Skip to Content

Changes for page Zummesh Dynamic White/CCT

Last modified by Scott Kohlmann on 2023/04/21 14:09
From version 7.1
edited by Mark Kohlmann
on 2021/09/16 16:03
Change comment: There is no comment for this version
To version 10.1
edited by Scott Kohlmann
on 2023/04/21 14:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ User Guide & Wiki.Troubleshooting.WebHome
1 +SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.WebHome
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
1 +XWiki.scott\.kohlmann@chiefintegrations\.com
Content
... ... @@ -1,8 +1,8 @@
1 -Zum wireless supports dynamic white using DALI Groups 2,4,6,8,10,12,14,16 (1,3,5,7,9,11,13,15 for console purposes).  Setup must be performed manually on the NETBRIDGE.  Once done, ShowRunner can use the CCT channels to provide CCT data to the fixtures.  Input from ShowRunner requires setting the scene recall for the CCT group to 255.  Any value of 0-254 will be sent to the CCT channel directly and the input from ShowRunner will be ignored.
1 +Zum wireless supports dynamic white using DALI Groups 2,4,6,8,10,12,14,16 (1,3,5,7,9,11,13,15 for console purposes).  Setup must be performed manually on the NETBRIDGE.  Once done, ShowRunner can use the CCT channels to provide CCT data to the fixtures.  Input from ShowRunnerCLC™ requires setting the scene recall for the CCT group to 255.  Any value of 0-254 will be sent to the CCT channel directly and the input from ShowRunnerCLC™ will be ignored.
2 2  
3 3  ==== Typical Setup for up to 6 zones, 5 fixture types: ====
4 4  
5 -(% border="1" style="width:500px" %)
5 +(% border="1" style="width:600px" %)
6 6  |=DALI Group|=Name|=Fixture Type|=Control Type
7 7  |0|Downlights, Main|F0|Intensity
8 8  |1|Downlights, Main/Screen CCT|F0|Color
... ... @@ -48,7 +48,7 @@
48 48  Example: (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPSETTWRITE 8 14 1//
49 49  1. Set Scene settings for Color Support.  Enables or uses a fixed value for color temperature on color groups.
50 50  Command: rfrcon <**NetbridgeID**> DALIGROUPCOMMAND 4 <**GroupID**> <**SceneID**> <**SceneLevel**> <**Action**> <**FadeTime**>
51 -**GroupID**: 8 to 15
51 +**GroupID**: 0 to 15 (odd for color)
52 52  **SceneID**: Scene number (1 to 16)
53 53  **SceneLevel**: 255 for ShowRunner control, 0-254 for fixed scene level
54 54  **Action**: 0=Remove Scene, 1=Add Scene