Skip to Content
Last modified by Austin Weygandt on 2025/04/18 15:47
From version 10.3
edited by Mark Kohlmann
on 2022/09/19 17:02
Change comment: Renamed from xwiki:SHOWRUNNER™ User Guide & Wiki.Troubleshooting.Zummesh Keypad Custom Programming.WebHome
To version 8.1
edited by Mark Kohlmann
on 2021/07/23 03:30
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -xwiki:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Software and Programming.Troubleshooting.WebHome
1 +SHOWRUNNER™ User Guide & Wiki.Troubleshooting.WebHome
Content
... ... @@ -9,10 +9,8 @@
9 9  
10 10  * JBOX w/ NETBRIDGE
11 11  * ZUMMESH Firmware v1.07.016 or newer
12 -** NETBRIDGE firmware v1.013.0021
13 -** ZUM-KPBATT firmware v0010000113
14 14  * NETBRIDGE defined in ShowRunner as a load controller
15 -* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads are not supported due to lack of firmware support)
13 +* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads pending verification of support)
16 16  * ShowRunner™ 3.004 or newer
17 17  
18 18  Keypads have 6 buttons, 1 through 4 can be exported individually, 5 and 6 are supported by ShowRunner but not Crestron: