Skip to Content
Last modified by Austin Weygandt on 2025/04/18 15:47
From version 12.1
edited by Mark Kohlmann
on 2024/04/05 19:46
Change comment: There is no comment for this version
To version 2.1
edited by Mark Kohlmann
on 2021/07/22 23:32
Change comment: Uploaded new attachment "ZUMMESH-KP Buttons.png", version {1}

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.WebHome
1 +SHOWRUNNER™ User Guide & Wiki.Troubleshooting.WebHome
Content
... ... @@ -1,92 +1,1 @@
1 -(% class="box warningmessage" %)
2 -(((
3 -Buttons 5 and 6 presently cannot be exposed to ShowRunnerCLC™ and will only work locally.  ZUMMESH-KPAV type keypads are not supported with this approach and require an AVBRIDGE.
4 -)))
5 -
6 -ShowRunnerCLC™ supports receiving button presses from ZUMMESH-KP* keypads.  Overriding buttons is done on a per button basis.
7 -
8 -Requirements:
9 -
10 -* JBOX w/ NETBRIDGE
11 -* ZUMMESH Firmware v1.07.016 or newer
12 -** NETBRIDGE firmware v1.013.0021
13 -** ZUM-KPBATT firmware v0010000113
14 -** ZUM-JBOX-SIM firmware v0010000067
15 -* NETBRIDGE defined in ShowRunner as a load controller
16 -* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads are not supported due to lack of firmware support)
17 -* ShowRunner™ 3.004 or newer
18 -
19 -Keypads have 6 buttons, 1 through 4 can be exported individually, 5 and 6 are supported by ShowRunner but not Crestron:
20 -[[image:ZUMMESH-KP Buttons.png]]
21 -
22 -
23 -JBOX-SIM is supported. O is button 1, V is button 2, and P is button 3.
24 -
25 -
26 -Keypad definition in ShowRunner config:
27 -
28 -##//**DeviceConnectionId**//## is the KeypadId used to uniquely identify the ZUMMESH-KP.  This must be between 1 and 255.
29 -##//**DeviceHostId**// ##is the IP-ID of the RF Gateway that owns the NETBRIDGE
30 -##//**DeviceHostBranch**// ##is the RF-ID of the NETBRIDGE on the gateway
31 -##//**Model**// ##may be the actual keypad model excluding the color and finish.  Example ZUMMESH-KP10GBATT-GRY-S is "ZUMMESH-KP10GBATT".  "ZUMMESH-KP" or "ZUMMESH-KPBATT" may also be used.
32 -
33 -## "7": {
34 - "AreaId": 2,
35 - "LinkedAreaIds": null,
36 - "Id": 7,
37 - "Name": "Zummesh KP",
38 -**~ "//DeviceConnectionId//": "1",**
39 -**~ "//DeviceHostId//": "B0",**
40 -**~ "//DeviceHostBranch//": 5,**
41 - "SerialNumber": "",
42 - "DisableOff": false,
43 - "DisallowDisable": false,
44 - "FlipRaiseLower": false,
45 - "MasterRaiseButtonIndex": 0,
46 - "MasterLowerButtonIndex": 0,
47 - "HoldTime": 0.5,
48 - "DoubleTapTime": 0.5,
49 - "//**Model**//": "ZUMMESH-KPBATT",
50 - "Enabled": true,
51 - "KeypadType": "A",
52 - "ControllerIds": [],
53 - "DirectLoadIds": null,
54 - "Actions": null,
55 - }##
56 -
57 -==== Automatic Setup: ====
58 -
59 -This method will automatically enable all buttons to report to ShowRunnerCLC™
60 -
61 -* Console to ShowRunnerCLC™
62 -* Obtain the keypad address by querying the devices on the NETBRIDGE:
63 -##sr zummesh show devices [Gateway IP-ID in hex] [NETBRIDGE RF-ID in hex]##
64 -Example: ##sr zummesh show devices B0 1A##
65 -[[image:1626996842264-632.png]]
66 -* Setup the keypad buttons that will report to ShowRunnerCLC™:
67 -##sr zummesh keypad custom buttons [Gateway IP-ID] [NETBRIDGE RF-ID] [Keypad Address] [Keypad Id] [List of Buttons to Override Local Logic, comma/dash separated list]##
68 -Example: ##sr zummesh keypad custom buttons B0 1A 52E5 1 1-6##
69 -[[image:1626997279912-938.png]]
70 -
71 -==== Manual Setup: ====
72 -
73 -Use this setup method if you wish to assign specific ShowRunnerCLC™ button IDs to ZUMMESH-KPs or selective send buttons to ShowRunnerCLC™
74 -
75 -* Connect to RF Gateway console
76 -* ##RFRCON [NETBRIDGE RF-ID] DISPLAYDEVICES## to obtain the Addr of the Keypad
77 -[[image:1626997350133-604.png]]
78 -* Calculate Button IDs:
79 -Keypad IDs are 1 to 255
80 -Button Numbers are 1 to 6
81 -Tap Action is 0
82 -Hold Action is 1
83 -Release Action is 2
84 -ExportId = (Keypad ID << 8) + (Button Number << 4) + ButtonAction
85 -Example for keypad id of 2 button 2 w/ hold action
86 -##(2 << 8) + (2 << 4) + 1 = 545 or 221h##
87 -Example for keypad id of 128 button 5 w/ tap action
88 -##(128 << 8) + (5 << 4) + 0 = 32848 or 8050h##
89 -* Send command per button to enable reporting:
90 -##rfrcon [NETBRIDGE-RFID] setbuttfunc [KEYPAD ADDRESS] [ButtonNumber] 22 [Tap-ExportID in hex] [Hold-ExportID in hex] [Release-ExportID in hex]
91 -rfrcon 03 setbuttfunc 52E5 2 22 220 221 222##
92 -[[image:1626997728072-241.png]]
1 +ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  AV keypads have not been verified for support yet, this only applies to regular lighting keypads.  Overriding buttons is done on per button basis.
1626996842264-632.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -64.2 KB
Content
1626997279912-938.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -5.2 KB
Content
1626997350133-604.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -67.1 KB
Content
1626997728072-241.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -5.7 KB
Content