Skip to Content

Changes for page Zummesh Dynamic White/CCT

Last modified by Scott Kohlmann on 2023/04/21 14:09
From version 6.1
edited by Mark Kohlmann
on 2021/09/07 22:45
Change comment: There is no comment for this version
To version 7.1
edited by Mark Kohlmann
on 2021/09/16 16:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,26 +1,24 @@
1 -Zum wireless supports dynamic white using DALI Groups 9-16 (8 to 15 for console purposes).  Setup must be performed manually on the NETBRIDGE.  Once done, ShowRunner can use the CCT channels to provide CCT data to the fixtures.  Input from ShowRunner requires setting the scene recall for the CCT group to 255.  Any value of 0-254 will be sent to the CCT channel directly and the input from ShowRunner will be ignored.
1 +Zum wireless supports dynamic white using DALI Groups 2,4,6,8,10,12,14,16 (1,3,5,7,9,11,13,15 for console purposes).  Setup must be performed manually on the NETBRIDGE.  Once done, ShowRunner can use the CCT channels to provide CCT data to the fixtures.  Input from ShowRunner requires setting the scene recall for the CCT group to 255.  Any value of 0-254 will be sent to the CCT channel directly and the input from ShowRunner will be ignored.
2 2  
3 3  ==== Typical Setup for up to 6 zones, 5 fixture types: ====
4 4  
5 -==== ====
6 -
7 7  (% border="1" style="width:500px" %)
8 8  |=DALI Group|=Name|=Fixture Type|=Control Type
9 9  |0|Downlights, Main|F0|Intensity
10 -|1|Accent Lights|F1a|Intensity
11 -|2|Spot Lights|F3|Intensity
12 -|3|Troffers|F4c|Intensity
13 -|4|Linear|F9|Intensity
14 -|5|Downlights @ Screen|F0|Intensity
15 -|6|-|-|Intensity
16 -|7|-|-|Intensity
17 -|8|Downlights CCT|F0|Color
18 -|9|Accent Lights CCT|F1a|Color
19 -|10|Spot Lights CCT|F3|Color
20 -|11|Troffers CCT|F4c|Color
21 -|12|Linear CCT|F9|Color
8 +|1|Downlights, Main/Screen CCT|F0|Color
9 +|2|Accent Lights|F1a|Intensity
10 +|3|Accent Lights CCT|F1a|Color
11 +|4|Spot Lights|F3|Intensity
12 +|5|Spot Lights CCT|F3|Color
13 +|6|Troffers|F4c|Intensity
14 +|7|Troffers CCT|F4c|Color
15 +|8|Linear|F9|Intensity
16 +|9|Linear|F9|Color
17 +|10|Downlights @ Screen|F0|Intensity
18 +|11|-|-|Color
19 +|12|-|-|Intensity
22 22  |13|-|-|Color
23 -|14|-|-|Color
21 +|14|-|-|Intensity
24 24  |15|-|-|Color
25 25  
26 26  ==== Caveats: ====
... ... @@ -27,7 +27,7 @@
27 27  
28 28  * Only intensity/CCT fixtures are supported.  This will not work with warm/cool fixtures.
29 29  * NETBRIDGE must be attached to the ZUMMESH-JBOX-DALI.  Only 1 ZUMMESH-JBOX-DALI is supported per room.  Use Zum Wired or DIN-DALI-2 if more capabilities are needed.
30 -* Supports up to 8 CCT channels, DALI Groups 9-16 (8 to 15 for console purposes)
28 +* Supports up to 8 CCT channels, DALI Groups 2,4,6,8,10,12,14,16 (1,3,5,7,9,11,13,15 for console purposes)
31 31  * Zum Scene must have the CCT channel set to 255 to accept input from ShowRunner.  Values of 0-254 will be sent directly to the group as fixed colors.
32 32  * Setup must be done from the gateway console
33 33