Skip to Content

Changes for page Zummesh Dynamic White/CCT

Last modified by Austin Weygandt on 2025/10/09 15:46
From version 9.3
edited by Craig Lewis
on 2022/09/19 17:02
Change comment: Update document after refactoring.
To version 11.1
edited by Austin Weygandt
on 2025/10/09 15:46
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Software and Programming.Troubleshooting.WebHome
1 +SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.WebHome
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.craig\.lewis@chiefintegrations\.com
1 +XWiki.austin\.weygandt@chiefintegrations\.com
Content
... ... @@ -1,5 +1,16 @@
1 -Zum wireless supports dynamic white using DALI Groups 2,4,6,8,10,12,14,16 (1,3,5,7,9,11,13,15 for console purposes).  Setup must be performed manually on the NETBRIDGE.  Once done, ShowRunner can use the CCT channels to provide CCT data to the fixtures.  Input from ShowRunner requires setting the scene recall for the CCT group to 255.  Any value of 0-254 will be sent to the CCT channel directly and the input from ShowRunner will be ignored.
1 +{{warning}}
2 +Caveats:
2 2  
4 +* Only intensity/CCT fixtures are supported.  This will not work with warm/cool fixtures.
5 +* NETBRIDGE must be attached to the ZUMMESH-JBOX-DALI.  Only 1 ZUMMESH-JBOX-DALI is supported per room.  Use Zum Wired or DIN-DALI-2 if more capabilities are needed.
6 +* Supports up to 8 CCT channels, DALI Groups 2,4,6,8,10,12,14,16 (1,3,5,7,9,11,13,15 for console purposes)
7 +* Zum Scene must have the CCT channel set to 255 to accept input from ShowRunner.  Values of 0-254 will be sent directly to the group as fixed colors.
8 +* Setup must be done from the gateway console
9 +* Loads must be manually changed to BusIndex 3 in the config
10 +{{/warning}}
11 +
12 +Zum wireless supports dynamic white using DALI Groups 2,4,6,8,10,12,14,16 (1,3,5,7,9,11,13,15 for console purposes).  Setup must be performed manually on the NETBRIDGE.  Once done, ShowRunner can use the CCT channels to provide CCT data to the fixtures.  Input from ShowRunnerCLC™ requires setting the scene recall for the CCT group to 255.  Any value of 0-254 will be sent to the CCT channel directly and the input from ShowRunnerCLC™ will be ignored.
13 +
3 3  ==== Typical Setup for up to 6 zones, 5 fixture types: ====
4 4  
5 5  (% border="1" style="width:600px" %)
... ... @@ -21,14 +21,6 @@
21 21  |14|-|-|Intensity
22 22  |15|-|-|Color
23 23  
24 -==== Caveats: ====
25 -
26 -* Only intensity/CCT fixtures are supported.  This will not work with warm/cool fixtures.
27 -* NETBRIDGE must be attached to the ZUMMESH-JBOX-DALI.  Only 1 ZUMMESH-JBOX-DALI is supported per room.  Use Zum Wired or DIN-DALI-2 if more capabilities are needed.
28 -* Supports up to 8 CCT channels, DALI Groups 2,4,6,8,10,12,14,16 (1,3,5,7,9,11,13,15 for console purposes)
29 -* Zum Scene must have the CCT channel set to 255 to accept input from ShowRunner.  Values of 0-254 will be sent directly to the group as fixed colors.
30 -* Setup must be done from the gateway console
31 -
32 32  ==== Setup Steps: ====
33 33  
34 34  1. Address all DALI drivers attached to the JBOX.  This can be done via the gateway console or via the Zum app on iOS/Android.