Skip to Content
Last modified by Austin Weygandt on 2025/04/18 15:47
From version 14.1
edited by Austin Weygandt
on 2025/04/18 15:47
Change comment: There is no comment for this version
To version 12.1
edited by Mark Kohlmann
on 2024/04/05 19:46
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.austin\.weygandt@chiefintegrations\.com
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Content
... ... @@ -3,15 +3,6 @@
3 3  Buttons 5 and 6 presently cannot be exposed to ShowRunnerCLC™ and will only work locally.  ZUMMESH-KPAV type keypads are not supported with this approach and require an AVBRIDGE.
4 4  )))
5 5  
6 -{{error}}
7 - FIRMWARE REQUIREMENTS:
8 -
9 -* ZUMMESH Firmware v1.07.016 or newer
10 -** NETBRIDGE firmware v1.013.0021
11 -** ZUM-KPBATT firmware v1.000.0113
12 -** ZUM-JBOX-SIM firmware v1.000.067
13 -{{/error}}
14 -
15 15  ShowRunnerCLC™ supports receiving button presses from ZUMMESH-KP* keypads.  Overriding buttons is done on a per button basis.
16 16  
17 17  Requirements:
... ... @@ -19,8 +19,8 @@
19 19  * JBOX w/ NETBRIDGE
20 20  * ZUMMESH Firmware v1.07.016 or newer
21 21  ** NETBRIDGE firmware v1.013.0021
22 -** ZUM-KPBATT firmware v1.000.0113
23 -** ZUM-JBOX-SIM firmware v1.000.067
13 +** ZUM-KPBATT firmware v0010000113
14 +** ZUM-JBOX-SIM firmware v0010000067
24 24  * NETBRIDGE defined in ShowRunner as a load controller
25 25  * ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads are not supported due to lack of firmware support)
26 26  * ShowRunner™ 3.004 or newer
... ... @@ -29,7 +29,7 @@
29 29  [[image:ZUMMESH-KP Buttons.png]]
30 30  
31 31  
32 -JBOX-SIM is supported. O is button 1, V is button 2, and D is button 3.
23 +JBOX-SIM is supported. O is button 1, V is button 2, and P is button 3.
33 33  
34 34  
35 35  Keypad definition in ShowRunner config: