Skip to Content
Last modified by Mark Kohlmann on 2024/04/05 19:48
From version 11.1
edited by Scott Kohlmann
on 2023/04/21 14:10
Change comment: There is no comment for this version
To version 12.1
edited by Mark Kohlmann
on 2024/04/05 19:46
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.scott\.kohlmann@chiefintegrations\.com
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Content
... ... @@ -11,6 +11,7 @@
11 11  * ZUMMESH Firmware v1.07.016 or newer
12 12  ** NETBRIDGE firmware v1.013.0021
13 13  ** ZUM-KPBATT firmware v0010000113
14 +** ZUM-JBOX-SIM firmware v0010000067
14 14  * NETBRIDGE defined in ShowRunner as a load controller
15 15  * ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads are not supported due to lack of firmware support)
16 16  * ShowRunner™ 3.004 or newer
... ... @@ -18,6 +18,10 @@
18 18  Keypads have 6 buttons, 1 through 4 can be exported individually, 5 and 6 are supported by ShowRunner but not Crestron:
19 19  [[image:ZUMMESH-KP Buttons.png]]
20 20  
22 +
23 +JBOX-SIM is supported. O is button 1, V is button 2, and P is button 3.
24 +
25 +
21 21  Keypad definition in ShowRunner config:
22 22  
23 23  ##//**DeviceConnectionId**//## is the KeypadId used to uniquely identify the ZUMMESH-KP.  This must be between 1 and 255.