Skip to Content
Last modified by Austin Weygandt on 2025/04/18 15:47
From version 10.1
edited by Mark Kohlmann
on 2021/08/20 22:19
Change comment: There is no comment for this version
To version 5.1
edited by Mark Kohlmann
on 2021/07/22 23:42
Change comment: Uploaded new attachment "1626997350133-604.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,87 +1,1 @@
1 -(% class="box warningmessage" %)
2 -(((
3 -Buttons 5 and 6 presently cannot be exposed to ShowRunner and will only work locally.  ZUMMESH-KPAV type keypads are not supported with this approach and require an AVBRIDGE.
4 -)))
5 -
6 -ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  Overriding buttons is done on a per button basis.
7 -
8 -Requirements:
9 -
10 -* JBOX w/ NETBRIDGE
11 -* ZUMMESH Firmware v1.07.016 or newer
12 -** NETBRIDGE firmware v1.013.0021
13 -** ZUM-KPBATT firmware v0010000113
14 -* NETBRIDGE defined in ShowRunner as a load controller
15 -* ZUMMESH-KP or ZUMMESH-KPBATT (Excludes ZUMMESH-KPAV series keypads are not supported due to lack of firmware support)
16 -* ShowRunner™ 3.004 or newer
17 -
18 -Keypads have 6 buttons, 1 through 4 can be exported individually, 5 and 6 are supported by ShowRunner but not Crestron:
19 -[[image:ZUMMESH-KP Buttons.png]]
20 -
21 -Keypad definition in ShowRunner config:
22 -
23 -##//**DeviceConnectionId**//## is the KeypadId used to uniquely identify the ZUMMESH-KP.  This must be between 1 and 255.
24 -##//**DeviceHostId**// ##is the IP-ID of the RF Gateway that owns the NETBRIDGE
25 -##//**DeviceHostBranch**// ##is the RF-ID of the NETBRIDGE on the gateway
26 -##//**Model**// ##may be the actual keypad model excluding the color and finish.  Example ZUMMESH-KP10GBATT-GRY-S is "ZUMMESH-KP10GBATT".  "ZUMMESH-KP" or "ZUMMESH-KPBATT" may also be used.
27 -
28 -## "7": {
29 - "AreaId": 2,
30 - "LinkedAreaIds": null,
31 - "Id": 7,
32 - "Name": "Zummesh KP",
33 -**~ "//DeviceConnectionId//": "1",**
34 -**~ "//DeviceHostId//": "B0",**
35 -**~ "//DeviceHostBranch//": 5,**
36 - "SerialNumber": "",
37 - "DisableOff": false,
38 - "DisallowDisable": false,
39 - "FlipRaiseLower": false,
40 - "MasterRaiseButtonIndex": 0,
41 - "MasterLowerButtonIndex": 0,
42 - "HoldTime": 0.5,
43 - "DoubleTapTime": 0.5,
44 - "//**Model**//": "ZUMMESH-KPBATT",
45 - "Enabled": true,
46 - "KeypadType": "A",
47 - "ControllerIds": [],
48 - "DirectLoadIds": null,
49 - "Actions": null,
50 - }##
51 -
52 -==== Automatic Setup: ====
53 -
54 -This method will automatically enable all buttons to report to ShowRunner™
55 -
56 -* Console to ShowRunner
57 -* Obtain the keypad address by querying the devices on the NETBRIDGE:
58 -##sr zummesh show devices [Gateway IP-ID in hex] [NETBRIDGE RF-ID in hex]##
59 -Example: ##sr zummesh show devices B0 1A##
60 -[[image:1626996842264-632.png]]
61 -* Setup the keypad buttons that will report to ShowRunner™:
62 -##sr zummesh keypad custom buttons [Gateway IP-ID] [NETBRIDGE RF-ID] [Keypad Address] [Keypad Id] [List of Buttons to Override Local Logic, comma/dash separated list]##
63 -Example: ##sr zummesh keypad custom buttons B0 1A 52E5 1 1-6##
64 -[[image:1626997279912-938.png]]
65 -
66 -==== Manual Setup: ====
67 -
68 -Use this setup method if you wish to assign specific ShowRunner™ button IDs to ZUMMESH-KPs or selective send buttons to ShowRunner™
69 -
70 -* Connect to RF Gateway console
71 -* ##RFRCON [NETBRIDGE RF-ID] DISPLAYDEVICES## to obtain the Addr of the Keypad
72 -[[image:1626997350133-604.png]]
73 -* Calculate Button IDs:
74 -Keypad IDs are 1 to 255
75 -Button Numbers are 1 to 6
76 -Tap Action is 0
77 -Hold Action is 1
78 -Release Action is 2
79 -ExportId = (Keypad ID << 8) + (Button Number << 4) + ButtonAction
80 -Example for keypad id of 2 button 2 w/ hold action
81 -##(2 << 8) + (2 << 4) + 1 = 545 or 221h##
82 -Example for keypad id of 128 button 5 w/ tap action
83 -##(128 << 8) + (5 << 4) + 0 = 32848 or 8050h##
84 -* Send command per button to enable reporting:
85 -##rfrcon [NETBRIDGE-RFID] setbuttfunc [KEYPAD ADDRESS] [ButtonNumber] 22 [Tap-ExportID in hex] [Hold-ExportID in hex] [Release-ExportID in hex]
86 -rfrcon 03 setbuttfunc 52E5 2 22 220 221 222##
87 -[[image:1626997728072-241.png]]
1 +ShowRunner™ supports receiving button presses from ZUMMESH-KP* keypads.  AV keypads have not been verified for support yet, this only applies to regular lighting keypads.  Overriding buttons is done on per button basis.
1626997728072-241.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -5.7 KB
Content