Skip to Content
Last modified by Austin Weygandt on 2025/04/18 15:47
From version 11.1
edited by Scott Kohlmann
on 2023/04/21 14:10
Change comment: There is no comment for this version
To version 14.1
edited by Austin Weygandt
on 2025/04/18 15:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.scott\.kohlmann@chiefintegrations\.com
1 +XWiki.austin\.weygandt@chiefintegrations\.com
Content
... ... @@ -3,6 +3,15 @@
3 3  Buttons 5 and 6 presently cannot be exposed to ShowRunnerCLC™ and will only work locally.  ZUMMESH-KPAV type keypads are not supported with this approach and require an AVBRIDGE.
4 4  )))
5 5  
6 +{{error}}
7 + FIRMWARE REQUIREMENTS:
8 +
9 +* ZUMMESH Firmware v1.07.016 or newer
10 +** NETBRIDGE firmware v1.013.0021
11 +** ZUM-KPBATT firmware v1.000.0113
12 +** ZUM-JBOX-SIM firmware v1.000.067
13 +{{/error}}
14 +
6 6  ShowRunnerCLC™ supports receiving button presses from ZUMMESH-KP* keypads.  Overriding buttons is done on a per button basis.
7 7  
8 8  Requirements:
... ... @@ -10,7 +10,8 @@
10 10  * JBOX w/ NETBRIDGE
11 11  * ZUMMESH Firmware v1.07.016 or newer
12 12  ** NETBRIDGE firmware v1.013.0021
13 -** ZUM-KPBATT firmware v0010000113
22 +** ZUM-KPBATT firmware v1.000.0113
23 +** ZUM-JBOX-SIM firmware v1.000.067
14 14  * NETBRIDGE defined in ShowRunner as a load controller
15 15  * ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads are not supported due to lack of firmware support)
16 16  * ShowRunner™ 3.004 or newer
... ... @@ -18,6 +18,10 @@
18 18  Keypads have 6 buttons, 1 through 4 can be exported individually, 5 and 6 are supported by ShowRunner but not Crestron:
19 19  [[image:ZUMMESH-KP Buttons.png]]
20 20  
31 +
32 +JBOX-SIM is supported. O is button 1, V is button 2, and D is button 3.
33 +
34 +
21 21  Keypad definition in ShowRunner config:
22 22  
23 23  ##//**DeviceConnectionId**//## is the KeypadId used to uniquely identify the ZUMMESH-KP.  This must be between 1 and 255.