8) + (Button Number << 4) + ButtonAction
85 +Example for keypad id of 2 button 2 w/ hold action
86 +##(2 << 8) + (2 << 4) + 1 = 545 or 221h##
87 +Example for keypad id of 128 button 5 w/ tap action
88 +##(128 << 8) + (5 << 4) + 0 = 32848 or 8050h##
89 +* Send command per button to enable reporting:
90 +##rfrcon [NETBRIDGE-RFID] setbuttfunc [KEYPAD ADDRESS] [ButtonNumber] 22 [Tap-ExportID in hex] [Hold-ExportID in hex] [Release-ExportID in hex]
91 +rfrcon 03 setbuttfunc 52E5 2 22 220 221 222##
92 +[[image:1626997728072-241.png]]
1626996842264-632.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +64.2 KB
Content
1626997279912-938.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +5.2 KB
Content
1626997350133-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +67.1 KB
Content
1626997728072-241.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +5.7 KB
Content