Skip to Content
Last modified by Austin Weygandt on 2025/04/18 15:47
From version 13.1
edited by Mark Kohlmann
on 2024/04/05 19:48
Change comment: There is no comment for this version
To version 14.1
edited by Austin Weygandt
on 2025/04/18 15:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
1 +XWiki.austin\.weygandt@chiefintegrations\.com
Content
... ... @@ -3,6 +3,15 @@
3 3  Buttons 5 and 6 presently cannot be exposed to ShowRunnerCLC™ and will only work locally.  ZUMMESH-KPAV type keypads are not supported with this approach and require an AVBRIDGE.
4 4  )))
5 5  
6 +{{error}}
7 + FIRMWARE REQUIREMENTS:
8 +
9 +* ZUMMESH Firmware v1.07.016 or newer
10 +** NETBRIDGE firmware v1.013.0021
11 +** ZUM-KPBATT firmware v1.000.0113
12 +** ZUM-JBOX-SIM firmware v1.000.067
13 +{{/error}}
14 +
6 6  ShowRunnerCLC™ supports receiving button presses from ZUMMESH-KP* keypads.  Overriding buttons is done on a per button basis.
7 7  
8 8  Requirements:
... ... @@ -10,8 +10,8 @@
10 10  * JBOX w/ NETBRIDGE
11 11  * ZUMMESH Firmware v1.07.016 or newer
12 12  ** NETBRIDGE firmware v1.013.0021
13 -** ZUM-KPBATT firmware v0010000113
14 -** ZUM-JBOX-SIM firmware v0010000067
22 +** ZUM-KPBATT firmware v1.000.0113
23 +** ZUM-JBOX-SIM firmware v1.000.067
15 15  * NETBRIDGE defined in ShowRunner as a load controller
16 16  * ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads are not supported due to lack of firmware support)
17 17  * ShowRunner™ 3.004 or newer