Skip to Content
Last modified by Mark Kohlmann on 2024/04/05 19:48
From version 10.6
edited by Mark Kohlmann
on 2022/09/19 18:28
Change comment: Renamed from xwiki:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Software and Programming.Troubleshooting.Zummesh Keypad Custom Programming.WebHome
To version 11.1
edited by Scott Kohlmann
on 2023/04/21 14:10
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -xwiki:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.WebHome
1 +SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.WebHome
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
1 +XWiki.scott\.kohlmann@chiefintegrations\.com
Content
... ... @@ -1,9 +1,9 @@
1 1  (% class="box warningmessage" %)
2 2  (((
3 -Buttons 5 and 6 presently cannot be exposed to ShowRunner and will only work locally.  ZUMMESH-KPAV type keypads are not supported with this approach and require an AVBRIDGE.
3 +Buttons 5 and 6 presently cannot be exposed to ShowRunnerCLC™ and will only work locally.  ZUMMESH-KPAV type keypads are not supported with this approach and require an AVBRIDGE.
4 4  )))
5 5  
6 -ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  Overriding buttons is done on a per button basis.
6 +ShowRunnerCLC™ supports receiving button presses from ZUMMESH-KP* keypads.  Overriding buttons is done on a per button basis.
7 7  
8 8  Requirements:
9 9  
... ... @@ -51,14 +51,14 @@
51 51  
52 52  ==== Automatic Setup: ====
53 53  
54 -This method will automatically enable all buttons to report to ShowRunner™
54 +This method will automatically enable all buttons to report to ShowRunnerCLC™
55 55  
56 -* Console to ShowRunner
56 +* Console to ShowRunnerCLC™
57 57  * Obtain the keypad address by querying the devices on the NETBRIDGE:
58 58  ##sr zummesh show devices [Gateway IP-ID in hex] [NETBRIDGE RF-ID in hex]##
59 59  Example: ##sr zummesh show devices B0 1A##
60 60  [[image:1626996842264-632.png]]
61 -* Setup the keypad buttons that will report to ShowRunner™:
61 +* Setup the keypad buttons that will report to ShowRunnerCLC™:
62 62  ##sr zummesh keypad custom buttons [Gateway IP-ID] [NETBRIDGE RF-ID] [Keypad Address] [Keypad Id] [List of Buttons to Override Local Logic, comma/dash separated list]##
63 63  Example: ##sr zummesh keypad custom buttons B0 1A 52E5 1 1-6##
64 64  [[image:1626997279912-938.png]]
... ... @@ -65,7 +65,7 @@
65 65  
66 66  ==== Manual Setup: ====
67 67  
68 -Use this setup method if you wish to assign specific ShowRunner™ button IDs to ZUMMESH-KPs or selective send buttons to ShowRunner™
68 +Use this setup method if you wish to assign specific ShowRunnerCLC™ button IDs to ZUMMESH-KPs or selective send buttons to ShowRunnerCLC™
69 69  
70 70  * Connect to RF Gateway console
71 71  * ##RFRCON [NETBRIDGE RF-ID] DISPLAYDEVICES## to obtain the Addr of the Keypad