Zummesh Dynamic White/CCT

Caveats:

* Only intensity/CCT fixtures are supported. This will not work with warm/cool fixtures.

* NETBRIDGE must be attached to the ZUMMESH-JBOX-DALI. Only 1 ZUMMESH-JBOX-DALI is supported per room. Use Zum Wired or DIN-DALI-2/DIN-DLI if more capabilities are needed.

6

* Supports up to 8 CCT channels, DALI Groups 2,4,6,8,10,12,14,16 on the Zum app (0 based - 1,3,5,7,9,11,13,15 for ShowRunner/console purposes)

7

* Zum Scene must have the CCT channel set to 255 to accept input from ShowRunner. Values of 0-254 will be sent directly to the group as fixed colors.

8

* Setup must be done from the gateway console

9

* **Loads must be manually changed to BusIndex 3 in the ShowRunner config or added from the UI with BusIndex 3. Normally DALI loads are BusIndex 2.**

10

11

12

Zum wireless supports dynamic white using DALI Groups 2,4,6,8,10,12,14,16 (1,3,5,7,9,11,13,15 for ShowRunner/console purposes). Setup must be performed manually on the NETBRIDGE. Once done, ShowRunner can use the CCT channels to provide CCT data to the fixtures. Input from ShowRunnerCLC™ requires setting the scene recall for the CCT group to 255. Any value of 0-254 will be sent to the CCT channel directly and the input from ShowRunnerCLC™ will be ignored.

13

14

==== Typical Setup for up to 6 zones, 5 fixture types: ====

15

16

(% border="1" style="width:600px" %)

17

|=DALI Group|=Name|=Fixture Type|=Control Type

18

|0|Downlights, Main|F0|Intensity

19

|1|Downlights, Main/Screen CCT|F0|Color

20

|2|Accent Lights|F1a|Intensity

21

|3|Accent Lights CCT|F1a|Color

22

|4|Spot Lights|F3|Intensity

23

|5|Spot Lights CCT|F3|Color

24

|6|Troffers|F4c|Intensity

25

|7|Troffers CCT|F4c|Color

26

|8|Linear|F9|Intensity

27

|9|Linear|F9|Color

28

|10|Downlights @ Screen|F0|Intensity

|11|-|-|Color

|12|-|-|Intensity

|13|-|-|Color

|14|-|-|Intensity

|15|-|-|Color

==== Setup Steps: ====

36

37

38

If your DALI groups are already commissioned and you need to specify the groups for color (Examples shown for group 7):

39

40

1. Modify DALI Group to color, only needed if step 2 was not done. If step 2 was performed skip this step.

41

##Command: //rfrcon <**NetbridgeID**> DALIGROUPSETTWRITE <**GroupID**> 14 <**GroupType**>//

42

**GroupID: **0 to 15

43

**GroupType:** 0=Intensity, 1=Color

44

Example: (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPSETTWRITE 7 14 1//##

45

1. Set Scene settings for Color Support. Enables or uses a fixed value for color temperature on color groups. This must be done for all scenes that will be used.

46

##Command: rfrcon <**NetbridgeID**> DALIGROUPCOMMAND 4 <**GroupID**> <**SceneID**> <**SceneLevel**> <**Action**> <**FadeTime**>

47

**GroupID**: 0 to 15 (odd for color)

48

**SceneID**: Scene number (1 to 16)

49

**SceneLevel**: 255 for ShowRunner control, 0-254 for fixed scene level

50

**Action**: 0=Remove Scene, 1=Add Scene

51

**FadeTime**: Fade time in 1/10th of a second

52

Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 7 1 255 1 10//

53

Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 7 2 255 1 10//##

54

55

56

If Starting from scratch without having been commissioned in the Zum App (Examples shown for group 7):

57

58

1. (((

59

Address all DALI drivers attached to the JBOX. This can be done via the gateway console or via the Zum app on iOS/Android.

60

##Command: //rfrcon <**NetbridgeID**> DALIGLOBALADDRESS <**Action**>//

61

**Action**: 0=stop, 1=start, 3=get status

62

Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGLOBALADDRESS 1//##

63

)))

64

1. Create DALI Groups. If group already exists then go to step 3. This must be done from the gateway console.

65

##Command: //rfrcon <**NetbridgeID**> DALIGROUPADDDELETE <**GroupID**> <**Operation**> <**GroupName**>//

66

**GroupID: **0 to 15

67

**Operation:** 0=Delete Group, 1=Add Intensity Group, 3=Add Color Group

68

**GroupName: **Name of the group, no spaces, 16 characters max

69

Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPADDDELETE 7 3 TypeF1-Color//##

70