Skip to Content

Changes for page Zummesh Dynamic White/CCT

Last modified by Mark Kohlmann on 2026/01/08 20:58
From version 15.1
edited by Mark Kohlmann
on 2026/01/08 20:56
Change comment: There is no comment for this version
To version 13.1
edited by Mark Kohlmann
on 2026/01/08 16:38
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -34,27 +34,6 @@
34 34  
35 35  ==== Setup Steps: ====
36 36  
37 -
38 -If your DALI groups are already commissioned and you need to specify the groups for color (Examples shown for group 7):
39 -
40 -1. Modify DALI Group to color, only needed if step 2 was not done.  If step 2 was performed skip this step.
41 -##Command: //rfrcon <**NetbridgeID**> DALIGROUPSETTWRITE <**GroupID**> 14 <**GroupType**>//
42 -**GroupID: **0 to 15
43 -**GroupType:** 0=Intensity, 1=Color
44 -Example: (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPSETTWRITE 7 14 1//##
45 -1. Set Scene settings for Color Support.  Enables or uses a fixed value for color temperature on color groups.  This must be done for all scenes that will be used.
46 -##Command: rfrcon <**NetbridgeID**> DALIGROUPCOMMAND 4 <**GroupID**> <**SceneID**> <**SceneLevel**> <**Action**> <**FadeTime**>
47 -**GroupID**: 0 to 15 (odd for color)
48 -**SceneID**: Scene number (1 to 16)
49 -**SceneLevel**: 255 for ShowRunner control, 0-254 for fixed scene level
50 -**Action**: 0=Remove Scene, 1=Add Scene
51 -**FadeTime**: Fade time in 1/10th of a second
52 -Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 7 1 255 1 10//
53 -Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 7 2 255 1 10//##
54 -
55 -
56 -If Starting from scratch without having been commissioned in the Zum App (Examples shown for group 7):
57 -
58 58  1. (((
59 59  Address all DALI drivers attached to the JBOX.  This can be done via the gateway console or via the Zum app on iOS/Android.
60 60  ##Command: //rfrcon <**NetbridgeID**> DALIGLOBALADDRESS <**Action**>//
... ... @@ -66,8 +66,13 @@
66 66  **GroupID: **0 to 15
67 67  **Operation:** 0=Delete Group, 1=Add Intensity Group, 3=Add Color Group
68 68  **GroupName: **Name of the group, no spaces, 16 characters max
69 -Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPADDDELETE 7 3 TypeF1-Color//##
70 -1. Set Scene settings for Color Support.  Enables or uses a fixed value for color temperature on color groups.  This must be done for all scenes that will be used.
48 +Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPADDDELETE 8 3 TypeF1-Color//##
49 +1. Modify DALI Group to color, only needed if step 2 was not done.  If step 2 was performed skip this step.
50 +##Command: //rfrcon <**NetbridgeID**> DALIGROUPSETTWRITE <**GroupID**> 14 <**GroupType**>//
51 +**GroupID: **0 to 15
52 +**GroupType:** 0=Intensity, 1=Color
53 +Example: (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPSETTWRITE 8 14 1//##
54 +1. Set Scene settings for Color Support.  Enables or uses a fixed value for color temperature on color groups.
71 71  ##Command: rfrcon <**NetbridgeID**> DALIGROUPCOMMAND 4 <**GroupID**> <**SceneID**> <**SceneLevel**> <**Action**> <**FadeTime**>
72 72  **GroupID**: 0 to 15 (odd for color)
73 73  **SceneID**: Scene number (1 to 16)
... ... @@ -74,5 +74,5 @@
74 74  **SceneLevel**: 255 for ShowRunner control, 0-254 for fixed scene level
75 75  **Action**: 0=Remove Scene, 1=Add Scene
76 76  **FadeTime**: Fade time in 1/10th of a second
77 -Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 7 1 255 1 10//
78 -Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 7 2 255 1 10//##
61 +Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 8 1 255 1 10//
62 +Example (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPCOMMAND 4 15 1 255 1 10//##