Skip to Content

Zummesh Dynamic White/CCT

Version 1.2 by Mark Kohlmann on 2021/09/07 17:42

Zum wireless supports dynamic white using DALI Groups 9-16.  Setup must be performed manually on the NETBRIDGE.  Once done, ShowRunner can use the CCT channels to provide CCT data to the fixtures.  Input from ShowRunner requires setting the scene recall for the CCT group to 255.  Any value of 0-254 will be sent to the CCT channel directly and the input from ShowRunner will be ignored.

Caveats:

  • Only intensity/CCT fixtures are supported.  This will not work with warm/cool fixtures.
  • NETBRIDGE must be attached to the ZUMMESH-JOBX-DALI.  Only 1 ZUMMESH-JBOX-DALI is supported per room.  Use Zum Wired or DIN-DALI-2 if more capabilities are needed.
  • Supports up to 8 CCT channels, DALI Groups 9-16
  • Zum Scene must have the CCT channel set to 255 to accept input from ShowRunner.  Values of 0-254 will be sent directly to the group as fixed colors.
  • Setup must be done from the gateway console

Setup Steps:

  1. Address all DALI drivers attached to the JBOX.  This can be done via the gateway console or via the Zum app on iOS/Android.
    Command: rfrcon <NetbridgeID> DALIGLOBALADDRESS <Action>
    Action: 0=stop, 1=start, 3=get status
    Example (NETBRIDGE RF-ID 1A): rfrcon 1A DALIGLOBALADDRESS 1
  2. Create DALI Groups.  This must be done from the gateway console.
    Command: rfrcon <NetbridgeID> DALIGROUPADDDELETE <GroupID> <Operation> <GroupName>
    GroupID: 0 to 15
    Operation: 0=Delete Group, 1=Add Intensity Group, 3=Add Color Group
    GroupName: Name of the group, no spaces
  3.