Skip to Content

Changes for page Zummesh Dynamic White/CCT

Last modified by Scott Kohlmann on 2023/04/21 14:09
From version 2.1
edited by Mark Kohlmann
on 2021/09/07 21:29
Change comment: There is no comment for this version
To version 2.2
edited by Craig Lewis
on 2021/09/07 21:29
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
1 +XWiki.craig\.lewis@chiefintegrations\.com
Content
... ... @@ -1,8 +1,9 @@
1 1  Zum wireless supports dynamic white using DALI Groups 9-16 (8 to 15 for console purposes).  Setup must be performed manually on the NETBRIDGE.  Once done, ShowRunner can use the CCT channels to provide CCT data to the fixtures.  Input from ShowRunner requires setting the scene recall for the CCT group to 255.  Any value of 0-254 will be sent to the CCT channel directly and the input from ShowRunner will be ignored.
2 2  
3 -==== Typical Setup for up to 6 zones, 5 fixture types:
4 - ====
3 +==== Typical Setup for up to 6 zones, 5 fixture types: ====
5 5  
5 +==== ====
6 +
6 6  (% border="1" style="width:500px" %)
7 7  |=DALI Group|=Name|=Fixture Type|=Control Type
8 8  |0|Downlights, Main|F0|Intensity
... ... @@ -54,5 +54,5 @@
54 54  **SceneLevel**: 255 for ShowRunner control, 0-254 for fixed scene level
55 55  **AnalogInput**: Analog input to use from the control system, should be equal to **GroupID **- 7
56 56  **FadeTime**: Fade time in 1/10th of a second
57 -Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 8 1 255 1 10//
58 -Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 15 1 255 8 10//
58 +Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 8 1 255 1 10//
59 +Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 15 1 255 8 10//