Skip to Content

Changes for page Zummesh Dynamic White/CCT

Last modified by Scott Kohlmann on 2023/04/21 14:09
From version 4.1
edited by Mark Kohlmann
on 2021/09/07 22:43
Change comment: There is no comment for this version
To version 6.1
edited by Mark Kohlmann
on 2021/09/07 22:45
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -26,7 +26,7 @@
26 26  ==== Caveats: ====
27 27  
28 28  * Only intensity/CCT fixtures are supported.  This will not work with warm/cool fixtures.
29 -* NETBRIDGE must be attached to the ZUMMESH-JOBX-DALI.  Only 1 ZUMMESH-JBOX-DALI is supported per room.  Use Zum Wired or DIN-DALI-2 if more capabilities are needed.
29 +* NETBRIDGE must be attached to the ZUMMESH-JBOX-DALI.  Only 1 ZUMMESH-JBOX-DALI is supported per room.  Use Zum Wired or DIN-DALI-2 if more capabilities are needed.
30 30  * Supports up to 8 CCT channels, DALI Groups 9-16 (8 to 15 for console purposes)
31 31  * Zum Scene must have the CCT channel set to 255 to accept input from ShowRunner.  Values of 0-254 will be sent directly to the group as fixed colors.
32 32  * Setup must be done from the gateway console
... ... @@ -56,4 +56,4 @@
56 56  **Action**: 0=Remove Scene, 1=Add Scene
57 57  **FadeTime**: Fade time in 1/10th of a second
58 58  Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 8 1 255 1 10//
59 -Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 15 1 255 8 10//
59 +Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 15 1 255 1 10//