Skip to Content

Changes for page Zummesh Dynamic White/CCT

Last modified by Scott Kohlmann on 2023/04/21 14:09
From version 1.3
edited by Mark Kohlmann
on 2021/09/07 17:58
Change comment: There is no comment for this version
To version 1.5
edited by Mark Kohlmann
on 2021/09/07 18:21
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,25 +1,26 @@
1 1  Zum wireless supports dynamic white using DALI Groups 9-16 (8 to 15 for console purposes).  Setup must be performed manually on the NETBRIDGE.  Once done, ShowRunner can use the CCT channels to provide CCT data to the fixtures.  Input from ShowRunner requires setting the scene recall for the CCT group to 255.  Any value of 0-254 will be sent to the CCT channel directly and the input from ShowRunner will be ignored.
2 2  
3 -==== Typical Setup for up to 8 fixture types/zones:
3 +==== Typical Setup for up to 6 zones, 5 fixture types:
4 4   ====
5 5  
6 6  (% border="1" style="width:500px" %)
7 7  |=DALI Group|=Name|=Fixture Type|=Control Type
8 8  |0|Downlights, Main|F0|Intensity
9 -|1| |F1a|Intensity
10 -|2| |F3|Intensity
11 -|3| |F4c|Intensity
12 -|4| |F9|Intensity
13 -|5| |F0|Intensity
14 -| | | |
15 -| | | |
16 -| | | |
17 -| | | |
18 -| | | |
19 -| | | |
20 -| | | |
21 -| | | |
22 -| | | |
9 +|1|Accent Lights|F1a|Intensity
10 +|2|Spot Lights|F3|Intensity
11 +|3|Troffers|F4c|Intensity
12 +|4|Linear|F9|Intensity
13 +|5|Downlights @ Screen|F0|Intensity
14 +|6|-|-|Intensity
15 +|7|-|-|Intensity
16 +|8|Downlights CCT|F0|Color
17 +|9|Accent Lights CCT|F1a|Color
18 +|10|Spot Lights CCT|F3|Color
19 +|11|Troffers CCT|F4c|Color
20 +|12|Linear CCT|F9|Color
21 +|13|-|-|Color
22 +|14|-|-|Color
23 +|15|-|-|Color
23 23  
24 24  ==== Caveats: ====
25 25  
... ... @@ -46,4 +46,5 @@
46 46  **GroupID: **0 to 15
47 47  **GroupType:** 0=Intensity, 1=Color
48 48  Example: rfrcon (NETBRIDGE RF-ID 1A): //rfrcon 1A DALIGROUPSETTWRITE 8 14 1//
49 -1.
50 +1. Set Scene settings for Color Support:
51 +Command: rfrcon <**NetbridgeID**> DALIGROUPCOMMAND 4 <**GroupID**> <**SceneID**> <**SceneLevel**> <**AnalogInput**> <**FadeTime**>