Skip to Content

Zum Wired

Version 2.1 by Scott Kohlmann on 2021/09/16 20:35

Toolbox Text Console commands for setting up Zum Wired Systems:

  • autodiscovery query - Will generate a list of all network devices (Must be connected to one of your processors)
  • zwms - Tell which mode the ZUMNET-JBOX is in
  • zwms master (or slave) - Will set mode for ZUMNET-JBOX 
  • zwmode - Will tell if your ZUMNET-JBOX is setup for Zum or Cresnet
  • zwmode zum (or cnet) - Will set your Zum Op mode for your ZUMNET-JBOX